Daily Papers

Rendering document text as images allows vision-language models to encode documents as visual tokens, which can reduce input sequence length compared with text input. This reduction in input length is particularly useful for reranking, where each query involves scoring multiple candidate documents and token savings apply to each candidate evaluation. We introduce RenderRank, a reranker that learns query-dependent relevance scoring from compressed visual document representations instead of the text token sequences used by conventional text-based rerankers. Training first aligns relevance scores from visual inputs with those of a text-based teacher, then refines the relative scores of positive and negative documents for the same query. Across 11 datasets from BEIR, RenderRank uses 16.5-35.5% fewer input tokens while achieving an average NDCG@10 of 55.96, outperforming all evaluated text-based baselines below 4B parameters and some larger models. Across four long-document datasets, it achieves an average NDCG@10 of 88.27 with approximately half the average input token count of the evaluated text-based rerankers. In this setting, RenderRank delivers 1.70x the highest average throughput of the evaluated baselines. These results demonstrate that compressed visual representations can support accurate document relevance scoring, providing an alternative to text token representations for reranking.

RL-based post-training has been widely adopted to enable interleaved visual and textual reasoning in unified multimodal models capable of both text and image generation. However, most existing approaches are built upon autoregressive (AR) unified models, which require full image regeneration during visual reasoning. In this work, we demonstrate that multimodal discrete diffusion models are effective alternatives to AR models for reinforcement learning in interleaved reasoning, owing to their ability to perform efficient visual rollouts via localized visual editing rather than full image-token regeneration. This reduces rollout computation during GRPO by 26.9\% compared to AR baselines, with minimal performance drop. Despite the improved efficiency, we find that joint reward assignment, which employs a shared reward signal across modalities, introduces cross-modal interference between unrelated image and text token sequences during RL updates. To address this issue, we propose factorized reward assignment, a strategy that assigns rewards independently to text and vision segments. With factorized reward assignment, our RL approach achieves an 11.2% improvement over joint reward assignment and a 38.04% improvement over the base model.

This paper presents methods for building speech recognizers tailored for Japanese speaking assessment tasks. Specifically, we build a speech recognizer that outputs phonemic labels with accent markers. Although Japanese is resource-rich, there is only a small amount of data for training models to produce accurate phonemic transcriptions that include accent marks. We propose two methods to mitigate data sparsity. First, a multitask training scheme introduces auxiliary loss functions to estimate orthographic text labels and pitch patterns of the input signal, so that utterances with only orthographic annotations can be leveraged in training. The second fuses two estimators, one over phonetic alphabet strings, and the other over text token sequences. To combine these estimates we develop an algorithm based on the finite-state transducer framework. Our results indicate that the use of multitask learning and fusion is effective for building an accurate phonemic recognizer. We show that this approach is advantageous compared to the use of generic multilingual recognizers. The relative advantages of the proposed methods were also compared. Our proposed methods reduced the average of mora-label error rates from 12.3% to 7.1% over the CSJ core evaluation sets.

Vision Language Models (VLMs) offer the exciting possibility of processing text as rendered images, bypassing the need for tokenizing the text into long token sequences. Since VLM image encoders map fixed-size images to a fixed number of visual tokens, varying rendering resolution provides a fine-grained compression knob. However, accuracy deteriorates quickly as compression increases: characters shrink below the vision encoder's effective resolution, making them indistinguishable. To address this, we propose LensVLM, an inference framework and post-training recipe that enables VLMs to scan compressed images, then selectively expand only the relevant images to their uncompressed form via learned tools. Building on Qwen3.5-9B-Base, LensVLM maintains accuracy comparable to the full-text upper bound at 4.3x effective compression and outperforms retrieval-based, text- and visual-compression baselines up to 10.1x effective compression across seven text QA benchmarks. LensVLM also generalizes to multimodal document and code understanding tasks, with the accuracy gain over baselines growing as compression increases. Our analysis validates this approach: training makes visual compression robust to rendering choices, and as compression grows the model increasingly relies on expanded content rather than unreliable visual reading. The analysis also yields practical tool-choice guidance: text expansion is preferable for rendered text, while high-resolution image expansion suits native documents whose layout cues carry task-relevant information.

Language models (LMs) are pre-trained on raw text datasets to generate text sequences token-by-token. While this approach facilitates the learning of world knowledge and reasoning, it does not explicitly optimize for linguistic competence. To bridge this gap, we propose L2T, a pre-training framework integrating Language Learning Tasks alongside standard next-token prediction. Inspired by human language acquisition, L2T transforms raw text into structured input-output pairs to provide explicit linguistic stimulation. Pre-training LMs on a mixture of raw text and L2T data not only improves overall performance on linguistic competence benchmarks but accelerates its acquisition, while maintaining competitive performance on general reasoning tasks.

Large language model (LLM) tokenizers act as structured compressors: by mapping text to discrete token sequences, they determine token count (and thus compute and context usage) and the statistical structure seen by downstream models. Despite their central role in LLM pipelines, the link between tokenization, compression efficiency and induced structure is not well understood. We empirically demonstrate that tokenizer training scale redistributes entropy: as training data grows, the token stream becomes more diverse in aggregate (higher unigram entropy) yet markedly more predictable in-context (lower higher-order conditional entropies), indicating that tokenization absorbs substantial short-range regularity although these gains degrade under train-test domain mismatch. To ground these observations, we first benchmark i) pretrained GPT-family tokenizers as black-box compressors across various domains, and ii) learned tokenizers across configurations spanning vocabulary size, training scale, and domain. Next, we study tokenization as a transform for universal compression and introduce a compression-aware BPE variant. Finally, we adopt a channel lens and introduce capacity-utilization metrics to analyze tokenizer behaviour and outline implications for downstream modeling. Put together, our results expose various trade-offs between compression, induced structure, and robustness under domain shift, and motivate principled, compression-aware tokenizer design.

This paper introduces ARM, a discrete representation-based AutoRegressive Model that unifies image understanding, generation, and editing within a next-token prediction framework. ARM is built on three efforts: first, we train a discrete semantic visual tokenizer that maps images into compact token sequences. Our tokenizer is supervised with multiple objectives that jointly promote semantic discriminability, language alignment and faithful reconstruction, thereby supporting diverse tasks in a shared latent space. With this, we train a 7B autoregressive model over large-scale text and image token sequences, seamlessly developing vision-language perception and generation capabilities. Finally, to further improve preference-aligned behavior for text-to-image generation and instruction-guided editing, ARM applies reinforcement learning (RL) to optimize task-level objectives such as visual quality, instruction adherence, and edit consistency. Surprisingly, the results show that RL not only substantially improves performance on the target tasks (e.g., raising WISE overall from 0.50 to 0.56, GEdit-Bench-EN G_O from 5.75 to 6.68), but also induces cross-task synergy between text-to-image generation and editing. Collectively, these findings highlight autoregressive modeling, when paired with strong representations and preference optimization, as a scalable foundation for multimodal intelligence. Code: https://github.com/wdrink/ARM.

Image tokenization has enabled major advances in autoregressive image generation by providing compressed, discrete representations that are more efficient to process than raw pixels. While traditional approaches use 2D grid tokenization, recent methods like TiTok have shown that 1D tokenization can achieve high generation quality by eliminating grid redundancies. However, these methods typically use a fixed number of tokens and thus cannot adapt to an image's inherent complexity. We introduce FlexTok, a tokenizer that projects 2D images into variable-length, ordered 1D token sequences. For example, a 256x256 image can be resampled into anywhere from 1 to 256 discrete tokens, hierarchically and semantically compressing its information. By training a rectified flow model as the decoder and using nested dropout, FlexTok produces plausible reconstructions regardless of the chosen token sequence length. We evaluate our approach in an autoregressive generation setting using a simple GPT-style Transformer. On ImageNet, this approach achieves an FID<2 across 8 to 128 tokens, outperforming TiTok and matching state-of-the-art methods with far fewer tokens. We further extend the model to support to text-conditioned image generation and examine how FlexTok relates to traditional 2D tokenization. A key finding is that FlexTok enables next-token prediction to describe images in a coarse-to-fine "visual vocabulary", and that the number of tokens to generate depends on the complexity of the generation task.

In modern generative models, images are specified and controlled through text prompts. In practice, images are generated from sequences of tokens derived from these prompts. However, the space of token sequences lacks a consistent accessible structure: semantically similar images may correspond to sequences that differ in wording, ordering, and placement of concepts, while similar token sequences may encode very different semantics. This apparent lack of structure makes it difficult to perform smooth transitions in this space, hindering applications such as image blending and continuous control of edits. We argue that this limitation stems not from the absence of semantic structure, but from misalignment between representations. To address this misalignment, we introduce Token-to-Token alignment, a framework that establishes explicit semantic correspondence between tokens across prompts. Our approach transforms prompts into a structured representation in which semantically corresponding concepts are mapped to consistent positions across prompts, and then aligns their token embeddings based on semantic similarity. Concretely, the method consists of two stages: a structural alignment that rephrases prompts into a shared structured form, followed by an embedding-level alignment that matches token representations across prompts. With this alignment in place, simple linear interpolation becomes a meaningful operation, producing smooth and coherent semantic transitions and enabling applications such as blending and continuous editing. Our results show that text embedding spaces in text-to-image models implicitly encode a continuous semantic structure that becomes accessible once representations are properly aligned, suggesting that semantic control can be achieved by organizing existing representations rather than modifying the generative model.

