RV565: Cross-Layer Co-Design for Frame-Independent Video Playback on MicroPython-Class ESP32-S3 Systems

Video on SPI-attached microcontroller displays is limited less by decoding than by where each byte lives and which stages run serially. We present RV565, a decode framework for frame-independent video whose decoded representation is the panel's native RGB565 format, and evaluate it on an ESP32-S3 with two ten-second windows of an openly licensed film. A serial path - inflate, then scale into internal-memory stripes overlapped with SPI direct-memory-access (DMA) transfers - meets the 41.7 ms deadline on the lighter window but misses all 7,200 frames of the heavier one. RV565's dual-core pipeline inflates the next frame on the second core during the transfer and sustains 24 FPS with zero misses and 10.3 ms of slack on both windows; frame time then equals the display transfer, which runs at 98.1% of the 40 MHz wire-time bound. Because frames are independent, inflation time is linear in the compressed length stored in the container (pooled r^2 = 0.9987): a model fitted on one window predicts the other within 0.04 ms and identifies from metadata alone which window the serial path cannot schedule. We show why Deflate cannot exploit co-located temporal redundancy in RGB565 frames larger than 128x128 pixels and measure the price: a shared Deflate stream changes size by at most 1.1%, whereas an explicit XOR delta would save 46-80%. Inside OreoOS, a MicroPython application operating system, firmware inflation alone reaches 12.2 FPS; stage timing attributes the 80.4 ms frame time to serialized filesystem input, external-RAM placement, and blocking presentation, with 0.8 ms of interpreter overhead. Firmware, measurements, and analysis scripts are released.