new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 20

LoopCache: Accelerating Long-Context Self-Speculative Decoding for Looped Transformers

Looped Transformers achieve large effective depth with compact models by repeatedly applying a weight-shared block across R recurrent steps, each maintaining a loop-specific key-value (KV) cache. To accelerate sequential loop execution, recent wave-style self-speculative methods like WaveFront Decoding (WFD) and LoopSpec pipeline draft and target tokens across loops in a single step. However, they face two critical limitations. First, they draft only at fixed loops and ignore intermediate prediction changes, wasting computation on stale trajectories. Second, batching tokens from different loops loads up to Rx the KV cache per step, severely amplifying memory traffic in long-context scenarios. To address these challenges, we propose LoopCache, an efficient self-speculative decoding framework for long-context Looped Transformers. Based on the correlation between prediction switches and output confidence, LoopCache introduces confidence-guided dynamic draft updating to refine drafts in flight across all intermediate loops. Furthermore, LoopCache employs a cyclic loop KV cache strategy that rotates through loop-specific KV caches, restricting per-step KV traffic to a single loop while batching tokens at the nearest matching cycle for lossless verification. By also selectively retaining independent KV caches for a few loop-sensitive shallow layers, LoopCache improves acceptance rates with negligible overhead. Experiments show that LoopCache achieves average 10.25x and 14.56x speedup over WFD and LoopSpec.

  • 7 authors
·
Nov 17

Loop-μP: Residual Scaling and Hyperparameter Transfer in Looped Transformers

Looped Transformers have drawn growing attention because looping improves multi-step reasoning and increases the executed depth of a model without adding parameters. They achieve this by reusing a stack of L layers for N loops. However, increasing the loop count N not only destabilizes training but also shifts the best hyperparameters, so they must be searched again for every loop count. Inspired by Depth-μP (Yang et al., 2024), which multiplies each residual branch by L^{-1/2} for depth L so that a learning rate tuned on a shallow untied network transfers to a deep one, we study how the residual branches and the learning rate should scale with the loop count N. We find that loops cannot simply be treated as extra depth, because the loops share weights. At initialization, distinct layers add nearly uncorrelated increments to the residual stream, so their sum grows as L, whereas a shared layer adds positively correlated increments at every loop, so their sum grows linearly in N. For a single layer looped N times, we show in the infinite-width limit that multiplying the residual branch by 1/N and keeping the learning rate independent of N is the only parameterization with both a stable forward pass and maximal residual-stream updates. We then generalize the analysis to a stack of L distinct layers looped N times to obtain a parameterization we call Loop-μP, in which the loop factor 1/N combines with the depth factor L^{-1/2}. Empirically, we find in language modeling that the base learning rate tuned on the smallest model stays best under Loop-μP for loop counts up to 8 and executed depths up to 384 layers. These results make Loop-μP a practical recipe for scaling looped Transformers.

  • 7 authors
·
Oct 17

Looped Diffusion Transformer

Improving text-to-image models has traditionally relied on increasing model size or the number of denoising steps. In this work, we explore an alternative way to scale computation by repeatedly running shared Transformer blocks within each denoising step, effectively increasing computational depth while keeping the parameter count fixed. This looped computation enables iterative refinement of internal representations without explicit reasoning tokens. However, naive looping fails to consistently improve image quality. We trace this problem to weak supervision across intermediate loops and unregulated attention updates that progressively erode local information. To overcome these challenges, we propose Looped Diffusion Transformer (Looped-DiT), which combines deep supervision across intermediate loops with self-modulating attention to stabilize looped feature updates. Under matched-parameter and matched-compute settings, Looped-DiT consistently outperforms non-looped baselines. Notably, a 260M-parameter looped model can surpass a model 6.5x larger across multiple text-to-image benchmarks while requiring 4.9x lower inference compute. Beyond this performance gain, we find that looped computation can offer a more effective form of iterative computation for diffusion models, with increasing loop depth yielding larger gains than adding more denoising steps under a fixed inference budget. Furthermore, deeper loops can progressively correct mistakes made in earlier loops, exhibiting behaviors suggestive of latent reasoning. Together, these results show that looped computation offers a promising way to scale visual generation models.

  • 10 authors
·
Sep 29

Make Deep Networks Shallow Again

Deep neural networks have a good success record and are thus viewed as the best architecture choice for complex applications. Their main shortcoming has been, for a long time, the vanishing gradient which prevented the numerical optimization algorithms from acceptable convergence. A breakthrough has been achieved by the concept of residual connections -- an identity mapping parallel to a conventional layer. This concept is applicable to stacks of layers of the same dimension and substantially alleviates the vanishing gradient problem. A stack of residual connection layers can be expressed as an expansion of terms similar to the Taylor expansion. This expansion suggests the possibility of truncating the higher-order terms and receiving an architecture consisting of a single broad layer composed of all initially stacked layers in parallel. In other words, a sequential deep architecture is substituted by a parallel shallow one. Prompted by this theory, we investigated the performance capabilities of the parallel architecture in comparison to the sequential one. The computer vision datasets MNIST and CIFAR10 were used to train both architectures for a total of 6912 combinations of varying numbers of convolutional layers, numbers of filters, kernel sizes, and other meta parameters. Our findings demonstrate a surprising equivalence between the deep (sequential) and shallow (parallel) architectures. Both layouts produced similar results in terms of training and validation set loss. This discovery implies that a wide, shallow architecture can potentially replace a deep network without sacrificing performance. Such substitution has the potential to simplify network architectures, improve optimization efficiency, and accelerate the training process.

  • 3 authors
·
Sep 15, 2023

Looping Beyond Twice: A Scalable Recipe for Looped Mixture-of-Experts

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

RecurTrace: Adaptive Latent Reasoning with Loop-Time Memory

Repeating a small block of middle layers increases a language model's effective inference depth without adding parameters or generating extra tokens, and recent work shows that this latent recurrence improves reasoning. However, two design choices limit these gains. Each iteration sees only the previous output and cannot directly access earlier computations. Moreover, a fixed loop count wastes depth on easy inputs while leaving hard ones with too little computation. We introduce RecurTrace, which addresses both limitations using the loop's own trajectory. Specifically, Loop Memory Attention lets each looped layer attend to its own states from previous iterations along the loop-time axis, so the model can revisit earlier computations instead of relying on the latest state alone. A halting head then reads the loop state and predicts whether to continue, with supervision from an oracle that identifies when additional depth still reduces loss. In a controlled MathQA comparison on the same looped backbone, RecurTrace achieves 56.9% accuracy with an average of 2.0 loops, exceeding the best fixed loop depth by 2.2 points at matched compute. By comparison, ACT and PonderNet collapse to one loop, and CALM reaches only 54.1% with 5.6 loops, while the stronger LoopUS-Conf and TaH-Mismatch baselines reach 55.3% at 3.2 loops and 55.7% at 2.1 loops. Finally, RecurTrace improves generation accuracy over same-budget fine-tuned baselines at 0.6B, 1.7B, 4B, and 8B, with the gain growing with model size from 0.6 to 3.4 points.

  • 6 authors
·
Sep 9

LoopUS: Recasting Pretrained LLMs into Looped Latent Refinement Models

Looped computation shows promise in improving the reasoning-oriented performance of LLMs by scaling test-time compute. However, existing approaches typically require either training recurrent models from scratch or applying disruptive retrofits, which involve substantial computational costs and may compromise pretrained capabilities. To address these limitations, we introduce Looped Depth Up-Scaling (LoopUS), a post-training framework that converts a standard pretrained LLM into a looped architecture. As a key technical contribution, LoopUS recasts the pretrained LLM into an encoder, a looped reasoning block, and a decoder. It operationalizes this latent-refinement architecture through four core components: (1) block decomposition, guided by staged representation dynamics; (2) an input-dependent selective gate to mitigate hidden-state drift; (3) random deep supervision for memory-efficient learning over long recursive horizons; and (4) a confidence head for adaptive early exiting. Collectively, these mechanisms transform a standard non-looped model into a looped form while stabilizing it against both computational bottlenecks and representation collapse. Through stable latent looping, LoopUS improves reasoning-oriented performance without extending the generated traces or requiring recurrent training from scratch. For more details, see https://thrillcrazyer.github.io/LoopUS

ARLoop: Fully-Open Pre-trained Looped Transformers with Attention Residuals

Looped transformers increase effective depth by repeatedly applying a shared set of transformer layers, offering a parameter-efficient way to scale computation. However, standard residual connections aggregate information across recurrent depth into a single stream, providing limited control over which intermediate representations from preceding layers should be reused. In this paper, we introduce ARLoop, a looped transformer architecture based on attention residuals, where the input of each layer is selectively aggregated through attention over model depth. Distinct from standard transformers, we find that looped transformers do not require access to the full residual history: sliding-window depth attention matches or outperforms full-history attention at larger recurrent depths. Across controlled experiments with multiple parameter scales (140M and 370M) and recurrent depths (R = 1 to 5), ARLoop consistently outperforms prior residual designs for looped transformers. More importantly, we further scale ARLoop to 0.6B and 1.2B parameters under a realistic LLM pretraining recipe, demonstrating that the gains transfer to realistic pretraining, with particularly strong improvements on math and coding tasks. Our 1.2B model, pretrained on only 0.5T tokens with three recurrences, outperforms Huginn-3.5B (the only fully-open looped LLM as of our release date) across all evaluated tasks and is competitive with similar-sized non-looped models such as Qwen3.5-2B despite being trained on substantially less data.