Recently, large-scale pre-training methods like CLIP have made great progress in multi-modal research such as text-video retrieval. In CLIP, transformers are vital for modeling complex multi-modal relations. However, in the vision transformer of CLIP, the essential visual tokenization process, which produces discrete visual token sequences, generates many homogeneous tokens due to the redundancy nature of consecutive and similar frames in videos. This significantly increases computation costs and hinders the deployment of video retrieval models in web applications. In this paper, to reduce the number of redundant video tokens, we design a multi-segment token clustering algorithm to find the most representative tokens and drop the non-essential ones. As the frame redundancy occurs mostly in consecutive frames, we divide videos into multiple segments and conduct segment-level clustering. Center tokens from each segment are later concatenated into a new sequence, while their original spatial-temporal relations are well maintained. We instantiate two clustering algorithms to efficiently find deterministic medoids and iteratively partition groups in high dimensional space. Through this token clustering and center selection procedure, we successfully reduce computation costs by removing redundant visual tokens. This method further enhances segment-level semantic alignment between video and text representations, enforcing the spatio-temporal interactions of tokens from within-segment frames. Our method, coined as CenterCLIP, surpasses existing state-of-the-art by a large margin on typical text-video benchmarks, while reducing the training memory cost by 35\% and accelerating the inference speed by 14\% at the best case. The code is available at {https://github.com/mzhaoshuai/CenterCLIP}{{https://github.com/mzhaoshuai/CenterCLIP}}.

Large language models (LLMs) have achieved remarkable progress across diverse tasks, yet their internal mechanisms remain largely opaque. In this work, we address a fundamental question: to what extent can the original input text be recovered from a single last-token representation within an LLM? We propose Rep2Text, a novel framework for decoding full text from last-token representations. Rep2Text employs a trainable adapter that projects a target model's internal representations into the embedding space of a decoding language model, which then autoregressively reconstructs the input text. Experiments on various model combinations (Llama-3.1-8B, Gemma-7B, Mistral-7B-v0.1, Llama-3.2-3B) demonstrate that, on average, over half of the information in 16-token sequences can be recovered from this compressed representation while maintaining strong semantic integrity and coherence. Furthermore, our analysis reveals an information bottleneck effect: longer sequences exhibit decreased token-level recovery while preserving strong semantic integrity. Besides, our framework also demonstrates robust generalization to out-of-distribution medical data.

Diffusion language models generate tokens in parallel, but still require multiple sampling steps to produce high-quality text. In this paper, we investigate whether a model can learn to generate an entire sequence in a single forward pass. We propose Seq-Drifting, a framework that applies drifting to sequences of continuous token representations and directly learns a map from Gaussian noise to text. Unlike existing DLMs that derive the supervision at each position directly from the observed token in a training sequence, Seq-Drifting builds a drift field whose position-wise targets adapt to the current generated context. At each position, attraction guides each output toward a set of contextually plausible token representations, while repulsion discourages collapse across samples and repetition within sequences. The generator learns from this drift field during training and produces all tokens jointly in one pass at inference. Empirically, Seq-Drifting achieves a generative perplexity of 36.01 on LM1B in one step and performs competitively in both unconditional and conditional generation. Experiments on translation, summarization, and reasoning further demonstrate the applicability of the framework beyond open-ended generation. These results suggest that drifting over token sequences offers a promising path toward effective one-step text generation. Our code is available at https://github.com/jyliu-ai/Seq-Drifting.

As a new paradigm of visual content generation, autoregressive text-to-image models suffer from slow inference due to their sequential token-by-token decoding process, often requiring thousands of model forward passes to generate a single image. To address this inefficiency, we propose Speculative Jacobi-Denoising Decoding (SJD2), a framework that incorporates the denoising process into Jacobi iterations to enable parallel token generation in autoregressive models. Our method introduces a next-clean-token prediction paradigm that enables the pre-trained autoregressive models to accept noise-perturbed token embeddings and predict the next clean tokens through low-cost fine-tuning. This denoising paradigm guides the model towards more stable Jacobi trajectories. During inference, our method initializes token sequences with Gaussian noise and performs iterative next-clean-token-prediction in the embedding space. We employ a probabilistic criterion to verify and accept multiple tokens in parallel, and refine the unaccepted tokens for the next iteration with the denoising trajectory. Experiments show that our method can accelerate generation by reducing model forward passes while maintaining the visual quality of generated images.

Training automated pronunciation assessment often relies on labeled learner errors or non-native corpora that are costly to collect. We propose a lightweight framework trained only on native speech resources, operating unsupervised or lightly calibrated with a small set of scored utterances. At inference, learner speech is discretized with an SSL encoder and a K-means codebook. A token language model trained on native sequences computes surprisal where higher surprisal indicates phonotactic deviation. We add a transcript-guided Text2DUnit--DTW module that predicts native token sequences from reference text and aligns them to acoustic tokens to derive error-sensitive features. Surprisal and alignment features are fused via simple regression. On SpeechOcean762, PCC improves from 0.60 to 0.66 with transcript guidance, near supervised baselines. Cross-dataset evaluation on L2-ARCTIC shows consistent gains.

Recent years have witnessed a trend that large language model (LLM) based text-to-speech (TTS) emerges into the mainstream due to their high naturalness and zero-shot capacity. In this paradigm, speech signals are discretized into token sequences, which are modeled by an LLM with text as prompts and reconstructed by a token-based vocoder to waveforms. Obviously, speech tokens play a critical role in LLM-based TTS models. Current speech tokens are learned in an unsupervised manner, which lacks explicit semantic information and alignment to the text. In this paper, we propose to represent speech with supervised semantic tokens, which are derived from a multilingual speech recognition model by inserting vector quantization into the encoder. Based on the tokens, we further propose a scalable zero-shot TTS synthesizer, CosyVoice, which consists of an LLM for text-to-token generation and a conditional flow matching model for token-to-speech synthesis. Experimental results show that supervised semantic tokens significantly outperform existing unsupervised tokens in terms of content consistency and speaker similarity for zero-shot voice cloning. Moreover, we find that utilizing large-scale data further improves the synthesis performance, indicating the scalable capacity of CosyVoice. To the best of our knowledge, this is the first attempt to involve supervised speech tokens into TTS models.

Emerging Omni-modal Large Language Models (OmniLLMs) enable unified understanding of text, audio, and video, but their long audio-video token sequences introduce substantial memory and inference costs. Existing compression methods mainly focus on selecting important tokens under fixed budgets, leaving the preceding budget-allocation problem underexplored. We show that direct query-to-audio/video similarity is unreliable for inter-modal budget allocation, and that uniform intra-modal budgets can miss key evidence while retaining redundant content. To address these limitations, we propose OmniDelta, a training-free, skill-driven framework that couples intent-aware inter-modal allocation with content-aware intra-modal allocation. OmniDelta first constructs audio and video skill pools to shift the fixed retained-token budget according to query demand, then reallocates modality budgets over audio segments and video frames using local complexity and temporal redundancy. The resulting local budgets can be combined with existing pruning strategies, preserving the total retained-token ratio while changing where the budget is spent. Experiments on four audio-video benchmarks with two Qwen2.5-Omni models show that OmniDelta establishes a new accuracy-efficiency Pareto frontier across pruning ratios. At 25% token retention on Qwen2.5-Omni-7B, OmniDelta reduces GPU memory by 22.0% and achieves a 1.64x end-to-end speedup over full-token inference.

We study the joint learning of image-to-text and text-to-image generations, which are naturally bi-directional tasks. Typical existing works design two separate task-specific models for each task, which impose expensive design efforts. In this work, we propose a unified image-and-text generative framework based on a single multimodal model to jointly study the bi-directional tasks. We adopt Transformer as our unified architecture for its strong performance and task-agnostic design. Specifically, we formulate both tasks as sequence generation tasks, where we represent images and text as unified sequences of tokens, and the Transformer learns multimodal interactions to generate sequences. We further propose two-level granularity feature representations and sequence-level training to improve the Transformer-based unified framework. Experiments show that our approach significantly improves previous Transformer-based model X-LXMERT's FID from 37.0 to 29.9 (lower is better) for text-to-image generation, and improves CIDEr-D score from 100.9% to 122.6% for fine-tuned image-to-text generation on the MS-COCO dataset. Our code is available online.

Time-series analysis is increasingly studied in multimodal settings, yet most benchmarks pair temporal signals with text or with visualizations derived from the same signal. This leaves open whether multimodal large language models (MLLMs) can integrate time series with real-world visual evidence. We introduce MMTA (multimodal temporal analysis), a benchmark of tri-modal tasks with diverse cross-modal complementarity patterns among time series, text, and vision. MMTA spans nine domains -- robotics, autonomous driving, human action, manufacturing, AR assistance, healthcare, recommendation, finance, and climate -- under video+TS and image+TS layouts, with a 3,524-sample test split covering classification and forecasting. The benchmark standardizes heterogeneous real-world sources into a shared schema with domain-specific prompts, provenance documentation, and success-weighted metrics that penalize both wrong answers and failed generations. Evaluating eight open-source and proprietary MLLMs reveals a shared bottleneck: representing time series as text creates very long token sequences and weakens fine-grained alignment with visual evidence, especially in long-video settings. We then introduce TimeOmni-v, a multimodal LLM extension with a dedicated time-series encoder, temporal positional alignment, modality-aware token layout, and a forecasting head. TimeOmni-v improves long-video classification and time-series inference efficiency, showing that MMTA not only exposes representation and grounding failures but also motivates targeted model design.

We present Lumina-mGPT, a family of multimodal autoregressive models capable of various vision and language tasks, particularly excelling in generating flexible photorealistic images from text descriptions. Unlike existing autoregressive image generation approaches, Lumina-mGPT employs a pretrained decoder-only transformer as a unified framework for modeling multimodal token sequences. Our key insight is that a simple decoder-only transformer with multimodal Generative PreTraining (mGPT), utilizing the next-token prediction objective on massive interleaved text-image sequences, can learn broad and general multimodal capabilities, thereby illuminating photorealistic text-to-image generation. Building on these pretrained models, we propose Flexible Progressive Supervised Finetuning (FP-SFT) on high-quality image-text pairs to fully unlock their potential for high-aesthetic image synthesis at any resolution while maintaining their general multimodal capabilities. Furthermore, we introduce Ominiponent Supervised Finetuning (Omni-SFT), transforming Lumina-mGPT into a foundation model that seamlessly achieves omnipotent task unification. The resulting model demonstrates versatile multimodal capabilities, including visual generation tasks like flexible text-to-image generation and controllable generation, visual recognition tasks like segmentation and depth estimation, and vision-language tasks like multiturn visual question answering. Additionally, we analyze the differences and similarities between diffusion-based and autoregressive methods in a direct comparison.