  • 4 authors
·
Nov 2

Scaling to Tens of Thousands of Test-Time Iterations with Loop-Native Attention Residuals

In this paper, we argue that looped Transformers need their own residual connections to prevent performance degradation as the number of iterations grows. We observe that increasing loop iterations can reduce reasoning accuracy: noisy state updates overwrite correct intermediate deductions and even undo completed solutions. This leaves subsequent iterations to recover lost information from an already degraded representation: once an error arises in an earlier loop, often as a result of long-range propagation through the recurrence, later loops find it difficult to correct. In this paper, we introduce InfiLoop, a loop-native residual connection that learns which past computations to retain and how much to accept from each new update. InfiLoop combines content-based weighting with learned temporal decay to maintain a running summary of recurrent states. An exact streaming recurrence keeps its persistent aggregation memory constant as the loop count grows. The resulting adaptive update suppresses unreliable proposals and preserves useful intermediate states. Across extensive reasoning tasks, a 7M-parameter InfiLoop model outperforms existing recursive architectures, reaching 97.9% exact accuracy on Sudoku-Extreme, and 13.6% pass@2 on ARC-AGI-2. Notably, on Sudoku-Extreme, InfiLoop continues to improve with test-time looping beyond 20,000 effective steps, showing that added depth translates directly into stronger reasoning. Our code is available at https://github.com/pixeli99/InfiLoop.

  • 6 authors
·
Oct 7 2

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

  • 19 authors
·
Jun 15 4

Reasoning with Latent Thoughts: On the Power of Looped Transformers

Large language models have shown remarkable reasoning abilities and scaling laws suggest that large parameter count, especially along the depth axis, is the primary driver. In this work, we make a stronger claim -- many reasoning problems require a large depth but not necessarily many parameters. This unlocks a novel application of looped models for reasoning. Firstly, we show that for many synthetic reasoning problems like addition, p-hop induction, and math problems, a k-layer transformer looped L times nearly matches the performance of a kL-layer non-looped model, and is significantly better than a k-layer model. This is further corroborated by theoretical results showing that many such reasoning problems can be solved via iterative algorithms, and thus, can be solved effectively using looped models with nearly optimal depth. Perhaps surprisingly, these benefits also translate to practical settings of language modeling -- on many downstream reasoning tasks, a language model with k-layers looped L times can be competitive to, if not better than, a kL-layer language model. In fact, our empirical analysis reveals an intriguing phenomenon: looped and non-looped models exhibit scaling behavior that depends on their effective depth, akin to the inference-time scaling of chain-of-thought (CoT) reasoning. We further elucidate the connection to CoT reasoning by proving that looped models implicitly generate latent thoughts and can simulate T steps of CoT with T loops. Inspired by these findings, we also present an interesting dichotomy between reasoning and memorization, and design a looping-based regularization that is effective on both fronts.

  • 5 authors
·
Feb 24, 2025

ShallowStream: Index Shallow then Answer Deep for Streaming Video Understanding

Streaming video understanding is a critical capability for real-world applications, including embodied intelligence, autonomous driving, industrial monitoring, surveillance and early warning, and wearable assistants. However, processing continuous video streams with multimodal large language models (MLLMs) is computationally expensive. Existing efforts have explored reducing streaming overhead through visual token pruning, token merging, quantization, on-demand frame retrieval, and context offloading. However, most existing methods overlook the dimension of model depth. Repeatedly executing full-depth MLLM prefill over incoming frames is prohibitively expensive, incurring substantial computational overhead and causing the KV cache to grow at a rate directly proportional to the prefill depth. To address these challenges, we propose ShallowStream, a novel framework that leverages the shallow layers of an MLLM to simultaneously perform frame encoding and retrieval index building. During stream processing, ShallowStream maintains an always-on lightweight index using the KV cache of shallow layers. During query-time answering, we leverage the attention scores generated by the shallow layers to score context frames and employ a diversity-aware selection strategy to retrieve precise and comprehensive evidence. ShallowStream achieves performance on par with the strongest existing streaming methods, while reducing per-frame prefill latency and 10-second end-to-end latency by up to 52.1x and 11.9x, respectively. Our code is available at https://github.com/CURRENTF/ShallowStream.

  • 4 authors
·
Sep 1 2

LoopVQ: Sub 1-bit KV Cache Quantization for Looped Transformers

Looped transformers are a parameter-efficient alternative to standard transformers for language modeling. By reapplying the same layers across multiple loop steps, recent looped language models match the performance of non-looped models several times their size. While this architecture effectively reduces parameter memory, each loop step still stores its own keys and values, so the key-value (KV) cache grows linearly with the number of loop steps and becomes the main memory bottleneck. We observe that the KV cache of looped models is highly redundant along the loop axis and that the loop steps differ substantially in their sensitivity to quantization. Based on these observations, we propose LoopVQ, a KV cache vector quantization method for looped transformers that codes channels of multiple loop steps jointly, and fine-tunes the codebooks to match the output of the full-precision model. At 0.5 bits per element, LoopVQ outperforms existing KV cache vector quantization methods for standard LLMs on general, long chain-of-thought reasoning, and long-context retrieval tasks with Ouro and Huginn models. Its design is orthogonal to these methods, and combined with TaSQ, it retains much of the BF16 accuracy even at 0.25 bits per element. We also implement LoopVQ in SGLang, where it nearly halves the decode latency at a 32K-token context and raises the peak serving throughput by up to 4.3times and 6.1times on the 1.4B and 2.6B Ouro models compared to the BF16 baseline.

SliderQuant: Accurate Post-Training Quantization for LLMs

In this paper, we address post-training quantization (PTQ) for large language models (LLMs) from an overlooked perspective: given a pre-trained high-precision LLM, the predominant sequential quantization framework treats different layers equally, but this may be not optimal in challenging bit-width settings. We empirically study the quantization impact of different layers on model accuracy, and observe that: (1) shallow/deep layers are usually more sensitive to quantization than intermediate layers; (2) among shallow/deep layers, the most sensitive one is the first/last layer, which exhibits significantly larger quantization error than others. These empirical observations imply that the quantization design for different layers of LLMs is required on multiple levels instead of a single level shared to all layers. Motivated by this, we propose a new PTQ framework termed Sliding-layer Quantization (SliderQuant) that relies on a simple adaptive sliding quantization concept facilitated by few learnable parameters. The base component of SliderQuant is called inter-layer sliding quantization, which incorporates three types of novel sliding window designs tailored for addressing the varying quantization sensitivity of shallow, intermediate and deep layers. The other component is called intra-layer sliding quantization that leverages an incremental strategy to quantize each window. As a result, SliderQuant has a strong ability to reduce quantization errors across layers. Extensive experiments on basic language generation, zero-shot commonsense reasoning and challenging math and code tasks with various LLMs, including Llama/Llama2/Llama3/Qwen2.5 model families, DeepSeek-R1 distilled models and large MoE models, show that our method outperforms existing PTQ methods (including the latest PTQ methods using rotation transformations) for both weight-only quantization and weight-activation quantization.

  • 6 authors
·
Mar 25

Do Language Models Use Their Depth Efficiently?

Modern LLMs are increasingly deep, and depth correlates with performance, albeit with diminishing returns. However, do these models use their depth efficiently? Do they compose more features to create higher-order computations that are impossible in shallow models, or do they merely spread the same kinds of computation out over more layers? To address these questions, we analyze the residual stream of the Llama 3.1 and Qwen 3 family of models. We find: First, comparing the output of the sublayers to the residual stream reveals that layers in the second half contribute much less than those in the first half, with a clear phase transition between the two halves. Second, skipping layers in the second half has a much smaller effect on future computations and output predictions. Third, for multihop tasks, we are unable to find evidence that models are using increased depth to compose subresults in examples involving many hops. Fourth, we seek to directly address whether deeper models are using their additional layers to perform new kinds of computation. To do this, we train linear maps from the residual stream of a shallow model to a deeper one. We find that layers with the same relative depth map best to each other, suggesting that the larger model simply spreads the same computations out over its many layers. All this evidence suggests that deeper models are not using their depth to learn new kinds of computation, but only using the greater depth to perform more fine-grained adjustments to the residual. This may help explain why increasing scale leads to diminishing returns for stacked Transformer architectures.

  • 3 authors
·
May 20, 2025

Closing the Loop: Practical Training Recipes for Looped Language Models

Looped language models increase effective depth by repeatedly applying a shared block of layers, but existing large-scale recipes require multi-stage training over trillions of tokens, while the benefits of recurrence remain difficult to separate from differences in data and training. In this work, we establish practical training recipes for looped language models, with three main results. (1) We develop a compute-efficient from-scratch pipeline that reduces the training budget from 7.7T tokens in Ouro to 310B tokens while retaining strong reasoning performance. Pretraining followed by high-quality mid-training, together with learning-rate warmup and stronger exit-gate regularization, enables stable recurrent training without prior multi-stage schedules. (2) Under controlled comparisons, our 1.4B LoopLM outperforms a parameter-matched dense model trained on the same data and token budget on all 12 evaluated benchmarks, including +14 points on GSM8K, +10 on MATH, and +22 on DROP. At matched inference compute, it approaches a 3.9B dense model on mathematical reasoning and reading comprehension while using only 36\% as many parameters. (3) We introduce a minimal recipe for converting pretrained dense models into looped ones: a single learned input-mixing scalar and a smoothed exit loss, with no step-specific parameters. Applied to Qwen3-1.7B-Base, Looped Qwen improves over an identically continued dense baseline on every evaluated benchmark across two data regimes, with statistically clear gains on GSM8K, MATH, and MMLU-Pro on the curated mixture. Together, these results make looped language models substantially cheaper to train from scratch and practical to introduce into existing pretrained checkpoints, while isolating the gains due to recurrence itself.

  • 8 authors
·
Sep 29

ARC Prize 2025: Technical Report

The ARC-AGI benchmark series serves as a critical measure of few-shot generalization on novel tasks, a core aspect of intelligence. The ARC Prize 2025 global competition targeted the newly released ARC-AGI-2 dataset, which features greater task complexity compared to its predecessor. The Kaggle competition attracted 1,455 teams and 15,154 entries, with the top score reaching 24% on the ARC-AGI-2 private evaluation set. Paper submissions nearly doubled year-over-year to 90 entries, reflecting the growing research interest in fluid intelligence and abstract reasoning. The defining theme of 2025 is the emergence of the refinement loop -- a per-task iterative program optimization loop guided by a feedback signal. Refinement loops come in a variety of forms, in particular evolutionary program synthesis approaches and application-layer refinements to commercial AI systems. Such refinement loops are also possible in weight space, as evidenced by zero-pretraining deep learning methods which are now achieving competitive performance with remarkably small networks (7M parameters). In parallel, four frontier AI labs (Anthropic, Google DeepMind, OpenAI, and xAI) reported ARC-AGI performance in public model cards in 2025, establishing ARC-AGI as an industry standard benchmark for AI reasoning. However, our analysis indicates that current frontier AI reasoning performance remains fundamentally constrained to knowledge coverage, giving rise to new forms of benchmark contamination. In this paper, we survey the top-performing methods, examine the role of refinement loops in AGI progress, discuss knowledge-dependent overfitting, and preview ARC-AGI-3, which introduces interactive reasoning challenges that require exploration, planning, memory, goal acquisition, and alignment capabilities.

  • 4 authors
·
Jan 15

Saturation Makes Quantization Error Additive: A Coverage Model with a Certificate

Mixed-precision quantization must decide which parts of a model to keep at higher precision. A common premise, shared by sensitivity-based methods such as HAWQ and CoopQ, is that the loss from quantizing a set of layers can be reconstructed from per-layer or pairwise sensitivities measured in isolation. We test this premise at the 4-bit weight-and-activation precisions now being deployed, treating the change in loss f(S) from quantizing a layer set S as a set function on the Boolean cube and analyzing it through two classical changes of basis. This analysis yields two findings. First, across configurations drawn from the deployment distribution, 85--93\% of the variance of f is explained by per-layer effects alone. Second, a monotone transform of a sum of per-layer terms reproduces f's ranking of configurations, misordering at most 2\% of pairs. We propose the coverage model f(S)=cbigl(1-prod_{iin S}(1-a_i)bigr), which reproduces the measured variance profile of f to within a few percent from its L fitted break-rates. This structure supports two predictors of a configuration's loss, each with L+1 parameters. The additive model is the optimal first-order predictor. By Parseval's identity its mean-squared error equals the variance of f left unexplained by per-layer effects, which we measure on full lattices, estimate out of sample at full-network scale, and report with every result as a certificate of how well any additive model can do. The coverage model itself is the second predictor. As allocators at matched memory, they attain the lowest KL divergence among the compared allocators on models from 30B to 355B parameters. Below four bits, the resulting allocations continue to solve code and reasoning tasks at budgets where allocations from gradient sensitivities no longer produce terminating generations.

  • 1 authors
·
Jul 13

M-plicits: Neural Implicit Surfaces via Nested Multiscale Residuals

Encoding input coordinates with sinusoidal functions into multi-layer perceptrons (MLPs) has proven effective for implicit neural representations (INRs) of surfaces defined as zero-level sets. However, existing methods often struggle to balance training efficiency, rendering speed, and noise robustness: single-MLP approaches are expensive at inference, grid-based representations are fast but can limit surface smoothness and overfit input noise, and previous multiscale approaches frequently capture noise and produce artifacts due to hard spectral truncation. To address these limitations, we propose M-plicits, a multiscale framework that models surfaces as a residual sum of MLPs trained via a sequence of nested neighborhoods. Unlike existing residual approaches that rely on standard domain-wide sampling and require costly mesh extraction for visualization, our method strictly localizes supervision to narrow bands around the previous zero-level sets. This nested design naturally provides robustness against noisy input data: the coarse network acts as a low-pass filter that establishes a clean geometric prior, while subsequent residuals progressively refine the geometry without fitting to high-frequency artifacts. We further introduce a multiscale sphere-tracing algorithm and a GEMM-based analytical normal computation that bypasses auto-differentiation entirely, yielding high-fidelity real-time rendering. On Stanford and Thingi32, M-plicits achieves the best mean Chamfer distance in the coarse configuration and the best median Chamfer distance and IoU in the fine configuration, with substantially better noise robustness than iNGP, BACON, and IDF, while using an order of magnitude fewer parameters than grid-based baselines. Code, models, and data are available at https://github.com/dsilvavinicius/m-plicits.

  • 11 authors
·
Sep 24

Parcae: Scaling Laws For Stable Looped Language Models

Traditional fixed-depth architectures scale quality by increasing training FLOPs, typically through increased parameterization, at the expense of a higher memory footprint, or data. A potential alternative is looped architectures, which instead increase FLOPs by sending activations through a block of layers in a loop. While promising, existing recipes for training looped architectures can be unstable, suffering from residual explosion and loss spikes. We address these challenges by recasting looping as a nonlinear time-variant dynamical system over the residual stream. Via a linear approximation to this system, we find that instability occurs in existing looped architectures as a result of large spectral norms in their injection parameters. To address these instability issues, we propose Parcae, a novel stable, looped architecture that constrains the spectral norm of the injection parameters via discretization of a negative diagonal parameterization. As a result, Parcae achieves up to 6.3% lower validation perplexity over prior large-scale looped models. Using our stable looped architecture, we investigate the scaling properties of looping as a medium to improve quality by increasing FLOPs in training and test-time. For training, we derive predictable power laws to scale FLOPs while keeping parameter count fixed. Our initial scaling laws suggest that looping and data should be increased in tandem, given a fixed FLOP budget. At test-time, we find that Parcae can use looping to scale compute, following a predictable, saturating exponential decay. When scaled up to 1.3B parameters, we find that Parcae improves CORE and Core-Extended quality by 2.99 and 1.18 points when compared to strong Transformer baselines under a fixed parameter and data budget, achieving a relative quality of up to 87.5% a Transformer twice the size.

Looped Latent Attention: Cross-Loop KV Compression for Looped Transformers

Looped, weight-tied Transformers reduce parameters by reusing a single block, but decoding still stores a separate K/V cache for every recurrence step. We show that this loop-indexed cache is highly structured. For a fixed token, layer and head, K/V vectors trace a short low-rank trajectory across loops, while the head and layer axes remain much flatter. We introduce Looped Latent Attention (), a post-training cache codec that stores compact K and V latents and reconstructs loop-specific K/V vectors only when attention reads them. The default per-head codec compresses recurrence, while -2D also folds heads into one latent for the extreme-compression regime. The codec is initialized from the SVD of teacher activations and refined with logit and attention-output distillation. At matched cache budget, per-head outperforms head-axis MLA, cross-layer sharing, KV quantization and final-loop reuse, showing that the recurrent cache is low-rank but not safely collapsible to a single state. The same axis advantage holds on Ouro-2.6B-Thinking and transfers to Huginn-3.5B, where an SVD codec remains near-lossless to 32times compression in decoder-independent evaluation. The cache reduction is exact. On one H200, the latent-store path increases measured Ouro-1.4B batch capacity at 4k context from 32 to 768 sequences at 21.3times compression. Lastly, for long reasoning rollouts such as in MATH-500, on-policy refinement on student-generated prefixes raises accuracy at 4times compression from 0.43 to 0.66 and reduces no-answer generations when compared to token-level off-policy distillation.

  • 2 authors
·
Jul 23

LoopMoE: Unifying Iterative Computation with Mixture-of-Experts for Language Modeling

Mixture-of-Experts (MoE) and looped architectures scale models along two orthogonal axes, namely parameter capacity and effective depth. However, mainstream looped architectures rely on dense backbones that couple parameter count with per-token FLOPs, which makes it impossible to isolate the effect of iterative computation under matched budgets. To this end, we present LoopMoE, a looped MoE language model that integrates sparse routing with iterative weight-shared computation through two designs. The first is IterAdaLN, which resolves weight-sharing symmetry via a modulation signal jointly conditioned on the iteration index and the per-token hidden state. The second is a capacity-balancing strategy that recovers the attention-to-FFN active parameter ratio of well-tuned non-looped references. Together, these designs enable the first strictly controlled, head-to-head evaluation of a looped MoE against a Vanilla MoE under identical total parameters, per-token FLOPs, and active sublayer ratios. At the 3B scale, LoopMoE outperforms the Vanilla MoE on 8 of 9 downstream benchmarks with an average improvement exceeding 1 point. At the 9B scale, LoopMoE continues to outperform the matched Vanilla MoE, indicating that the architectural gain persists at larger scale. Our work establishes a controlled synthesis of sparsity and recurrence, and suggests a promising direction for looped language models.

  • 6 authors
·
Jun 2

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of 1.81times over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

  • 3 authors
·
Sep 22

LayerRoPE: Dynamic Depth-wise Magnitude & Angular Superposition

As data propagates through a Transformer, the norm of its hidden states grows by orders of magnitude with depth, a phenomenon framed as 'curse of depth' and nearly universally treated as a pathology to be suppressed. We take the opposite view. Across 16 pre-trained LLMs from 9 families, spanning dense, mixture-of-experts and hybrid architectures and Pre-, Peri- and Post-Norm designs, we find that this growth reflects an emergent depth-positional encoding, carried by the only learned per-layer gain on the residual stream, the normalization weight γ: with depth, γ grows in magnitude and rotates in direction, jointly encoding the layer index. We make this depth-conditioned encoding explicit with LayerRoPE, an implicit analog of RoPE along the depth axis, which replaces all layerwise γ vectors with a single shared vector and depth-conditioned scalars, at a net reduction in parameters and <0.02% change in FLOPs. Across a model ladder scaled up to 100B+ tokens, LayerRoPE consistently outperforms Pre-, Post- and Peri-Norm and Layer-Norm Scaling, reaching Pre-Norm's 1.3B loss with 3.4times less compute; LayerRoPE is the only approach that shows strong convergence and improves near monotonically as depth scales to 512 layers. It improves learning-rate sensitivity by 3-10times, and transfers naively to and consistently improves looped latent models and Vision Transformers. Inspecting its learned schedule inverts the prevailing premise: LayerRoPE does not shrink the residual stream but widens it, damping what each block reads while amplifying what it writes. Depth stability, our results suggest, calls not for suppressing the residual stream, but for depth-conditioned regulation of the computational blocks it feeds.