We present a text-reconstruction attack on mixture-of-experts (MoE) language models that recovers tokens from expert selections alone. In MoE models, each token is routed to a subset of expert subnetworks; we show these routing decisions leak substantially more information than previously understood. Prior work using logistic regression achieves limited reconstruction; we show that a 3-layer MLP improves this to 63.1% top-1 accuracy, and that a transformer-based sequence decoder recovers 91.2% of tokens top-1 (94.8% top-10) on 32-token sequences from OpenWebText after training on 100M tokens. These results connect MoE routing to the broader literature on embedding inversion. We outline practical leakage scenarios (e.g., distributed inference and side channels) and show that adding noise reduces but does not eliminate reconstruction. Our findings suggest that expert selections in MoE deployments should be treated as sensitive as the underlying text.

The advancement of generative AI models capable of producing text and image marks a critical step forward in the realm of multimodal intelligence, particularly for tasks involving the interleaving of both modalities. To advance this intelligence to the next stage, it is crucial for models to autonomously generate free-form interleaved text-image sequences. In this paper, we introduce ILLUME-X, an advanced unified multimodal paradigm that enables high-quality, free-form interleaved text-image generation by improving multimodal data efficiency and stabilizing the multimodal training process. ILLUME-X comprises three key components: (i) an expanded training data pipeline optimized for interleaved text-image generation, (ii) a progressive training strategy with self-adaptive objectives for free-length multimodal token sequences, and (iii) an objective and comprehensive evaluation method ILScore for interleaved text-image sequences. Notably, our ILLUME-X outperforms previous unified models across multiple interleaved text-image generation tasks like style transfer, image decomposition and storytelling.

Diffusion language models decode text by iteratively denoising masked token sequences, making the choice of which positions to decode a central inference-time decision. Most training-free decoding strategies use model confidence for position selection, assuming that high-confidence positions are ready to be decoded. In this work, we revisit this assumption by studying when confidence misleads fully non-autoregressive (fully non-AR) decoding. EOT tokens can receive high confidence and cause incomplete generation; inserting a suffix anchor can mitigate this issue but introduces local overconfidence near the anchor, causing anchor-adjacent tokens to be decoded too early. To address these issues, we propose Suffix-Anchored Confidence Modulation, a simple training-free method that inserts a short suffix anchor to encourage response completion and modulates confidence near the anchor according to decoding progress. This preserves the response-completion benefit of suffix anchoring while reducing premature decoding of anchor-adjacent tokens. Across text-only reasoning, vision-language reasoning, and code-generation benchmarks, our method consistently improves confidence-based fully non-AR decoding, outperforms explicit EOT suppression, and preserves the parallel decoding advantage of fully non-AR generation.

Mobile device operation tasks are increasingly becoming a popular multi-modal AI application scenario. Current Multi-modal Large Language Models (MLLMs), constrained by their training data, lack the capability to function effectively as operation assistants. Instead, MLLM-based agents, which enhance capabilities through tool invocation, are gradually being applied to this scenario. However, the two major navigation challenges in mobile device operation tasks, task progress navigation and focus content navigation, are significantly complicated under the single-agent architecture of existing work. This is due to the overly long token sequences and the interleaved text-image data format, which limit performance. To address these navigation challenges effectively, we propose Mobile-Agent-v2, a multi-agent architecture for mobile device operation assistance. The architecture comprises three agents: planning agent, decision agent, and reflection agent. The planning agent generates task progress, making the navigation of history operations more efficient. To retain focus content, we design a memory unit that updates with task progress. Additionally, to correct erroneous operations, the reflection agent observes the outcomes of each operation and handles any mistakes accordingly. Experimental results indicate that Mobile-Agent-v2 achieves over a 30% improvement in task completion compared to the single-agent architecture of Mobile-Agent. The code is open-sourced at https://github.com/X-PLUG/MobileAgent.

Vision Transformer (ViT) based Vision-Language Pre-training (VLP) models have demonstrated impressive performance in various tasks. However, the lengthy visual token sequences fed into ViT can lead to training inefficiency and ineffectiveness. Existing efforts address the challenge by either bottom-level patch extraction in the ViT backbone or top-level patch abstraction outside, not balancing training efficiency and effectiveness well. Inspired by text summarization in natural language processing, we propose a Bottom-Up Patch Summarization approach named BUS, coordinating bottom-level extraction and top-level abstraction to learn a concise summary of lengthy visual token sequences efficiently. Specifically, We incorporate a Text-Semantics-Aware Patch Selector (TSPS) into the ViT backbone to perform a coarse-grained visual token extraction and then attach a flexible Transformer-based Patch Abstraction Decoder (PAD) upon the backbone for top-level visual abstraction. This bottom-up collaboration enables our BUS to yield high training efficiency while maintaining or even improving effectiveness. We evaluate our approach on various visual-language understanding and generation tasks and show competitive downstream task performance while boosting the training efficiency by 50\%. Additionally, our model achieves state-of-the-art performance on many downstream tasks by increasing input image resolution without increasing computational costs over baselines.

Visual inputs in vision-language models (VLMs) are often encoded into substantially longer token sequences than text, making visual tokens a major bottleneck for efficient inference. Abundant recent methods address this bottleneck by scoring token importance and pruning low-scoring tokens in a single pass. However, one-shot scoring is insufficient because a token's prompt-relevant usefulness depends on the evidence already retained. Motivated by this insight, we introduce DIVE (Dynamic Iterative Visual Evidence Construction), a training-free framework that recasts visual-token pruning as dynamic evidence construction. DIVE repeatedly selects the remaining token with the highest residual-conditioned score, updates the visual and prompt residuals to discount the evidence already explained, and re-evaluates the remaining tokens. This select-update-re-evaluate process builds a retained set of complementary, prompt-relevant evidence. Experiments across eight image-understanding benchmarks show that DIVE consistently preserves performance across token budgets. With an 88.9% reduction in visual tokens, DIVE retains 98.2% of the uncompressed model's average performance. Code is available at https://github.com/Zhong-Chenchen/DIVE.git.

Training strong video generation models usually requires massive datasets, large parameter counts, and substantial compute. In this work, we ask whether strong text-to-video quality is possible at a much smaller budget: fewer than 10M clips and less than 100,000 H200 GPU hours. Our core claim is that part of the answer lies in how model capacity is organized, not only in how much of it is used. In video generation, prompt alignment, temporal consistency, and fine-detail recovery can interfere with one another when they are handled through the same pathway. Motif-Video 2B addresses this by separating these roles architecturally, rather than relying on scale alone. The model combines two key ideas. First, Shared Cross-Attention strengthens text control when video token sequences become long. Second, a three-part backbone separates early fusion, joint representation learning, and detail refinement. To make this design effective under a limited compute budget, we pair it with an efficient training recipe based on dynamic token routing and early-phase feature alignment to a frozen pretrained video encoder. Our analysis shows that later blocks develop clearer cross-frame attention structure than standard single-stream baselines. On VBench, Motif-Video~2B reaches 83.76\%, surpassing Wan2.1 14B while using 7times fewer parameters and substantially less training data. These results suggest that careful architectural specialization, combined with an efficiency-oriented training recipe, can narrow or exceed the quality gap typically associated with much larger video models.

Time series forecasting traditionally relies on unimodal numerical inputs, which often struggle to capture high-level semantic patterns due to their dense and unstructured nature. While recent approaches have explored representing time series as text using large language models (LLMs), these methods remain limited by the discrete nature of token sequences and lack the perceptual intuition humans typically apply, such as interpreting visual patterns. In this paper, we propose a multimodal contrastive learning framework that transforms raw time series into structured visual and textual perspectives. Rather than using natural language or real-world images, we construct both modalities directly from numerical sequences. We then align these views in a shared semantic space via contrastive learning, enabling the model to capture richer and more complementary representations. Furthermore, we introduce a variate selection module that leverages the aligned representations to identify the most informative variables for multivariate forecasting. Extensive experiments on fifteen short-term and six long-term forecasting benchmarks demonstrate that our approach consistently outperforms strong unimodal and cross-modal baselines, highlighting the effectiveness of multimodal alignment in enhancing time series forecasting. Code is available at: https://github.com/Ironieser/TimesCLIP.

This technical report presents the training methodology and evaluation results of the open-source dewey_en_beta embedding model. The increasing demand for retrieval-augmented generation (RAG) systems and the expanding context window capabilities of large language models (LLMs) have created critical challenges for conventional embedding models. Current approaches often struggle to maintain semantic coherence when processing documents exceeding typical sequence length limitations, significantly impacting retrieval performance in knowledge-intensive applications. This paper presents dewey_en_beta, a novel text embedding model that achieves excellent performance on MTEB (Eng, v2) and LongEmbed benchmark while supporting 128K token sequences. Our technical contribution centers on chunk alignment training, an innovative methodology that enables the simultaneous generation of localized chunk embeddings and global document-level representations through distillation. Information regarding the model release can be found at https://huggingface.co/infgrad/dewey_en_beta.

Multi-LLM systems harness the complementary strengths of diverse Large Language Models, achieving performance and efficiency gains unattainable by a single model. In existing designs, LLMs communicate through text, forcing internal representations to be transformed into output token sequences. This process both loses rich semantic information and incurs token-by-token generation latency. Motivated by these limitations, we ask: Can LLMs communicate beyond text? Oracle experiments show that enriching the KV-Cache semantics can improve response quality without increasing cache size, supporting KV-Cache as an effective medium for inter-model communication. Thus, we propose Cache-to-Cache (C2C), a new paradigm for direct semantic communication between LLMs. C2C uses a neural network to project and fuse the source model's KV-cache with that of the target model to enable direct semantic transfer. A learnable gating mechanism selects the target layers that benefit from cache communication. Compared with text communication, C2C utilizes the deep, specialized semantics from both models, while avoiding explicit intermediate text generation. Experiments show that C2C achieves 8.5-10.5% higher average accuracy than individual models. It further outperforms the text communication paradigm by approximately 3.0-5.0%, while delivering an average 2.0x speedup in latency. Our code is available at https://github.com/thu-nics/C2C.