  • 2 authors
·
Oct 5

LayerBoost: Layer-Aware Attention Reduction for Efficient LLMs

Transformers are mostly relying on softmax attention, which introduces quadratic complexity with respect to sequence length and remains a major bottleneck for efficient inference. Prior work on linear or hybrid attention typically replaces softmax attention uniformly across all layers, often leading to significant performance degradation or requiring extensive retraining to recover model quality. This work proposes LayerBoost, a layer-aware attention reduction method that selectively modifies the attention mechanism based on the sensitivity of individual transformer layers. It first performs a systematic sensitivity analysis on a pretrained model to identify layers that are critical for maintaining performance. Guided by this analysis, three distinct strategies can be applied: retaining standard softmax attention in highly sensitive layers, replacing it with linear sliding window attention in moderately sensitive layers, and removing attention entirely in layers that exhibit low sensitivity. To recover performance after these architectural modifications, we introduce a lightweight distillation-based healing phase requiring only 10M additional training tokens. LayerBoost reduces inference latency and improves throughput by up to 68% at high concurrency, while maintaining competitive model quality. It matches base model performance on several benchmarks, exhibits only minor degradations on others, and significantly outperforms state-of-the-art attention linearization methods. These efficiency gains make our method particularly well-suited for high-concurrency serving and hardware-constrained deployment scenarios, where inference cost and memory footprint are critical bottlenecks.

  • 6 authors
·
May 13

Improving Test-Time Scaling with Adaptive Looped Transformers

Looped transformers have demonstrated promising parameter efficiency by reusing layers for latent computation. Prior studies compare looped and non-looped models at matched parameters or per-token FLOPs. However, to the best of our knowledge, whether looping improves test-time scaling as outputs grow longer remains underexplored. Through post-training looped transformers, we study the accuracy-compute slope, measured as the accuracy gain per doubling of test-time decoding FLOPs. We find that existing looped transformers often yield steeper slopes than their non-looped baseline, yet underperform it at matched compute. While fixed-depth looping spends extra iterations on every token, our analysis shows that many tokens do not benefit from extra iterations. We therefore propose TaH2, which enables the model to focus extra iterations on the tokens that benefit from looping. It jointly post-trains the backbone and an iteration decider through lookahead depth supervision, which uses online labels indicating whether further iteration improves the prediction. TaH2 improves both the efficiency and attainable accuracy of test-time scaling. On challenging AIME benchmarks, TaH2 improves the accuracy-compute slope by 53% (2.74 vs. 1.79) over the non-looped baseline, exceeding the baseline's peak accuracy by about 3.4 points at matched test-time compute. As the maximum iteration depth increases, existing looped models largely plateau, while TaH2's gain over the non-looped baseline continues to grow from +2.8 points at depth 2 to +3.9 points at depth 8. Our code is available at https://github.com/thu-nics/TaH.

What Makes Recurrence Effective in Looped Language Models?

Looped language models (LoopLMs) increase computational depth through parameter sharing, offering a path to scale inference computation without adding parameters. However, it remains unclear when additional recurrence is beneficial and how architectural choices affect its effectiveness. Through controlled experiments, we systematically examine (1) when recurrence helps, (2) where it should be applied, and (3) how its conditioning affects performance. Our evaluation covers inference budgets below, within, and beyond the training horizon under knowledge and reasoning tasks. (1) We find that recurrence can improve reasoning beyond the training horizon while degrading knowledge performance, but harder reasoning instances do not consistently benefit more. (2) Performance also depends on how distinct layers and recurrent iterations are allocated, showing that effective depth alone is insufficient to predict behavior. Non-recurrent output layers improve robustness to under-unrolling, while the preferred placement of input and output layers varies with inference budget. (3) Finally, we find that conventional initial-state injection offers limited robustness to varying recurrence depth. We therefore propose history-state injection as an alternative, and show that channel-wise history-state injection combined with timestep conditioning offers a low-cost and more effective design, better preserving knowledge under extended unrolling while improving robustness across inference budgets. Overall, our results clarify when recurrent computation helps, where it fails, and offer practical guidelines for designing LoopLMs across variable inference budgets.

Robust Weight Signatures: Gaining Robustness as Easy as Patching Weights?

Given a robust model trained to be resilient to one or multiple types of distribution shifts (e.g., natural image corruptions), how is that "robustness" encoded in the model weights, and how easily can it be disentangled and/or "zero-shot" transferred to some other models? This paper empirically suggests a surprisingly simple answer: linearly - by straightforward model weight arithmetic! We start by drawing several key observations: (1)assuming that we train the same model architecture on both a clean dataset and its corrupted version, resultant weights mostly differ in shallow layers; (2)the weight difference after projection, which we call "Robust Weight Signature" (RWS), appears to be discriminative and indicative of different corruption types; (3)for the same corruption type, the RWSs obtained by one model architecture are highly consistent and transferable across different datasets. We propose a minimalistic model robustness "patching" framework that carries a model trained on clean data together with its pre-extracted RWSs. In this way, injecting certain robustness to the model is reduced to directly adding the corresponding RWS to its weight. We verify our proposed framework to be remarkably (1)lightweight. since RWSs concentrate on the shallowest few layers and we further show they can be painlessly quantized, storing an RWS is up to 13 x more compact than storing the full weight copy; (2)in-situ adjustable. RWSs can be appended as needed and later taken off to restore the intact clean model. We further demonstrate one can linearly re-scale the RWS to control the patched robustness strength; (3)composable. Multiple RWSs can be added simultaneously to patch more comprehensive robustness at once; and (4)transferable. Even when the clean model backbone is continually adapted or updated, RWSs remain as effective patches due to their outstanding cross-dataset transferability.

  • 3 authors
·
Feb 24, 2023

FlashLoop: Fast and Memory-Efficient Looped Transformers via Lazy Updates

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64times end-to-end speedup and up to 6times KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

  • 2 authors
·
Sep 23 1

HelixSurf: A Robust and Efficient Neural Implicit Surface Learning of Indoor Scenes with Iterative Intertwined Regularization

Recovery of an underlying scene geometry from multiview images stands as a long-time challenge in computer vision research. The recent promise leverages neural implicit surface learning and differentiable volume rendering, and achieves both the recovery of scene geometry and synthesis of novel views, where deep priors of neural models are used as an inductive smoothness bias. While promising for object-level surfaces, these methods suffer when coping with complex scene surfaces. In the meanwhile, traditional multi-view stereo can recover the geometry of scenes with rich textures, by globally optimizing the local, pixel-wise correspondences across multiple views. We are thus motivated to make use of the complementary benefits from the two strategies, and propose a method termed Helix-shaped neural implicit Surface learning or HelixSurf; HelixSurf uses the intermediate prediction from one strategy as the guidance to regularize the learning of the other one, and conducts such intertwined regularization iteratively during the learning process. We also propose an efficient scheme for differentiable volume rendering in HelixSurf. Experiments on surface reconstruction of indoor scenes show that our method compares favorably with existing methods and is orders of magnitude faster, even when some of existing methods are assisted with auxiliary training data. The source code is available at https://github.com/Gorilla-Lab-SCUT/HelixSurf.

  • 4 authors
·
Feb 28, 2023

Layer-Wise Quantization: A Pragmatic and Effective Method for Quantizing LLMs Beyond Integer Bit-Levels

We present a simple meta quantization approach that quantizes different layers of a large language model (LLM) at different bit levels, and is independent of the underlying quantization technique. Specifically, we quantize the most important layers to higher bit precision and less important layers to lower bits. We propose two effective strategies to measure the importance of layers within LLMs: the first measures the importance of a layer based on how different its output embeddings are from the input embeddings (higher is better); the second estimates the importance of a layer using the number of layer weights that are much larger than average (smaller is better). We show that quantizing different layers at varying bits according to our importance scores results in minimal performance drop with a far more compressed model size. Finally, we present several practical key takeaways from our variable layer-wise quantization experiments: (a) LLM performance under variable quantization remains close to the original model until 25-50% of layers are moved in lower quantization using our proposed ordering but only until 5-10% if moved using no specific ordering; (b) Adding layer importance to inherently dynamic quantization techniques can further improve their performance, showing that our approach is complementary to other dynamic quantization methods; (c) Quantizing LLMs to lower bits performs substantially better than pruning unless extreme quantization (2-bit) is used; and (d) Layer-wise quantization to lower bits works better in the case of larger LLMs with more layers compared to smaller LLMs with fewer layers. Our code is publicly available at https://github.com/RazvanDu/LayerwiseQuant/.

  • 6 authors
·
Jun 25, 2024

One Model to Loop Them All: Elastic Latent Recurrence for Language Models

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

nvidia NVIDIA
·
Oct 7 3

Rethinking Prototype-based Similarity Learning for Few-Shot Object Detection

Few-shot object detection aims to detect novel object categories from only a few labeled examples, avoiding costly large-scale annotation. Recent prototype-based similarity learning approaches enable training-free adaptation by matching query features with class prototypes. However, they suffer from two fundamental limitations: (i) class confusion arising from inter-class similarity margin collapse, and (ii) insufficient visual cues for precise localization, as similarity scores capture only class-level semantic affinity while providing limited spatial information. To address these issues, we introduce two complementary components. Text-Anchored Semantic Mask (TSMa) leverages class-level text features as semantic anchors to identify semantically aligned channels through channel-wise interaction between visual and text features. By suppressing style-induced spurious responses and emphasizing class-intrinsic signals, TSMa enlarges inter-class similarity margins and mitigates class confusion. We further propose Stage-Aligned Hierarchical Autoregressive Regression (SHARe), which reformulates localization as a hierarchical autoregressive process that progressively refines bounding boxes across multiple stages. SHARe leverages the layer-wise characteristics of ViT representations by aligning feature abstraction levels with regression stages: deeper layers guide early coarse localization, while shallower layers rich in edge and texture cues refine spatial details in later stages. Experiments on COCO demonstrate a new state of the art, outperforming the previous best by +10.1 nAP, with extensive analysis validating each component. The code is available at https://github.com/VisualScienceLab-KHU/ReSet.

  • 5 authors
·
Jul 5

ResidualQuant: KV Cache Quantization for Looped Transformers with 2-Bit Residuals

Looped Transformers improve parameter efficiency by repeatedly applying shared Transformer blocks over multiple recurrent loops, increasing computational depth without increasing the parameter count. However, KV cache memory still scales with the number of loops, becoming a key memory bottleneck that limits batch size and inference throughput. KV cache quantization can alleviate this bottleneck, but existing methods often suffer substantial accuracy degradation at aggressive low-precision regimes. We observe that looped Transformers offer a unique opportunity: KV states across loops are highly similar. Based on this observation, we propose ResidualQuant, which uses the final-loop KV states as a reference and represents the remaining loops with low-precision residuals. Our method further combines least-square scaling and rotations applied to the residuals, as well as loop-wise mixed precision, to enable accurate quantization down to INT2 while retaining efficient reconstruction. Across multiple looped Transformer models and mathematical reasoning and code generation benchmarks, ResidualQuant consistently improves the accuracy-memory tradeoff over state-of-the-art rotation-based KV quantization. In particular, our method retains accuracy close to BF16 under mixed-precision settings while reducing theoretical KV storage by 80.7%, achieving up to 13.0% higher accuracy than the rotation-based baseline at the same memory budget. On an RTX 5090, the reduced KV memory traffic improves fixed-batch decode throughput by up to 2.73x, while the smaller memory footprint enables up to 2x larger batches, improving peak throughput by up to 4.15x.

kaist-ai KAIST AI
·
Oct 6 1

ThinkBit: Search Codewords, Recalibrate Scales, Select by Reasoning

Reasoning language models generate thousands of tokens per answer, and generation speed is limited by memory bandwidth, so storing weights in two bits instead of bfloat16 can potentially make inference 8times cheaper. Two-bit methods are usually judged by perplexity and multiple-choice question-answering accuracy, both of which say little about whether a model can still reason through more difficult problems. We present ThinkBit, a strictly scalar two-bit framework built to preserve reasoning, in which every weight is an integer codeword times a bfloat16 scale shared by a group of weights. We first use a sensitivity metric to assign each layer a ternary, 2-bit, or 3-bit tier to allocate bitwidths optimally among layers. This is followed by a layerwise Gumbel-softmax-based scalar quantization algorithm that searches for optimal codewords block by block. Since a layerwise scheme does not capture how quantized layers interact with each other, we recalibrate scales, with the codewords frozen, using a knowledge-distillation-based loss against the teacher model. We then perform a short quantization-aware training (QAT) stage that lets the model mimic the base model's distribution by reassigning codewords. Finally, a paired reasoning test on training problems selects the final checkpoint between the recalibration stage and the QAT stage. On Qwen3-1.7B at matched size, our recalibrated checkpoint scores 46.7 on MATH-500 against 30.0 for EfficientQAT trained on the same data, and 73.0 after QAT on reasoning traces; at 0.52 GB it is smaller than every published 2-bit GGUF of the model yet more accurate on MATH-500. We show that this framework scales and up to 14B, a 3.74 GB model scores 94.8 on MATH-500, against 97.5 for the 29.5 GB bfloat16 model.

microsoft Microsoft
·
Oct 25 3

Dynamic Pyramid Network for Efficient Multimodal Large Language Model

Multimodal large language models (MLLMs) have demonstrated impressive performance in various vision-language (VL) tasks, but their expensive computations still limit the real-world application. To address this issue, recent efforts aim to compress the visual features to save the computational costs of MLLMs. However, direct visual compression methods, e.g. efficient projectors, inevitably destroy the visual semantics in MLLM, especially in difficult samples. To overcome this shortcoming, we propose a novel dynamic pyramid network (DPN) for efficient MLLMs. Specifically, DPN formulates MLLM as a hierarchical structure where visual features are gradually compressed with increasing depth. In this case, even with a high compression ratio, fine-grained visual information can still be perceived in shallow layers. To maximize the benefit of DPN, we further propose an innovative Dynamic Pooling Experts (DPE) that can dynamically choose the optimal visual compression rate according to input features. With this design, harder samples will be assigned larger computations, thus preserving the model performance. To validate our approach, we conduct extensive experiments on two popular MLLMs and ten benchmarks. Experimental results show that DPN can save up to 56% average FLOPs on LLaVA while further achieving +0.74% performance gains. Besides, the generalization ability of DPN is also validated on the existing high-resolution MLLM called LLaVA-HR. Our source codes are anonymously released at https://github.com/aihao2000/DPN-LLaVA.

  • 10 authors
·
Mar 26, 2025

Late Entry in Looped Language Models

Looped language models deepen reasoning at a compact parameter count by iterating a shared layer stack T times per token, turning recurrence depth directly into sequential decoding latency. Conventional early-exit decoding halts after initial passes without cache completion, truncating cached key-value states of past tokens to shallow depth. We study the opposite strategy, late entry, where new tokens skip initial passes and enter directly into the final K < T passes over a deep context cache. Once lightweight fine-tuning resolves hidden-state norm mismatch at the entry boundary, deep cached context substitutes for skipped token-local passes, allowing late entry to outperform matched early exit across model families and pass budgets. To turn this asymmetry into wall-clock speedups without stalling to build deep caches, candidate blocks verify through only the final K passes on the critical path while previously committed tokens complete passes 1 -> T alongside subsequent steps at zero extra serial calls. Projecting these finished T-pass wake states inside the existing output GEMM (Wake verification, governed by logit-margin tolerance tau in [0, inf]) unifies greedy-exact T-pass decoding (tau = 0, matching K = T block decoding within bf16 reduction order), margin-gated verification (tau > 0), and non-rollback lossy late entry (tau = inf) inside a single static CUDA graph. On Ouro-2.6B (T = 4), K = 2 Wake reaches 5.2x greedy-exact speedup at tau = 0 (+26% over K = 4 block decoding on GSM8K) and 6.8x at tau = inf (+16.9 points over trained early exit at matched speed). Scaling test-time recurrence across T in {8, 16, 32, 64} on Huginn-3.5B cuts K = T/4 rollbacks 21.5x with depth, driving greedy-exact (tau = 0) speedups to 6.1x (T = 32) and 8.4x (T = 64, +153% over K = 64 block) and tau = inf speedups to 10.6 to 12.5x.

Simply Stabilizing the Loop via Fully Looped Transformer

Scaling model performance typically requires increasing model size. Looped Transformer offers a compelling alternative by iteratively reusing the same Transformer blocks, trading additional computation for improved performance without increasing parameter count or context length. Because the number of loop iterations can be adjusted at inference, it also provides a natural mechanism for balancing performance and test-time compute. However, Looped Transformer still suffers from training instability when the number of loop iterations increases. Our analysis reveals that this instability stems from two sources: gradient oscillation and residual explosion. To address these two problems, we propose the Fully Looped Transformer, which introduces two parameter-free modifications: (1) Fully Looped Architecture, which distributes inter-loop signals across all layers to mitigate residual explosion; (2) Attention Injection, which reuses the existing attention block to suppress gradient oscillation. These modifications stabilize training dynamics, enabling the Fully Looped Transformer to be trained stably up to 12 loop iterations, whereas other baseline looped models collapse in this regime. In milder settings where Looped Transformer does not collapse, Fully Looped Transformer still improves average downstream-task performance by up to 13.2\%. Overall, our experiments demonstrate that Fully Looped Transformer improves training stability, enhances downstream performance, and provides preliminary adaptability under different test-time compute budgets by varying loop iterations at inference.

  • 7 authors
·
May 24

Looped Diffusion Language Models

Masked diffusion models (MDMs) have emerged as a promising alternative to autoregressive models for language modeling, yet the effective design of transformer architectures for MDMs remains underexplored. In this paper, we show that selectively looping the early-middle transformer layers significantly improves both training efficiency and model performance in MDMs. We call this approach LoopMDM(Looped Masked Diffusion Model), which brings two key benefits: looping layers at training-time yields a depth-scaling effect without adding parameters, while varying the number of loops at inference-time enables flexible compute scaling. Despite the simplicity, the results are striking: across multiple pre-training corpora, LoopMDM matches the performance of same-size MDMs with up to 3.3 fewer training FLOPs, while its final performance outperforms them on various reasoning benchmarks, including up to 8.5 points on GSM8K. It even surpasses deeper non-looped MDMs trained with comparable per-step compute, indicating that selective looping is more effective than naive depth scaling. Furthermore, LoopMDM can scale inference-time compute by increasing the number of loops. Adaptively adjusting the number of loops throughout the sampling process further yields additional gains in compute efficiency while maintaining performance. Lastly, with attention analysis, we provide evidence that looping is effective in MDMs by promoting interactions among masked positions. Our code and weights will be publicly released.