State-of-the-art text-to-image models excel at photorealistic rendering but often struggle to capture the layout and object relationships implied by complex prompts. Scene graphs provide a natural structural prior, yet previous graph-guided approaches have typically relied on heavy GAN or diffusion pipelines, which lag behind modern autoregressive architectures in both speed and fidelity. We introduce SATURN (Structured Arrangement of Triplets for Unified Rendering Networks), a lightweight extension to VAR-CLIP that translates a scene graph into a salience-ordered token sequence, enabling a frozen CLIP-VQ-VAE backbone to interpret graph structure while fine-tuning only the VAR transformer. On the Visual Genome dataset, SATURN reduces FID from 56.45% to 21.62% and increases the Inception Score from 16.03 to 24.78, outperforming prior methods such as SG2IM and SGDiff without requiring extra modules or multi-stage training. Qualitative results further confirm improvements in object count fidelity and spatial relation accuracy, showing that SATURN effectively combines structural awareness with state-of-the-art autoregressive fidelity.

This work presents VTok, a unified video tokenization framework that can be used for both generation and understanding tasks. Unlike the leading vision-language systems that tokenize videos through a naive frame-sampling strategy, we propose to decouple the spatial and temporal representations of videos by retaining the spatial features of a single key frame while encoding each subsequent frame into a single residual token, achieving compact yet expressive video tokenization. Our experiments suggest that VTok effectively reduces the complexity of video representation from the product of frame count and per-frame token count to their sum, while the residual tokens sufficiently capture viewpoint and motion changes relative to the key frame. Extensive evaluations demonstrate the efficacy and efficiency of VTok: it achieves notably higher performance on a range of video understanding and text-to-video generation benchmarks compared with baselines using naive tokenization, all with shorter token sequences per video (e.g., 3.4% higher accuracy on our TV-Align benchmark and 1.9% higher VBench score). Remarkably, VTok produces more coherent motion and stronger guidance following in text-to-video generation, owing to its more consistent temporal encoding. We hope VTok can serve as a standardized video tokenization paradigm for future research in video understanding and generation.

We propose a cross-lingual neural codec language model, VALL-E X, for cross-lingual speech synthesis. Specifically, we extend VALL-E and train a multi-lingual conditional codec language model to predict the acoustic token sequences of the target language speech by using both the source language speech and the target language text as prompts. VALL-E X inherits strong in-context learning capabilities and can be applied for zero-shot cross-lingual text-to-speech synthesis and zero-shot speech-to-speech translation tasks. Experimental results show that it can generate high-quality speech in the target language via just one speech utterance in the source language as a prompt while preserving the unseen speaker's voice, emotion, and acoustic environment. Moreover, VALL-E X effectively alleviates the foreign accent problems, which can be controlled by a language ID. Audio samples are available at https://aka.ms/vallex.

Tokenization is a key component of autoregressive (AR) generative models, converting raw data into more manageable units for modeling. Commonly, tokens describe local information, such as regions of pixels in images or word pieces in text, and AR generation predicts these tokens in a fixed order. A worthwhile question is whether token structures affect the ability to steer the generation through test-time search, where multiple candidate generations are explored and evaluated by a verifier. Using image generation as our testbed, we hypothesize that recent 1D ordered tokenizers with coarse-to-fine structure can be more amenable to search than classical 2D grid structures. This is rooted in the fact that the intermediate states in coarse-to-fine sequences carry semantic meaning that verifiers can reliably evaluate, enabling effective steering during generation. Through controlled experiments, we find that AR models trained on coarse-to-fine ordered tokens exhibit improved test-time scaling behavior compared to grid-based counterparts. Moreover, we demonstrate that, thanks to the ordered structure, pure test-time search over token sequences (i.e., without training an AR model) can perform training-free text-to-image generation when guided by an image-text verifier. Beyond this, we systematically study how classical search algorithms (best-of-N, beam search, lookahead search) interact with different token structures, as well as the role of different verifiers and AR priors. Our results highlight the impact of token structure on inference-time scalability and provide practical guidance for test-time scaling in AR models.

Large language models (LLMs) have demonstrated remarkable capabilities in generating high-quality texts across diverse domains. However, the potential misuse of LLMs has raised significant concerns, underscoring the urgent need for reliable detection of LLM-generated texts. Conventional training-based detectors often struggle with generalization, particularly in cross-domain and cross-model scenarios. In contrast, training-free methods, which focus on inherent discrepancies through carefully designed statistical features, offer improved generalization and interpretability. Despite this, existing training-free detection methods typically rely on global text sequence statistics, neglecting the modeling of local discriminative features, thereby limiting their detection efficacy. In this work, we introduce a novel training-free detector, termed Lastde that synergizes local and global statistics for enhanced detection. For the first time, we introduce time series analysis to LLM-generated text detection, capturing the temporal dynamics of token probability sequences. By integrating these local statistics with global ones, our detector reveals significant disparities between human and LLM-generated texts. We also propose an efficient alternative, Lastde++ to enable real-time detection. Extensive experiments on six datasets involving cross-domain, cross-model, and cross-lingual detection scenarios, under both white-box and black-box settings, demonstrated that our method consistently achieves state-of-the-art performance. Furthermore, our approach exhibits greater robustness against paraphrasing attacks compared to existing baseline methods.

Large language models (LLMs) increasingly rely on long-context modeling for tasks such as document understanding, code analysis, and multi-step reasoning. However, scaling context windows to the million-token level brings prohibitive computational and memory costs, limiting the practicality of long-context LLMs. In this work, we take a different perspective-visual context scaling-to tackle this challenge. Instead of extending token-based sequences, we propose Glyph, a framework that renders long texts into images and processes them with vision-language models (VLMs). This approach substantially compresses textual input while preserving semantic information, and we further design an LLM-driven genetic search to identify optimal visual rendering configurations for balancing accuracy and compression. Through extensive experiments, we demonstrate that our method achieves 3-4x token compression while maintaining accuracy comparable to leading LLMs such as Qwen3-8B on various long-context benchmarks. This compression also leads to around 4x faster prefilling and decoding, and approximately 2x faster SFT training. Furthermore, under extreme compression, a 128K-context VLM could scale to handle 1M-token-level text tasks. In addition, the rendered text data benefits real-world multimodal tasks, such as document understanding. Our code and model are released at https://github.com/thu-coai/Glyph.

We study the text generation task under the approach of pre-trained language models (PLMs). Typically, an auto-regressive (AR) method is adopted for generating texts in a token-by-token manner. Despite many advantages of AR generation, it usually suffers from inefficient inference. Therefore, non-autoregressive (NAR) models are proposed to generate all target tokens simultaneously. However, NAR models usually generate texts of lower quality due to the absence of token dependency in the output text. In this paper, we propose ELMER: an efficient and effective PLM for NAR text generation to explicitly model the token dependency during NAR generation. By leveraging the early exit technique, ELMER enables the token generations at different layers, according to their prediction confidence (a more confident token will exit at a lower layer). Besides, we propose a novel pre-training objective, Layer Permutation Language Modeling, to pre-train ELMER by permuting the exit layer for each token in sequences. Experiments on three text generation tasks show that ELMER significantly outperforms NAR models and further narrows the performance gap with AR PLMs (\eg ELMER (29.92) vs BART (30.61) ROUGE-L in XSUM) while achieving over 10 times inference speedup.

Watermarking for large language models (LLMs) is a promising approach for detecting LLM-generated text and enabling responsible deployment. However, existing watermarking methods are often vulnerable to semantic-invariant attacks, such as paraphrasing. We propose PASA, a principled, robust, and distortion-free watermarking algorithm that embeds and detects a watermark at the semantic level. PASA operates on semantic clusters in a latent embedding space and constructs a distributional dependency between token and auxiliary sequences via shared randomness synchronized by a secret key and semantic history. This design is grounded in our theoretical framework that characterizes a jointly optimal embedding-detection pair, achieving the fundamental trade-offs among detection accuracy, robustness, and distortion. Evaluations across multiple LLMs and semantic-invariant attacks demonstrate that PASA remains robust even under strong paraphrasing attacks while preserving high text quality, outperforming standard vocabulary-space baselines. Ablation studies further validate the effectiveness of our hyperparameter choices. Webpage: https://ai-kunkun.github.io/PASA_page/.

We present a self-supervised learning framework, COCO-LM, that pretrains Language Models by COrrecting and COntrasting corrupted text sequences. Following ELECTRA-style pretraining, COCO-LM employs an auxiliary language model to corrupt text sequences, upon which it constructs two new tasks for pretraining the main model. The first token-level task, Corrective Language Modeling, is to detect and correct tokens replaced by the auxiliary model, in order to better capture token-level semantics. The second sequence-level task, Sequence Contrastive Learning, is to align text sequences originated from the same source input while ensuring uniformity in the representation space. Experiments on GLUE and SQuAD demonstrate that COCO-LM not only outperforms recent state-of-the-art pretrained models in accuracy, but also improves pretraining efficiency. It achieves the MNLI accuracy of ELECTRA with 50% of its pretraining GPU hours. With the same pretraining steps of standard base/large-sized models, COCO-LM outperforms the previous best models by 1+ GLUE average points.