  • 6 authors
·
May 24

Dory1.0-4B: A Looped Normalized-GPT

We introduce Dory1.0-4B, a 4-billion-parameter looped (latent-recurrent) language model with elastic depth: a single checkpoint serves different inference compute budgets. Dory1.0-4B is built on a normalized Transformer (nGPT) backbone with interleaved sliding-window and full-attention layers, organized into an input block, a shared recurrent block, and an output block. At inference, the recurrent block can be applied a variable number of times. We pre-trained Dory1.0-4B on 6 trillion tokens. The first 4.5 trillion tokens were trained in NVFP4, and additional pre-training then extended the context length to 256K tokens. Next, we post-trained the model using Supervised Fine-Tuning (SFT) and Reinforcement Learning with Verifiable Rewards (RLVR), with a difficulty-aware loop curriculum that routes harder prompts to deeper loops. Increasing the loop count improves accuracy, with the largest gains on coding, agentic, and long-context benchmarks. With two or more loops, Dory1.0-4B outperforms larger models such as Qwen3.5-9B, Gemma 4 12B, and Gemma 4 26B-A4B on average across 12 benchmarks. Looping also makes Dory1.0-4B more token-efficient on agentic benchmarks: with four loops, it generates 1.3-2.5x fewer tokens than with one loop, as the extra computation is spent in latent space rather than on longer outputs. To reduce memory during looping, Dory1.0-4B caches keys and values only from the last loop, keeping its KV-cache footprint equal to that of a non-looped model at any loop count while retaining most of the accuracy gains. We open-source the BF16, MXFP8, NVFP4, and GGUF quantized checkpoints.

nvidia NVIDIA
·
Nov 1 2

How to Loop MoE: Flatten the Experts, Untie the Attention

Looped Transformers reuse one block of layers several times: by spending extra computation they push a model of fixed size further, and so use its parameters more fully; while sparse mixture-of-experts (MoE) models activate only a few of many experts for each token. Looped MoE bridges these two design philosophies and gives MoE models new potential for better expert usage, but it raises a question: how to loop a MoE? We answer it with Foil. With the expert parameters and the expert compute per token held fixed, Foil (1) flattens the experts, halving the expert layers, doubling the experts per layer and doubling the passes, so that every routing decision chooses from a larger pool, and (2) unties the attention, giving each pass its own attention parameters while the experts and routers stay shared. Experiments show that Foil clearly outperforms the unflattened looped baseline: at 20B tokens every Foil model has lower pretraining loss than the baseline; at 100B tokens the loss improves monotonically with the degree of flattening, the most flattened Foil ending 0.012 nat below the baseline at equal parameters and compute, with downstream accuracy on par or better; untying the attention also yields more balanced and more confident routing at equal shape. Our ablations analyse why Foil works and turn the findings into design guidance for looped MoE: the returns of looping and of widening the expert layers amplify each other, routing confidence tracks healthy expert use better than load balance, and a sparse looped MoE should therefore use more experts per layer and more passes. Code and configurations are available at https://github.com/SR-A-W/how-to-loop-moe.

  • 9 authors
·
Sep 27 2

EUGens: Efficient, Unified, and General Dense Layers

Efficient neural networks are essential for scaling machine learning models to real-time applications and resource-constrained environments. Fully-connected feedforward layers (FFLs) introduce computation and parameter count bottlenecks within neural network architectures. To address this challenge, in this work, we propose a new class of dense layers that generalize standard fully-connected feedforward layers, Efficient, Unified and General dense layers (EUGens). EUGens leverage random features to approximate standard FFLs and go beyond them by incorporating a direct dependence on the input norms in their computations. The proposed layers unify existing efficient FFL extensions and improve efficiency by reducing inference complexity from quadratic to linear time. They also lead to the first unbiased algorithms approximating FFLs with arbitrary polynomial activation functions. Furthermore, EuGens reduce the parameter count and computational overhead while preserving the expressive power and adaptability of FFLs. We also present a layer-wise knowledge transfer technique that bypasses backpropagation, enabling efficient adaptation of EUGens to pre-trained models. Empirically, we observe that integrating EUGens into Transformers and MLPs yields substantial improvements in inference speed (up to 27\%) and memory efficiency (up to 30\%) across a range of tasks, including image classification, language model pre-training, and 3D scene reconstruction. Overall, our results highlight the potential of EUGens for the scalable deployment of large-scale neural networks in real-world scenarios.

  • 10 authors
·
Oct 13, 2024

Looped Uniform Diffusion Language Models

Uniform diffusion language models (UDLMs) generate text by iteratively denoising sequences of ordinary vocabulary tokens, any of which may be corrupted and subsequently revised. During training, UDLMs must denoise from a context that may itself be unreliable, whereas masked diffusion language models (MDLMs) always condition on a clean context. This challenging training objective makes UDLMs more FLOP-intensive to train than MDLMs, but it yields stronger downstream reasoning performance. Recently, selective looping, which recursively applies a few early Transformer layers within each denoising step, has been shown to improve training efficiency in MDLMs under an iso-FLOP budget. We investigate looping in UDLMs while keeping the training objective and sampler unchanged. We find that looping significantly improves training efficiency: looped UDLMs reach the validation NLL of a non-looped UDLM trained on about 0.5 trillion tokens with up to 2.8x fewer training FLOPs on OpenWebText and 3.3x fewer on FineWeb-Edu. We also find that, at a matched NFE budget, looped UDLMs reach up to 9.8% lower generation perplexity than the non-looped UDLM, with most gains achieved at moderate loop counts. Finally, we study different loop-count distributions and find that sampling smaller loop counts more frequently during training improves inference efficiency: on downstream tasks, this strategy uses 12% fewer loops than uniform loop-count sampling without degrading accuracy.

  • 4 authors
·
Oct 20 1

Fast and Stable Triangular Inversion for Delta-Rule Linear Transformers

Linear attention has emerged as a cornerstone for efficient long-context architectures, as evidenced by its integration into state-of-the-art open-source models including Qwen3.5/3.6, Kimi Linear, and RWKV-7. Models that incorporate linear attention layers with the so-called Delta-Rule involve the inversion of triangular matrices as a core sub-routine. This operation often forms a performance bottleneck, and, due to its high-sensitivity to numerical errors, it can significantly deteriorate end-to-end model accuracy if it is not carefully implemented. This work provides a systematic analysis of both direct and iterative triangular inversion algorithms, targeting methods that are rich in matrix products, and, therefore, have the potential to efficiently utilize modern hardware. To that end, our analysis covers a broad spectrum of mathematical and practical aspects, with a heavy focus on numerical stability, computational complexity, and, ultimately, hardware efficiency and practical considerations. We provide a rigorous experimental evaluation to verify these properties in practical scenarios, and in low-precision floating-point representations, highlighting the strengths and limitations of each method. Performance benchmarks on NPUs reveal up to 4.3times speed-up against the state-of-the-art implementations of SGLang for triangular matrix inversion, leading to significant performance improvements on the entire layer level, while maintaining full end-to-end model accuracy.

  • 7 authors
·
May 19

Investigating the Benefits of Projection Head for Representation Learning

An effective technique for obtaining high-quality representations is adding a projection head on top of the encoder during training, then discarding it and using the pre-projection representations. Despite its proven practical effectiveness, the reason behind the success of this technique is poorly understood. The pre-projection representations are not directly optimized by the loss function, raising the question: what makes them better? In this work, we provide a rigorous theoretical answer to this question. We start by examining linear models trained with self-supervised contrastive loss. We reveal that the implicit bias of training algorithms leads to layer-wise progressive feature weighting, where features become increasingly unequal as we go deeper into the layers. Consequently, lower layers tend to have more normalized and less specialized representations. We theoretically characterize scenarios where such representations are more beneficial, highlighting the intricate interplay between data augmentation and input features. Additionally, we demonstrate that introducing non-linearity into the network allows lower layers to learn features that are completely absent in higher layers. Finally, we show how this mechanism improves the robustness in supervised contrastive learning and supervised learning. We empirically validate our results through various experiments on CIFAR-10/100, UrbanCars and shifted versions of ImageNet. We also introduce a potential alternative to projection head, which offers a more interpretable and controllable design.

  • 5 authors
·
Mar 17, 2024

Recurrent Self-Improvement: Dynamic Cross-Loop On-Policy Distillation for Looped Language Models

Looped Language Models (LoopLMs) offer a parameter efficient approach to scaling reasoning by reusing shared parameters across recurrent computation steps. Despite their promise, effective post-training of LoopLMs remains challenging. Existing approaches either provide reward based supervision that is sparse or costly to extend across loops, or rely on external teachers or privileged information, leading to limited teacher availability or teacher-student context mismatch. To address these limitations, we introduce LoopOPD, a cross-loop on-policy distillation framework that uses additional recurrent computation within a LoopLM as its own source of supervision. LoopOPD uses a frozen terminal loop policy as a compute privileged teacher for an intermediate loop student on student generated rollouts, providing dense supervision without an external teacher or privileged information. We further propose Dynamic LoopOPD (D-LoopOPD), which continually refreshes the terminal loop teacher as the shared model parameters are updated, enabling recurrent self-improvement. We characterize how distillation updates propagate across loop depths and derive sufficient conditions under which a single update yields simultaneous local improvement at both loop depths. Experiments on Ouro-Thinking models show that LoopOPD improves mathematical reasoning, while D-LoopOPD yields further gains through dynamic teacher updates. Despite being trained only on mathematical data, the resulting models also improve on general reasoning and code generation benchmarks, demonstrating that recurrent computation can serve as an effective source of supervision for LoopLMs. Our code and model checkpoints will be released upon acceptance.

  • 5 authors
·
Oct 6

MaskNet: Introducing Feature-Wise Multiplication to CTR Ranking Models by Instance-Guided Mask

Click-Through Rate(CTR) estimation has become one of the most fundamental tasks in many real-world applications and it's important for ranking models to effectively capture complex high-order features. Shallow feed-forward network is widely used in many state-of-the-art DNN models such as FNN, DeepFM and xDeepFM to implicitly capture high-order feature interactions. However, some research has proved that addictive feature interaction, particular feed-forward neural networks, is inefficient in capturing common feature interaction. To resolve this problem, we introduce specific multiplicative operation into DNN ranking system by proposing instance-guided mask which performs element-wise product both on the feature embedding and feed-forward layers guided by input instance. We also turn the feed-forward layer in DNN model into a mixture of addictive and multiplicative feature interactions by proposing MaskBlock in this paper. MaskBlock combines the layer normalization, instance-guided mask, and feed-forward layer and it is a basic building block to be used to design new ranking model under various configurations. The model consisting of MaskBlock is called MaskNet in this paper and two new MaskNet models are proposed to show the effectiveness of MaskBlock as basic building block for composing high performance ranking systems. The experiment results on three real-world datasets demonstrate that our proposed MaskNet models outperform state-of-the-art models such as DeepFM and xDeepFM significantly, which implies MaskBlock is an effective basic building unit for composing new high performance ranking systems.