With the help of simple fine-tuning, one can artificially embed hidden text into large language models (LLMs). This text is revealed only when triggered by a specific query to the LLM. Two primary applications are LLM fingerprinting and steganography. In the context of LLM fingerprinting, a unique text identifier (fingerprint) is embedded within the model to verify licensing compliance. In the context of steganography, the LLM serves as a carrier for hidden messages that can be disclosed through a designated trigger. Our work demonstrates that embedding hidden text in the LLM via fine-tuning, though seemingly secure due to the vast number of potential triggers (any sequence of characters or tokens could serve as a trigger), is susceptible to extraction through analysis of the LLM's output decoding process. We propose a novel approach to extraction called Unconditional Token Forcing. It is premised on the hypothesis that iteratively feeding each token from the LLM's vocabulary into the model should reveal sequences with abnormally high token probabilities, indicating potential embedded text candidates. Additionally, our experiments show that when the first token of a hidden fingerprint is used as an input, the LLM not only produces an output sequence with high token probabilities, but also repetitively generates the fingerprint itself. We also present a method to hide text in such a way that it is resistant to Unconditional Token Forcing, which we named Unconditional Token Forcing Confusion.

Recently, many studies have demonstrated that exclusively incorporating OCR-derived text and spatial layouts with large language models (LLMs) can be highly effective for document understanding tasks. However, existing methods that integrate spatial layouts with text have limitations, such as producing overly long text sequences or failing to fully leverage the autoregressive traits of LLMs. In this work, we introduce Interleaving Layout and Text in a Large Language Model (LayTextLLM)} for document understanding. LayTextLLM projects each bounding box to a single embedding and interleaves it with text, efficiently avoiding long sequence issues while leveraging autoregressive traits of LLMs. LayTextLLM not only streamlines the interaction of layout and textual data but also shows enhanced performance in KIE and VQA. Comprehensive benchmark evaluations reveal significant improvements of LayTextLLM, with a 15.2% increase on KIE tasks and 10.7% on VQA tasks compared to previous SOTA OCR-based LLMs. All resources are available at https://github.com/LayTextLLM/LayTextLLM.

Interpretability is a key challenge in fostering trust for Large Language Models (LLMs), which stems from the complexity of extracting reasoning from model's parameters. We present the Frame Representation Hypothesis, a theoretically robust framework grounded in the Linear Representation Hypothesis (LRH) to interpret and control LLMs by modeling multi-token words. Prior research explored LRH to connect LLM representations with linguistic concepts, but was limited to single token analysis. As most words are composed of several tokens, we extend LRH to multi-token words, thereby enabling usage on any textual data with thousands of concepts. To this end, we propose words can be interpreted as frames, ordered sequences of vectors that better capture token-word relationships. Then, concepts can be represented as the average of word frames sharing a common concept. We showcase these tools through Top-k Concept-Guided Decoding, which can intuitively steer text generation using concepts of choice. We verify said ideas on Llama 3.1, Gemma 2, and Phi 3 families, demonstrating gender and language biases, exposing harmful content, but also potential to remediate them, leading to safer and more transparent LLMs. Code is available at https://github.com/phvv-me/frame-representation-hypothesis.git

LLMs process text as sequences of tokens that roughly correspond to words, where less common words are represented by multiple tokens. However, individual tokens are often semantically unrelated to the meanings of the words/concepts they comprise. For example, Llama-2-7b's tokenizer splits the word "northeastern" into the tokens ['_n', 'ort', 'he', 'astern'], none of which correspond to semantically meaningful units like "north" or "east." Similarly, the overall meanings of named entities like "Neil Young" and multi-word expressions like "break a leg" cannot be directly inferred from their constituent tokens. Mechanistically, how do LLMs convert such arbitrary groups of tokens into useful higher-level representations? In this work, we find that last token representations of named entities and multi-token words exhibit a pronounced "erasure" effect, where information about previous and current tokens is rapidly forgotten in early layers. Using this observation, we propose a method to "read out" the implicit vocabulary of an autoregressive LLM by examining differences in token representations across layers, and present results of this method for Llama-2-7b and Llama-3-8B. To our knowledge, this is the first attempt to probe the implicit vocabulary of an LLM.

Neural text generation is a key tool in natural language applications, but it is well known there are major problems at its core. In particular, standard likelihood training and decoding leads to dull and repetitive outputs. While some post-hoc fixes have been proposed, in particular top-k and nucleus sampling, they do not address the fact that the token-level probabilities predicted by the model are poor. In this paper we show that the likelihood objective itself is at fault, resulting in a model that assigns too much probability to sequences containing repeats and frequent words, unlike those from the human training distribution. We propose a new objective, unlikelihood training, which forces unlikely generations to be assigned lower probability by the model. We show that both token and sequence level unlikelihood training give less repetitive, less dull text while maintaining perplexity, giving superior generations using standard greedy or beam search. According to human evaluations, our approach with standard beam search also outperforms the currently popular decoding methods of nucleus sampling or beam blocking, thus providing a strong alternative to existing techniques.

Text-motion retrieval aims to learn a semantically aligned latent space between natural language descriptions and 3D human motion skeleton sequences, enabling bidirectional search across the two modalities. Most existing methods use a dual-encoder framework that compresses motion and text into global embeddings, discarding fine-grained local correspondences, and thus reducing accuracy. Additionally, these global-embedding methods offer limited interpretability of the retrieval results. To overcome these limitations, we propose an interpretable, joint-angle-based motion representation that maps joint-level local features into a structured pseudo-image, compatible with pre-trained Vision Transformers. For text-to-motion retrieval, we employ MaxSim, a token-wise late interaction mechanism, and enhance it with Masked Language Modeling regularization to foster robust, interpretable text-motion alignment. Extensive experiments on HumanML3D and KIT-ML show that our method outperforms state-of-the-art text-motion retrieval approaches while offering interpretable fine-grained correspondences between text and motion. The code is available in the supplementary material.

The integration of molecule and language has garnered increasing attention in molecular science. Recent advancements in Language Models (LMs) have demonstrated potential for the comprehensive modeling of molecule and language. However, existing works exhibit notable limitations. Most existing works overlook the modeling of 3D information, which is crucial for understanding molecular structures and also functions. While some attempts have been made to leverage external structure encoding modules to inject the 3D molecular information into LMs, there exist obvious difficulties that hinder the integration of molecular structure and language text, such as modality alignment and separate tuning. To bridge this gap, we propose 3D-MolT5, a unified framework designed to model both 1D molecular sequence and 3D molecular structure. The key innovation lies in our methodology for mapping fine-grained 3D substructure representations (based on 3D molecular fingerprints) to a specialized 3D token vocabulary for 3D-MolT5. This 3D structure token vocabulary enables the seamless combination of 1D sequence and 3D structure representations in a tokenized format, allowing 3D-MolT5 to encode molecular sequence (SELFIES), molecular structure, and text sequences within a unified architecture. Alongside, we further introduce 1D and 3D joint pre-training to enhance the model's comprehension of these diverse modalities in a joint representation space and better generalize to various tasks for our foundation model. Through instruction tuning on multiple downstream datasets, our proposed 3D-MolT5 shows superior performance than existing methods in molecular property prediction, molecule captioning, and text-based molecule generation tasks. Our code will be available on GitHub soon.

Camera trajectories control viewpoint changes in video generation, scene reconstruction, and robotic perception. Generating them from language requires both scene geometry and target-aware framing. We introduce OmniCam, an autoregressive model that generates camera pose sequences from a single panorama and textual trajectory descriptions. Its geometry-grounded pose token learning combines three components: a panoramic point-cloud encoder for omnidirectional geometric context; hybrid absolute-rotation and relative-translation tokenization with temporally consistent quaternion signs; and separate geometric and semantic conditioning streams with an explicit 3D target anchor. We also construct OmniCaT, containing 267,700 trajectories across four camera behaviors. On the reported OmniCaT evaluation, OmniCam reduces trajectory errors by 28--47% and collision rate by 65.8% relative to GenDoP retrained on OmniCaT. Against the best baseline for each metric, the ATE and collision reductions are 43.0% and 62.3%, respectively. Component ablations support the use of geometric and target-aware conditioning, while downstream experiments examine camera-controlled video generation and robotic active perception.

While next-token prediction is considered a promising path towards artificial general intelligence, it has struggled to excel in multimodal tasks, which are still dominated by diffusion models (e.g., Stable Diffusion) and compositional approaches (e.g., CLIP combined with LLMs). In this paper, we introduce Emu3, a new suite of state-of-the-art multimodal models trained solely with next-token prediction. By tokenizing images, text, and videos into a discrete space, we train a single transformer from scratch on a mixture of multimodal sequences. Emu3 outperforms several well-established task-specific models in both generation and perception tasks, surpassing flagship models such as SDXL and LLaVA-1.6, while eliminating the need for diffusion or compositional architectures. Emu3 is also capable of generating high-fidelity video via predicting the next token in a video sequence. We simplify complex multimodal model designs by converging on a singular focus: tokens, unlocking great potential for scaling both during training and inference. Our results demonstrate that next-token prediction is a promising path towards building general multimodal intelligence beyond language. We open-source key techniques and models to support further research in this direction.

Large Language Models (LLMs) have revolutionized natural language processing, excelling in handling longer sequences. However, the inefficiency and redundancy in processing extended in-context tokens remain a challenge. Many attempts to address this rely on compressing tokens with smaller text encoders, yet we question whether text encoders are truly indispensable. Our journey leads to an unexpected discovery-a much smaller vision encoder, applied directly to sequences of text tokens, can rival text encoders on text tasks. When pre-trained on large amounts of data and transferred to multiple mid-sized or small text understanding benchmarks, VIST leads to comparable results with 16% fewer FLOPs and 50% less memory usage. We further uncover significant token redundancy and devise a frequency-based masking strategy to guide the focus of the visual encoder toward the most critical tokens. Interestingly, we observe the trained visual encoder performs like a summarizer, selectively ignoring less important words such as prepositions and conjunctions. This approach delivers remarkable results, outperforming traditional text encoder-based methods by 5.7% on average over benchmarks like TriviaQA, NQ, PopQA, TREF, SST2, and SST5, setting a new standard for token efficiency in LLMs.

Autoregressive language models (ARMs) deliver strong likelihoods, but are inherently serial: they generate one token per forward pass, which limits throughput and inflates latency for long sequences. Diffusion Language Models (DLMs) parallelize across positions and thus appear promising for language generation, yet standard discrete diffusion typically needs hundreds to thousands of model evaluations to reach high quality, trading serial depth for iterative breadth. We introduce FS-DFM, Few-Step Discrete Flow-Matching. A discrete flow-matching model designed for speed without sacrificing quality. The core idea is simple: make the number of sampling steps an explicit parameter and train the model to be consistent across step budgets, so one big move lands where many small moves would. We pair this with a reliable update rule that moves probability in the right direction without overshooting, and with strong teacher guidance distilled from long-run trajectories. Together, these choices make few-step sampling stable, accurate, and easy to control. On language modeling benchmarks, FS-DFM with 8 sampling steps achieves perplexity parity with a 1,024-step discrete-flow baseline for generating 1,024 tokens using a similar-size model, delivering up to 128 times faster sampling and corresponding latency/throughput gains.

Pre-training large language models is known to be extremely resource intensive and often times inefficient, under-utilizing the information encapsulated in the training text sequences. In this paper, we present SpacTor, a new training procedure consisting of (1) a hybrid objective combining span corruption (SC) and token replacement detection (RTD), and (2) a two-stage curriculum that optimizes the hybrid objective over the initial tau iterations, then transitions to standard SC loss. We show empirically that the effectiveness of the hybrid objective is tied to the two-stage pre-training schedule, and provide extensive analysis on why this is the case. In our experiments with encoder-decoder architectures (T5) on a variety of NLP tasks, SpacTor-T5 yields the same downstream performance as standard SC pre-training, while enabling a 50% reduction in pre-training iterations and 40% reduction in total FLOPs. Alternatively, given the same amount of computing budget, we find that SpacTor results in significantly improved downstream benchmark performance.

We present AMix-2, a protein-text foundation model that establishes protein as a native modality in large language models (LLMs), unifying protein understanding and sequence design within a single foundation model. AMix-2 is built upon two key ideas: (1) a unified protein-text formulation that embeds natural language and protein sequence in a shared token space, enabling one model to perform biological reasoning and conditional design instead of separate downstream task-specialized models; and (2) a block-wise diffusion language modeling backbone that combines causal generation across blocks with bidirectional context and iterative refinement within blocks. This scheme better matches the intrinsic nature of proteins than a strict left-to-right factorization. To evaluate protein foundation models under realistic generalization settings, we further introduce ProteinArena, a comprehensive benchmark with time-aware and homology-aware protocols across various understanding and design tasks, and with baselines covering classical bioinformatics tools, protein-specialized models and LLMs. On ProteinArena, AMix-2 outperforms frontier LLMs and demonstrates competitive performance to task-specific protein models. Controlled experiments further show that the diffusion-based paradigm generally surpasses its autoregressive counterpart, highlighting the advantage of flexible generation order for protein sequences. We release both AMix-2 and ProteinArena to facilitate open research in protein foundation models.

We present a scientific reasoning foundation model that aligns natural language with heterogeneous scientific representations. The model is pretrained on a 206B-token corpus spanning scientific text, pure sequences, and sequence-text pairs, then aligned via SFT on 40M instructions, annealed cold-start bootstrapping to elicit long-form chain-of-thought, and reinforcement learning with task-specific reward shaping, which instills deliberate scientific reasoning. It supports four capability families, covering up to 103 tasks across workflows: (i) faithful translation between text and scientific formats, (ii) text/knowledge extraction, (iii) property prediction, (iv) property classification, (v) unconditional and conditional sequence generation and design. Compared with specialist systems, our approach broadens instruction coverage, improves cross-domain generalization, and enhances fidelity. We detail data curation and training and show that cross-discipline learning strengthens transfer and downstream reliability. The model, instruct tuning datasets and the evaluation code are open-sourced at https://huggingface.co/SciReason and https://github.com/open-sciencelab/SciReason.

We introduce HOIGPT, a token-based generative method that unifies 3D hand-object interactions (HOI) perception and generation, offering the first comprehensive solution for captioning and generating high-quality 3D HOI sequences from a diverse range of conditional signals (\eg text, objects, partial sequences). At its core, HOIGPT utilizes a large language model to predict the bidrectional transformation between HOI sequences and natural language descriptions. Given text inputs, HOIGPT generates a sequence of hand and object meshes; given (partial) HOI sequences, HOIGPT generates text descriptions and completes the sequences. To facilitate HOI understanding with a large language model, this paper introduces two key innovations: (1) a novel physically grounded HOI tokenizer, the hand-object decomposed VQ-VAE, for discretizing HOI sequences, and (2) a motion-aware language model trained to process and generate both text and HOI tokens. Extensive experiments demonstrate that HOIGPT sets new state-of-the-art performance on both text generation (+2.01% R Precision) and HOI generation (-2.56 FID) across multiple tasks and benchmarks.

The BERT family of neural language models have become highly popular due to their ability to provide sequences of text with rich context-sensitive token encodings which are able to generalise well to many NLP tasks. We introduce gaBERT, a monolingual BERT model for the Irish language. We compare our gaBERT model to multilingual BERT and the monolingual Irish WikiBERT, and we show that gaBERT provides better representations for a downstream parsing task. We also show how different filtering criteria, vocabulary size and the choice of subword tokenisation model affect downstream performance. We compare the results of fine-tuning a gaBERT model with an mBERT model for the task of identifying verbal multiword expressions, and show that the fine-tuned gaBERT model also performs better at this task. We release gaBERT and related code to the community.

In this report, we present HyperCLOVA X 8B Omni, the first any-to-any omnimodal model in the HyperCLOVA X family that supports text, audio, and vision as both inputs and outputs. By consolidating multimodal understanding and generation into a single model rather than separate modality-specific pipelines, HyperCLOVA X 8B Omni serves as an 8B-scale omni-pathfinding point toward practical any-to-any omni assistants. At a high level, the model unifies modalities through a shared next-token prediction interface over an interleaved multimodal sequence, while vision and audio encoders inject continuous embeddings for fine-grained understanding and grounding. Empirical evaluations demonstrate competitive performance against comparably sized models across diverse input-output combinations spanning text, audio, and vision, in both Korean and English. We anticipate that the open-weight release of HyperCLOVA X 8B Omni will support a wide range of research and deployment scenarios.

Reasoning rerankers write a rationale before ranking a candidate slate, and existing systems read item metadata to do so, even though generative recommenders increasingly represent items as compact Semantic IDs (SIDs). Ranking from SIDs alone has two appeals: SID prompts are far shorter than the matched item text, and although item codes are fixed from content, the backbone learns their token embeddings in part from user-item interaction sequences, so the tokens can carry behavioral signal that item text lacks. That training targets next-item generation, and whether it supports ranking a supplied slate from SIDs alone is untested. We build ReRankID, a controlled testbed in which models reason and rank from a history and slate shown only as SIDs, varying item rendering, history length, and slate size one at a time. On this testbed, such models often copy the input order instead of reranking, and readable metadata does not repair the failure. We compare supervised fine-tuning, rejection-sampled self-training, on-policy distillation, and verifier-based reinforcement learning as post-training methods and find that they elicit the missing behavior. The strongest post-trained model, the 8B model trained with a graded ranking reward, gives the best SID-only ranking and matches strong text-reading LLMs whose prompts are about 20x longer. It ranks above random with no history at all, where a caption-reading reference does not, and it keeps its gains at long histories, where text prompts pass 50k tokens and the caption-reading reference stops improving. In a paired rationale audit, this model argues trade-offs better than that reference but describes items less accurately. The common post-training methods we test thus elicit ranking from SIDs but not faithful item descriptions, which calls for post-training that improves the reasoning itself, not only the ranking it produces.

Large Language Models (LLMs) have revolutionized language modeling through autoregressive generation, enabling strong performance across a wide range of tasks. Recently, Diffusion Language Models (DLMs) have emerged as an alternative paradigm that generates text through iterative denoising rather than next-token prediction, allowing parallel refinement of entire sequences. While numerous diffusion-based architectures have been proposed, differences in evaluation protocols, datasets, inference budgets, and generation hyperparameters make it difficult to compare their capabilities and understand the trade-offs they offer. In this work, we present a systematic experimental analysis of modern DLMs. Specifically, we evaluate eight state-of-the-art DLMs across eight benchmarks spanning reasoning, coding, translation, knowledge, and structured problem solving, while explicitly considering both generation quality and computational efficiency. Beyond downstream evaluation, we analyze the impact of key inference-time factors, including denoising steps, context length, block size, and parallel unmasking strategies, and complement large-scale experiments with controlled comparisons of smaller models trained under identical conditions. Our analysis highlights the strengths and limitations of diffusion-based language modeling across different tasks, architectures, and inference budgets. We show that the behavior of DLMs is strongly influenced by generation-time design choices, leading to distinct trade-offs between performance and computational efficiency. Overall, our study provides practical insights into the capabilities and deployment characteristics of contemporary DLMs.