  • 3 authors
·
Feb 9, 2021

LoopFormer: Elastic-Depth Looped Transformers for Latent Reasoning via Shortcut Modulation

Looped Transformers have emerged as an efficient and powerful class of models for reasoning in the language domain. Recent studies show that these models achieve strong performance on algorithmic and reasoning tasks, suggesting that looped architectures possess an inductive bias toward latent reasoning. However, prior approaches fix the number of loop iterations during training and inference, leaving open the question of whether these models can flexibly adapt their computational depth under variable compute budgets. We introduce LoopFormer, a looped Transformer trained on variable-length trajectories to enable budget-conditioned reasoning. Our core contribution is a shortcut-consistency training scheme that aligns trajectories of different lengths, ensuring that shorter loops yield informative representations while longer loops continue to refine them. LoopFormer conditions each loop on the current time and step size, enabling representations to evolve consistently across trajectories of varying length rather than drifting or stagnating. Empirically, LoopFormer demonstrates robust performance on language modeling and reasoning benchmarks even under aggressive compute constraints, while scaling gracefully with additional budget. These results show that looped Transformers are inherently suited for adaptive language modeling, opening a path toward controllable and budget-aware large language models.

Towards Efficient Fine-tuning of Pre-trained Code Models: An Experimental Study and Beyond

Recently, fine-tuning pre-trained code models such as CodeBERT on downstream tasks has achieved great success in many software testing and analysis tasks. While effective and prevalent, fine-tuning the pre-trained parameters incurs a large computational cost. In this paper, we conduct an extensive experimental study to explore what happens to layer-wise pre-trained representations and their encoded code knowledge during fine-tuning. We then propose efficient alternatives to fine-tune the large pre-trained code model based on the above findings. Our experimental study shows that (1) lexical, syntactic and structural properties of source code are encoded in the lower, intermediate, and higher layers, respectively, while the semantic property spans across the entire model. (2) The process of fine-tuning preserves most of the code properties. Specifically, the basic code properties captured by lower and intermediate layers are still preserved during fine-tuning. Furthermore, we find that only the representations of the top two layers change most during fine-tuning for various downstream tasks. (3) Based on the above findings, we propose Telly to efficiently fine-tune pre-trained code models via layer freezing. The extensive experimental results on five various downstream tasks demonstrate that training parameters and the corresponding time cost are greatly reduced, while performances are similar or better. Replication package including source code, datasets, and online Appendix is available at: https://github.com/DeepSoftwareAnalytics/Telly.

  • 7 authors
·
Apr 11, 2023

Sparse Growing Transformer: Training-Time Sparse Depth Allocation via Progressive Attention Looping

Existing approaches to increasing the effective depth of Transformers predominantly rely on parameter reuse, extending computation through recursive execution. Under this paradigm, the network structure remains static along the training timeline, and additional computational depth is uniformly assigned to entire blocks at the parameter level. This rigidity across training time and parameter space leads to substantial computational redundancy during training. In contrast, we argue that depth allocation during training should not be a static preset, but rather a progressively growing structural process. Our systematic analysis reveals a deep-to-shallow maturation trajectory across layers, where high-entropy attention heads play a crucial role in semantic integration. Motivated by this observation, we introduce the Sparse Growing Transformer (SGT). SGT is a training-time sparse depth allocation framework that progressively extends recurrence from deeper to shallower layers via targeted attention looping on informative heads. This mechanism induces structural sparsity by selectively increasing depth only for a small subset of parameters as training evolves. Extensive experiments across multiple parameter scales demonstrate that SGT consistently outperforms training-time static block-level looping baselines under comparable settings, while reducing the additional training FLOPs overhead from approximately 16--20% to only 1--3% relative to a standard Transformer backbone.

  • 12 authors
·
Apr 15

Library of Layers (LoL): Adaptively Ordering Transformer Layers at Runtime

Computer programmers chain together the same reusable computational primitives, for example, conditional statements or loops, but in different orders to implement different algorithms. In contrast, existing language model architectures always execute their layers in the same order. We introduce Library of Layers (LoL), an architecture that dynamically orders its layers during inference to solve the problem at hand. LoL has a single hyperparameter, the size of its global library of transformer blocks, that allows it to transition seamlessly between parameter reuse and sparsity, generalizing the parameter-efficiency and FLOPs-efficiency tradeoffs of dense, depth-recurrent, and mixture of experts architectures in one unified family. We show that LoL achieves competitive performance with all three above baselines when pretrained on text data. On synthetic sudoku and maze data, we observe that the model employs distinct layer orderings to implement different solution strategies, and we can intervene on routing to force a model to apply a specific solution strategy to a problem instance. In a multilingual natural language setting, we find that LoL chooses different layer order patterns based on language and script. Similarly, we train LoL on safety data and fit probes to its router outputs, finding that these probes distinguish safe from unsafe text with high AUROC. LoL provides a path toward a future in which models dynamically compose their own computational graph, enabling more efficient and controllable reasoning.

  • 6 authors
·
Nov 2 1

DepthGraft: Structural Regularization through Hierarchical Cross-Layer KV Reconstruction

Scaling depth is a key route to stronger large language models, but Pre-LN architectures often suffer from depth-wise information dilution, limiting the effective use of deep layers. While cross-layer connectivity has proven effective at mitigating this problem, existing designs usually introduce additional computation or memory access. We revisit cross-layer KV sharing as an efficient form of such connectivity. Beyond cache compression, each KV reuse edge creates a direct gradient path from deep layers to source KV projections, turning KV sharing into an implicit structural regularizer for KV representation geometry. We provide a systematic analysis of this mechanism, showing that proper sharing topologies sharpen key retrieval directions while enriching the value content subspace, whereas existing adjacent or global-anchor designs do not fully exploit this effect. Motivated by this, we propose DepthGraft, a hierarchical KV-sharing architecture that reconstructs deep-layer KV from stride-aligned shallow-middle source pairs. DepthGraft distributes non-local gradient flow across source layers, while preserving prefill early completion and reducing KV cache by roughly one third. Experiments on dense and MoE models from 0.5B to 16B parameters show consistent downstream improvements under both GQA and MLA. Notably, on the 16B MoE model, DepthGraft achieves a 7.0% absolute improvement on MMLU-Pro, along with gains of 6.6% on CMMLU and 6.4% on C3. These results validate the potential of DepthGraft as a scalable design for large-scale pretraining. The project page is available at https://github.com/jianke0604/DepthGraft.

LatentLoop: Scaling Looped MoE Models with Asymmetric Compute Allocation

Looped Mixture-of-Experts (MoE) models combine parameter reuse with sparse computation to improve performance under matched budgets. Prior work demonstrates that different loop visits can play different roles even when they share parameters. To probe the contributions of different loop visits, we learn separate residual coefficients in a model that applies a shared block twice, observing a smaller scale in the first visit. Fixed coefficient experiments show that reducing the first visit's scale preserves or improves performance, whereas the same reductions to the second hurt it. This asymmetry motivates us to explore asymmetric compute allocation. We propose LatentLoop, which compresses the first visit's sequence, retains full resolution in the second, and reallocates saved computation to increase the hidden size. We further learn how strongly the first visit updates the full sequence, and share MoE weights across visits while using separate attention parameters to accommodate their different sequence resolutions. Across 15 configurations spanning 1.3B--7B parameters, with the largest budget exceeding 10^{21} FLOPs, LatentLoop consistently lowers validation NLL. At a fitted NLL of 1.988, predicted compute savings are 19.0\% and 7.9\% relative to vanilla MoE and the looped baseline. It also improves average scores on nine benchmarks at all sizes in 0-shot and 5-shot settings. These results suggest asymmetric compute allocation is a promising direction for looped MoE models.

  • 8 authors
·
Oct 13 4

Void in Language Models

Despite advances in transformer-based language models (LMs), a fundamental question remains largely unanswered: Are all layers activated during inference? We investigate this question by detecting unactivated layers (which we refer to as Voids) using a non-trainable and parameter-free adaptive computation method called L2 Adaptive Computation (LAC). We adapt LAC from its original efficiency-focused application to trace activated layers during inference. This method monitors changes in the L2-norm of activations to identify voids. We analyze layer activation in instruction-tuned LMs across two phases: Prompt Processing (PP), where we trace activated layers for each token in the input prompts, and Response Generation (RG), where we trace activated layers for each generated token. We further demonstrate that distinct layers are activated during these two phases. To show the effectiveness of our method, we evaluated three distinct instruction-tuned LMs from the Llama, Mistral, and Qwen families on three benchmarks: MMLU, GPQA Diamond, and BoolQ. For example, on MMLU with a zero-shot setting, skipping voids in Qwen2.5-7B-Instruct resulted in an improvement from 69.24 to 71.29 while the model uses only 30% of the layers. Similarly, Mistral-7B-Instruct-v0.3 on GPQA Diamond improved from 13.88 to 18.36 when using 70% of the layers during both the PP and RG phases. These results show that not all layers contribute equally during inference, and that selectively skipping most of them can improve the performance of models on certain tasks.

  • 1 authors
·
May 20, 2025 2

StEik: Stabilizing the Optimization of Neural Signed Distance Functions and Finer Shape Representation

We present new insights and a novel paradigm (StEik) for learning implicit neural representations (INR) of shapes. In particular, we shed light on the popular eikonal loss used for imposing a signed distance function constraint in INR. We show analytically that as the representation power of the network increases, the optimization approaches a partial differential equation (PDE) in the continuum limit that is unstable. We show that this instability can manifest in existing network optimization, leading to irregularities in the reconstructed surface and/or convergence to sub-optimal local minima, and thus fails to capture fine geometric and topological structure. We show analytically how other terms added to the loss, currently used in the literature for other purposes, can actually eliminate these instabilities. However, such terms can over-regularize the surface, preventing the representation of fine shape detail. Based on a similar PDE theory for the continuum limit, we introduce a new regularization term that still counteracts the eikonal instability but without over-regularizing. Furthermore, since stability is now guaranteed in the continuum limit, this stabilization also allows for considering new network structures that are able to represent finer shape detail. We introduce such a structure based on quadratic layers. Experiments on multiple benchmark data sets show that our new regularization and network are able to capture more precise shape details and more accurate topology than existing state-of-the-art.