Inspired by the strong ties between vision and language, the two intimate human sensing and communication modalities, our paper aims to explore the generation of 3D human full-body motions from texts, as well as its reciprocal task, shorthanded for text2motion and motion2text, respectively. To tackle the existing challenges, especially to enable the generation of multiple distinct motions from the same text, and to avoid the undesirable production of trivial motionless pose sequences, we propose the use of motion token, a discrete and compact motion representation. This provides one level playing ground when considering both motions and text signals, as the motion and text tokens, respectively. Moreover, our motion2text module is integrated into the inverse alignment process of our text2motion training pipeline, where a significant deviation of synthesized text from the input text would be penalized by a large training loss; empirically this is shown to effectively improve performance. Finally, the mappings in-between the two modalities of motions and texts are facilitated by adapting the neural model for machine translation (NMT) to our context. This autoregressive modeling of the distribution over discrete motion tokens further enables non-deterministic production of pose sequences, of variable lengths, from an input text. Our approach is flexible, could be used for both text2motion and motion2text tasks. Empirical evaluations on two benchmark datasets demonstrate the superior performance of our approach on both tasks over a variety of state-of-the-art methods. Project page: https://ericguo5513.github.io/TM2T/

Recent progress in scaling up large language models has shown impressive capabilities in performing few-shot learning across a wide range of text-based tasks. However, a key limitation is that these language models fundamentally lack visual perception - a crucial attribute needed to extend these models to be able to interact with the real world and solve vision tasks, such as in visual-question answering and robotics. Prior works have largely connected image to text through pretraining and/or fine-tuning on curated image-text datasets, which can be a costly and expensive process. In order to resolve this limitation, we propose a simple yet effective approach called Language-Quantized AutoEncoder (LQAE), a modification of VQ-VAE that learns to align text-image data in an unsupervised manner by leveraging pretrained language models (e.g., BERT, RoBERTa). Our main idea is to encode image as sequences of text tokens by directly quantizing image embeddings using a pretrained language codebook. We then apply random masking followed by a BERT model, and have the decoder reconstruct the original image from BERT predicted text token embeddings. By doing so, LQAE learns to represent similar images with similar clusters of text tokens, thereby aligning these two modalities without the use of aligned text-image pairs. This enables few-shot image classification with large language models (e.g., GPT-3) as well as linear classification of images based on BERT text features. To the best of our knowledge, our work is the first work that uses unaligned images for multimodal tasks by leveraging the power of pretrained language models.

Large Language Models (LLMs) excel in text-based natural language processing tasks but remain constrained by their reliance on textual inputs and outputs. To enable more natural human-LLM interaction, recent progress have focused on deriving a spoken language model (SLM) that can not only listen but also generate speech. To achieve this, a promising direction is to conduct speech-text joint modeling. However, recent SLM still lag behind text LLM due to the modality mismatch. One significant mismatch can be the sequence lengths between speech and text tokens. To address this, we introduce Text-Aligned Speech Tokenization and Embedding (TASTE), a method that directly addresses the modality gap by aligning speech token with the corresponding text transcription during the tokenization stage. We propose a method that can achieve this through the special aggregation mechanism and with speech reconstruction as the training objective. We conduct extensive experiments and show that TASTE can preserve essential paralinguistic information while dramatically reducing the token sequence length. Furthermore, by leveraging TASTE, we can adapt text-based LLMs into effective SLMs with parameter-efficient fine-tuning techniques such as Low-Rank Adaptation (LoRA). Experimental results on benchmark tasks, including SALMON and StoryCloze, demonstrate that TASTE-based SLMs perform similarly to previous full-finetuning methods. To our knowledge, TASTE is the first end-to-end approach that utilizes a reconstruction objective to automatically learn a text-aligned speech tokenization and embedding suitable for spoken language modeling. Our demo, code, and models are publicly available at https://github.com/mtkresearch/TASTE-SpokenLM.

Speech language models (SLMs) have been extensively studied, with the common paradigm incorporating text data and pre-trained text LMs. A leading approach is speech-text interleaving in which models are trained over sequences containing both speech and text tokens, aiming to boost even speech-only capabilities. Yet the way these two modalities interact in the model latent space remains unclear. In this work, we analyze interleaved speech-text LMs from different model families and sizes through the scope of the logit lens to provide such insight. We reveal that these models go through an implicit transcription phase in which the text token of the spoken word becomes decodable in intermediate layers, despite not being trained for speech recognition. The transcription of the word appears as one of the top candidate words for as much as 77\% of the data. Following this stage, the models proceed to predict the next word in the text space before transforming back to the speech domain. We finally analyze the role of interleaving data, and initializing from text LMs in eliciting this behavior, as well as seeing how this correlates with spoken knowledge abilities. Our analysis sheds light on the internal mechanisms underlying the relationship between speech and text modalities and could shape SLM optimization.

Scalable Vector Graphics (SVG) is a popular vector image format that offers good support for interactivity and animation. Despite its appealing characteristics, creating custom SVG content can be challenging for users due to the steep learning curve required to understand SVG grammars or get familiar with professional editing software. Recent advancements in text-to-image generation have inspired researchers to explore vector graphics synthesis using either image-based methods (i.e., text -> raster image -> vector graphics) combining text-to-image generation models with image vectorization, or language-based methods (i.e., text -> vector graphics script) through pretrained large language models. However, these methods still suffer from limitations in terms of generation quality, diversity, and flexibility. In this paper, we introduce IconShop, a text-guided vector icon synthesis method using autoregressive transformers. The key to success of our approach is to sequentialize and tokenize SVG paths (and textual descriptions as guidance) into a uniquely decodable token sequence. With that, we are able to fully exploit the sequence learning power of autoregressive transformers, while enabling both unconditional and text-conditioned icon synthesis. Through standard training to predict the next token on a large-scale vector icon dataset accompanied by textural descriptions, the proposed IconShop consistently exhibits better icon synthesis capability than existing image-based and language-based methods both quantitatively and qualitatively. Meanwhile, we observe a dramatic improvement in generation diversity, which is validated by the objective Uniqueness and Novelty measures. More importantly, we demonstrate the flexibility of IconShop with multiple novel icon synthesis tasks, including icon editing, icon interpolation, icon semantic combination, and icon design auto-suggestion.

The advent of Large Multimodal Models (LMMs) has significantly enhanced Large Language Models (LLMs) to process and interpret diverse data modalities (e.g., image and video). However, as input complexity increases, particularly with long video sequences, the number of required tokens has grown significantly, leading to quadratically computational costs. This has made the efficient compression of video tokens in LMMs, while maintaining performance integrity, a pressing research challenge. In this paper, we introduce CrossLMM, decoupling long video sequences from LMMs via a dual cross-attention mechanism, which substantially reduces visual token quantity with minimal performance degradation. Specifically, we first implement a significant token reduction from pretrained visual encoders through a pooling methodology. Then, within LLM layers, we employ a visual-to-visual cross-attention mechanism, wherein the pooled visual tokens function as queries against the original visual token set. This module enables more efficient token utilization while retaining fine-grained informational fidelity. In addition, we introduce a text-to-visual cross-attention mechanism, for which the text tokens are enhanced through interaction with the original visual tokens, enriching the visual comprehension of the text tokens. Comprehensive empirical evaluation demonstrates that our approach achieves comparable or superior performance across diverse video-based LMM benchmarks, despite utilizing substantially fewer computational resources.

Omnimodal large language models (OmniLLMs) are rapidly extending multimodal reasoning to cover synchronized audio and video. However, the resulting audio-video token sequences are long, leading to high prefill latency and GPU memory usage at inference time. Existing token pruning methods, designed mainly for vision-only inputs, miss both the cross-modal links between audio and video and the user query that decides which content matters. To bridge this gap, we present Omni-Prune, a training-free, query-aware audio-visual token pruning framework that jointly removes redundancy from both modalities while keeping task-relevant cross-modal evidence. Specifically, Omni-Prune first splits the token sequence into adaptive time windows placed at audio saliency peaks, then scores audio and video tokens on a single scale that combines encoder attention with text-query relevance, and pairs related audio-video tokens so that they are kept together. Within each window, a final K-medoids step then selects a few representative tokens, adding diverse cues that score-based selection alone would miss. Extensive experiments demonstrate that Omni-Prune outperforms established baseline methods, delivering up to 3.25x prefill speedup and 1.3x memory reduction while retaining over 99% of full-model performance.

We propose UniTAB that Unifies Text And Box outputs for grounded vision-language (VL) modeling. Grounded VL tasks such as grounded captioning require the model to generate a text description and align predicted words with object regions. To achieve this, models must generate desired text and box outputs together, and meanwhile indicate the alignments between words and boxes. In contrast to existing solutions that use multiple separate modules for different outputs, UniTAB represents both text and box outputs with a shared token sequence, and introduces a special <obj> token to naturally indicate word-box alignments in the sequence. UniTAB thus could provide a more comprehensive and interpretable image description, by freely grounding generated words to object regions. On grounded captioning, UniTAB presents a simpler solution with a single output head, and significantly outperforms state of the art in both grounding and captioning evaluations. On general VL tasks that have different desired output formats (i.e., text, box, or their combination), UniTAB with a single network achieves better or comparable performance than task-specific state of the art. Experiments cover 7 VL benchmarks, including grounded captioning, visual grounding, image captioning, and visual question answering. Furthermore, UniTAB's unified multi-task network and the task-agnostic output sequence design make the model parameter efficient and generalizable to new tasks.

We present the Pathways Autoregressive Text-to-Image (Parti) model, which generates high-fidelity photorealistic images and supports content-rich synthesis involving complex compositions and world knowledge. Parti treats text-to-image generation as a sequence-to-sequence modeling problem, akin to machine translation, with sequences of image tokens as the target outputs rather than text tokens in another language. This strategy can naturally tap into the rich body of prior work on large language models, which have seen continued advances in capabilities and performance through scaling data and model sizes. Our approach is simple: First, Parti uses a Transformer-based image tokenizer, ViT-VQGAN, to encode images as sequences of discrete tokens. Second, we achieve consistent quality improvements by scaling the encoder-decoder Transformer model up to 20B parameters, with a new state-of-the-art zero-shot FID score of 7.23 and finetuned FID score of 3.22 on MS-COCO. Our detailed analysis on Localized Narratives as well as PartiPrompts (P2), a new holistic benchmark of over 1600 English prompts, demonstrate the effectiveness of Parti across a wide variety of categories and difficulty aspects. We also explore and highlight limitations of our models in order to define and exemplify key areas of focus for further improvements. See https://parti.research.google/ for high-resolution images.