  • 4 authors
·
Nov 10, 2023

CART: Context-Anchored Recurrent Transformer -- A Parameter-Efficient Architecture with Learned Stability

We present CART (Context-Anchored Recurrent Transformer), a parameter-efficient language model that reuses a single shared core block R times across depth. Unlike prior looped transformers that recompute key-value tensors at every iteration, CART computes K and V once from a multi-layer prelude and has the recurrent core cross-attend to those frozen tensors via multi-head latent attention. A learned Linear Time-Invariant (LTI) gate keeps the recurrence stable: its spectral radius settles in a narrow band (rho in [0.79, 0.83]) across all 36 fully-trained configurations. We evaluate CART on single consumer GPUs in two stages: a 64-configuration screen at 3,000 steps, then 36 configurations (P=6, R in {6,8,10}, three seeds) trained for 30,500 steps (~1B tokens). Two patterns hold across widths d in {256,512,768,1024}: prelude depth P dominates loop count R, and the Stage-1 ranking of R reverses at full training (R=6 becomes best at d>=512). At the binding d=1024 parameter-parity test, CART does not beat a parameter-matched dense baseline, losing by 1-2% at stored-parameter parity and by ~10% at effective-parameter parity. Diagnostic ablations split the effective-parameter gap into ~5% from weight sharing and a residual ~5% from the heterogeneous prelude/anchor/core/coda framing; the recurrent-core machinery (hyper-connections, LTI gate, loop-index embedding) is individually vestigial. Variable-R inference degrades on both sides of the trained R, a negative result for test-time depth scaling under this recipe.

  • 1 authors
·
Jun 2 1

HyLRA: Hybrid Layer Reuse Attention for Efficient Long-Context Inference

Long-context inference in Large Language Models (LLMs) is bottlenecked by the quadratic computation complexity of attention and the substantial memory footprint of Key-Value (KV) caches. While existing sparse attention mechanisms attempt to mitigate this by exploiting inherent sparsity, they often rely on rigid patterns or aggressive pruning, failing to achieve an optimal balance between efficiency and accuracy. In this paper, we introduce {\bf HyLRA} ({\bf Hy}brid {\bf L}ayer {\bf R}euse {\bf A}ttention), a novel framework driven by layer-wise sparsity profiling. Our empirical analysis uncovers a dual characteristic in attention mechanics: intra-layer sensitivity, where specific layers necessitate full attention to prevent feature distortion, and inter-layer similarity, where consecutive layers share substantial critical tokens. Based on these observations, HyLRA employs an offline dynamic programming approach to derive an optimal layer-wise policy. This hybrid strategy retains full attention for sensitive layers to ensure robustness, while enabling tolerant layers to bypass quadratic calculations by directly reusing top-k indices from preceding layers. This approach allows LLMs to restrict computation to the most critical tokens, effectively overcoming the quadratic bottleneck of dense attention. Extensive evaluations demonstrate that HyLRA improves inference throughput by 6\%--46\% while maintaining comparable performance (with <1% accuracy degradation), consistently outperforming state-of-the-art sparse attention methods. HyLRA is open source at https://anonymous.4open.science/r/unified-cache-management-CF80/{/r/unified-cache-management-CF80/}

  • 7 authors
·
Jan 31

FoveaBox: Beyond Anchor-based Object Detector

We present FoveaBox, an accurate, flexible, and completely anchor-free framework for object detection. While almost all state-of-the-art object detectors utilize predefined anchors to enumerate possible locations, scales and aspect ratios for the search of the objects, their performance and generalization ability are also limited to the design of anchors. Instead, FoveaBox directly learns the object existing possibility and the bounding box coordinates without anchor reference. This is achieved by: (a) predicting category-sensitive semantic maps for the object existing possibility, and (b) producing category-agnostic bounding box for each position that potentially contains an object. The scales of target boxes are naturally associated with feature pyramid representations. In FoveaBox, an instance is assigned to adjacent feature levels to make the model more accurate.We demonstrate its effectiveness on standard benchmarks and report extensive experimental analysis. Without bells and whistles, FoveaBox achieves state-of-the-art single model performance on the standard COCO and Pascal VOC object detection benchmark. More importantly, FoveaBox avoids all computation and hyper-parameters related to anchor boxes, which are often sensitive to the final detection performance. We believe the simple and effective approach will serve as a solid baseline and help ease future research for object detection. The code has been made publicly available at https://github.com/taokong/FoveaBox .

  • 6 authors
·
Jul 15, 2020

When Does Sparsity Mitigate the Curse of Depth in LLMs

Recent work has demonstrated the curse of depth in large language models (LLMs), where later layers contribute less to learning and representation than earlier layers. Such under-utilization is linked to the accumulated growth of variance in Pre-Layer Normalization, which can push deep blocks toward near-identity behavior. In this paper, we demonstrate that, sparsity, beyond enabling efficiency, acts as a regulator of variance propagation and thereby improves depth utilization. Our investigation covers two sources of sparsity: (i) implicit sparsity, which emerges from training and data conditions, including weight sparsity induced by weight decay and attention sparsity induced by long context inputs; and (ii) explicit sparsity, which is enforced by architectural design, including key/value-sharing sparsity in Grouped-Query Attention and expert-activation sparsity in Mixtureof-Experts. Our claim is thoroughly supported by controlled depth-scaling experiments and targeted layer effectiveness interventions. Across settings, we observe a consistent relationship: sparsity improves layer utilization by reducing output variance and promoting functional differentiation. We eventually distill our findings into a practical rule-of-thumb recipe for training deptheffective LLMs, yielding a notable 4.6% accuracy improvement on downstream tasks. Our results reveal sparsity, arising naturally from standard design choices, as a key yet previously overlooked mechanism for effective depth scaling in LLMs. Code is available at https://github.com/pUmpKin-Co/SparsityAndCoD.

HAWQ-V2: Hessian Aware trace-Weighted Quantization of Neural Networks

Quantization is an effective method for reducing memory footprint and inference time of Neural Networks, e.g., for efficient inference in the cloud, especially at the edge. However, ultra low precision quantization could lead to significant degradation in model generalization. A promising method to address this is to perform mixed-precision quantization, where more sensitive layers are kept at higher precision. However, the search space for a mixed-precision quantization is exponential in the number of layers. Recent work has proposed HAWQ, a novel Hessian based framework, with the aim of reducing this exponential search space by using second-order information. While promising, this prior work has three major limitations: (i) HAWQV1 only uses the top Hessian eigenvalue as a measure of sensitivity and do not consider the rest of the Hessian spectrum; (ii) HAWQV1 approach only provides relative sensitivity of different layers and therefore requires a manual selection of the mixed-precision setting; and (iii) HAWQV1 does not consider mixed-precision activation quantization. Here, we present HAWQV2 which addresses these shortcomings. For (i), we perform a theoretical analysis showing that a better sensitivity metric is to compute the average of all of the Hessian eigenvalues. For (ii), we develop a Pareto frontier based method for selecting the exact bit precision of different layers without any manual selection. For (iii), we extend the Hessian analysis to mixed-precision activation quantization. We have found this to be very beneficial for object detection. We show that HAWQV2 achieves new state-of-the-art results for a wide range of tasks.

  • 7 authors
·
Nov 9, 2019

Hyperloop Transformers

LLM architecture research generally aims to maximize model quality subject to fixed compute/latency budgets. However, many applications of interest such as edge and on-device deployment are further constrained by the model's memory footprint, thus motivating parameter-efficient architectures for language modeling. This paper describes a simple architecture that improves the parameter-efficiency of LLMs. Our architecture makes use of looped Transformers as a core primitive, which reuse Transformer layers across depth and are thus more parameter-efficient than ordinary (depth-matched) Transformers. We organize the looped Transformer into three blocks--begin, middle, and end blocks--where each block itself consists of multiple Transformer layers, and only the middle block is applied recurrently across depth. We augment the looped middle block with hyper-connections (Xie et al., 2026), which expand the residual stream into matrix-valued residual streams. Hyper-connections are applied only after each loop, and therefore add minimal new parameters and compute cost. Across various model scales, we find that our Hyper-Connected Looped Transformer (Hyperloop Transformer) is able to outperform depth-matched Transformer and mHC Transformer baselines despite using approximately 50% fewer parameters. The outperformance persists through post-training weight quantization, thus positioning Hyperloop Transformers as an attractive architecture for memory-efficient language modeling.

  • 3 authors
·
Apr 24

Exploring Concept Depth: How Large Language Models Acquire Knowledge at Different Layers?

Large language models (LLMs) have shown remarkable performances across a wide range of tasks. However, the mechanisms by which these models encode tasks of varying complexities remain poorly understood. In this paper, we explore the hypothesis that LLMs process concepts of varying complexities in different layers, introducing the idea of "Concept Depth" to suggest that more complex concepts are typically acquired in deeper layers. Specifically, we categorize concepts based on their level of abstraction, defining them in the order of increasing complexity within factual, emotional, and inferential tasks. We conduct extensive probing experiments using layer-wise representations across various LLM families (Gemma, LLaMA, QWen) on various datasets spanning the three domains of tasks. Our findings reveal that models could efficiently conduct probing for simpler tasks in shallow layers, and more complex tasks typically necessitate deeper layers for accurate understanding. Additionally, we examine how external factors, such as adding noise to the input and quantizing the model weights, might affect layer-wise representations. Our findings suggest that these factors can impede the development of a conceptual understanding of LLMs until deeper layers are explored. We hope that our proposed concept and experimental insights will enhance the understanding of the mechanisms underlying LLMs. Our codes are available at https://github.com/Luckfort/CD.

  • 13 authors
·
Apr 10, 2024