While text-to-3D generation has advanced rapidly, achieving high geometric fidelity at low inference cost remains challenging. Existing text-to-3D methods either decode discrete shape tokens autoregressively or iteratively refine global 3D representations with diffusion or flow models. However, autoregressive decoding is sequential and cannot revise errors, whereas diffusion and flow-matching models repeatedly process the full representation, making high-quality generation increasingly expensive. In this paper, we propose Block3D, a block-wise diffusion framework that partitions the discrete shape-token sequence into contiguous blocks, generates the blocks autoregressively, and jointly denoises all tokens within the current block. To alleviate error accumulation, we introduce confidence-guided intra-block correction, which revises low-confidence tokens before each block is finalized. On a held-out set from TRELLIS-500K, Block3D reduces mean end-to-end generation time from 25.71 seconds to 4.99 seconds, achieving a 5.15times speedup over the fine-tuned autoregressive baseline without sacrificing geometric fidelity.

Transforming natural-language requests into reliable, production-ready data transformations remains challenging: correctness depends on precise schema linking and warehouse-specific SQL dialects, while the strongest supervision available during training--execution success and result matching--are provided only at the sequence level. At the same time, assembling large, execution-validated corpora is costly, and token-level objectives misalign with these global signals, yielding unstable optimization and limited portability. We introduce Thinkquel, a fine-tuned model for producing robust, portable, and execution-validated database queries. Methodologies in Thinkquel integrates a novel synthetic data pipeline, TS-SQL, that leverages dbt as a portable intermediate representation with a span-aware reinforcement learning objective, and Token-Sequence GRPO (TS-GRPO), specifically designed to bridge the gap between token-level training signals and sequence-level execution rewards when finetuning LLMs. On the 500-example TS-SQL test set, Thinkquel (32B) reaches 93.2\% execution success and 61.8\% exact-result match with a two-stage SFT curriculum, improving over the base model by 67.2\% (exec.) and 44.4\% (match). In Spider (14B) experiments, TS-GRPO increases training stability and speeds convergence of the execution-match reward relative to GRPO and GSPO.

Large language models have proven themselves highly flexible, able to solve a wide range of generative tasks, such as abstractive summarization and open-ended question answering. In this paper we extend the capabilities of LLMs by directly attaching a small audio encoder allowing it to perform speech recognition. By directly prepending a sequence of audial embeddings to the text token embeddings, the LLM can be converted to an automatic speech recognition (ASR) system, and be used in the exact same manner as its textual counterpart. Experiments on Multilingual LibriSpeech (MLS) show that incorporating a conformer encoder into the open sourced LLaMA-7B allows it to outperform monolingual baselines by 18% and perform multilingual speech recognition despite LLaMA being trained overwhelmingly on English text. Furthermore, we perform ablation studies to investigate whether the LLM can be completely frozen during training to maintain its original capabilities, scaling up the audio encoder, and increasing the audio encoder striding to generate fewer embeddings. The results from these studies show that multilingual ASR is possible even when the LLM is frozen or when strides of almost 1 second are used in the audio encoder opening up the possibility for LLMs to operate on long-form audio.

In this paper, we leverage low-level compiler intermediate representations (IR) to improve code translation. Traditional transpilers rely on syntactic information and handcrafted rules, which limits their applicability and produces unnatural-looking code. Applying neural machine translation (NMT) approaches to code has successfully broadened the set of programs on which one can get a natural-looking translation. However, they treat the code as sequences of text tokens, and still do not differentiate well enough between similar pieces of code which have different semantics in different languages. The consequence is low quality translation, reducing the practicality of NMT, and stressing the need for an approach significantly increasing its accuracy. Here we propose to augment code translation with IRs, specifically LLVM IR, with results on the C++, Java, Rust, and Go languages. Our method improves upon the state of the art for unsupervised code translation, increasing the number of correct translations by 11% on average, and up to 79% for the Java -> Rust pair with greedy decoding. We extend previous test sets for code translation, by adding hundreds of Go and Rust functions. Additionally, we train models with high performance on the problem of IR decompilation, generating programming source code from IR, and study using IRs as intermediary pivot for translation.

We present Emu, a Transformer-based multimodal foundation model, which can seamlessly generate images and texts in multimodal context. This omnivore model can take in any single-modality or multimodal data input indiscriminately (e.g., interleaved image, text and video) through a one-model-for-all autoregressive training process. First, visual signals are encoded into embeddings, and together with text tokens form an interleaved input sequence. Emu is then end-to-end trained with a unified objective of classifying the next text token or regressing the next visual embedding in the multimodal sequence. This versatile multimodality empowers the exploration of diverse pretraining data sources at scale, such as videos with interleaved frames and text, webpages with interleaved images and text, as well as web-scale image-text pairs and video-text pairs. Emu can serve as a generalist multimodal interface for both image-to-text and text-to-image tasks, and supports in-context image and text generation. Across a broad range of zero-shot/few-shot tasks including image captioning, visual question answering, video question answering and text-to-image generation, Emu demonstrates superb performance compared to state-of-the-art large multimodal models. Extended capabilities such as multimodal assistants via instruction tuning are also demonstrated with impressive performance.

We present daVinci-MagiHuman, an open-source audio-video generative foundation model for human-centric generation. daVinci-MagiHuman jointly generates synchronized video and audio using a single-stream Transformer that processes text, video, and audio within a unified token sequence via self-attention only. This single-stream design avoids the complexity of multi-stream or cross-attention architectures while remaining easy to optimize with standard training and inference infrastructure. The model is particularly strong in human-centric scenarios, producing expressive facial performance, natural speech-expression coordination, realistic body motion, and precise audio-video synchronization. It supports multilingual spoken generation across Chinese (Mandarin and Cantonese), English, Japanese, Korean, German, and French. For efficient inference, we combine the single-stream backbone with model distillation, latent-space super-resolution, and a Turbo VAE decoder, enabling generation of a 5-second 256p video in 2 seconds on a single H100 GPU. In automatic evaluation, daVinci-MagiHuman achieves the highest visual quality and text alignment among leading open models, along with the lowest word error rate (14.60%) for speech intelligibility. In pairwise human evaluation, it achieves win rates of 80.0% against Ovi 1.1 and 60.9% against LTX 2.3 over 2000 comparisons. We open-source the complete model stack, including the base model, the distilled model, the super-resolution model, and the inference codebase.

Recent advances in foundation models highlight a clear trend toward unification and scaling, showing emergent capabilities across diverse domains. While image generation and editing have rapidly transitioned from task-specific to unified frameworks, video generation and editing remain fragmented due to architectural limitations and data scarcity. In this work, we introduce EditVerse, a unified framework for image and video generation and editing within a single model. By representing all modalities, i.e., text, image, and video, as a unified token sequence, EditVerse leverages self-attention to achieve robust in-context learning, natural cross-modal knowledge transfer, and flexible handling of inputs and outputs with arbitrary resolutions and durations. To address the lack of video editing training data, we design a scalable data pipeline that curates 232K video editing samples and combines them with large-scale image and video datasets for joint training. Furthermore, we present EditVerseBench, the first benchmark for instruction-based video editing covering diverse tasks and resolutions. Extensive experiments and user studies demonstrate that EditVerse achieves state-of-the-art performance, surpassing existing open-source and commercial models, while exhibiting emergent editing and generation abilities across modalities.

Despite the strong performance of large audio language models (LALMs) in various tasks, exactly how and where they integrate acoustic features with textual context remains unclear. We adapt causal tracing to investigate the internal information flow of LALMs during audio comprehension. By conducting layer-wise and token-wise analyses across DeSTA, Qwen, and Voxtral, we evaluate the causal effects of individual hidden states. Layer-wise analysis identifies different fusion strategies, from progressive integration in DeSTA to abrupt late-stage fusion in Qwen. Token-wise analysis shows that the final sequence token acts as an informational bottleneck where the network decisively retrieves relevant information from the audio. We also observe an attention-like query mechanism at intermediate token positions that triggers the model to pull task-relevant audio context. These findings provide a clear characterization of when and where multi-modal integration occurs within LALMs.

Pre-trained language models (PLMs), such as BERT and GPT, have revolutionized the field of NLP, not only in the general domain but also in the biomedical domain. Most prior efforts in building biomedical PLMs have resorted simply to domain adaptation and focused mainly on English. In this work we introduce eHealth, a Chinese biomedical PLM built from scratch with a new pre-training framework. This new framework pre-trains eHealth as a discriminator through both token- and sequence-level discrimination. The former is to detect input tokens corrupted by a generator and recover their original identities from plausible candidates, while the latter is to further distinguish corruptions of a same original sequence from those of others. As such, eHealth can learn language semantics at both token and sequence levels. Extensive experiments on 11 Chinese biomedical language understanding tasks of various forms verify the effectiveness and superiority of our approach. We release the pre-trained model at https://github.com/PaddlePaddle/Research/tree/master/KG/eHealth and will also release the code later.

A long-running goal of the clinical NLP community is the extraction of important variables trapped in clinical notes. However, roadblocks have included dataset shift from the general domain and a lack of public clinical corpora and annotations. In this work, we show that large language models, such as InstructGPT, perform well at zero- and few-shot information extraction from clinical text despite not being trained specifically for the clinical domain. Whereas text classification and generation performance have already been studied extensively in such models, here we additionally demonstrate how to leverage them to tackle a diverse set of NLP tasks which require more structured outputs, including span identification, token-level sequence classification, and relation extraction. Further, due to the dearth of available data to evaluate these systems, we introduce new datasets for benchmarking few-shot clinical information extraction based on a manual re-annotation of the CASI dataset for new tasks. On the clinical extraction tasks we studied, the GPT-3 systems significantly outperform existing zero- and few-shot baselines.

With the advancements in open-source models, training (or finetuning) models on custom datasets has become a crucial part of developing solutions which are tailored to specific industrial or open-source applications. Yet, there is no single tool which simplifies the process of training across different types of modalities or tasks. We introduce AutoTrain (aka AutoTrain Advanced) -- an open-source, no code tool/library which can be used to train (or finetune) models for different kinds of tasks such as: large language model (LLM) finetuning, text classification/regression, token classification, sequence-to-sequence task, finetuning of sentence transformers, visual language model (VLM) finetuning, image classification/regression and even classification and regression tasks on tabular data. AutoTrain Advanced is an open-source library providing best practices for training models on custom datasets. The library is available at https://github.com/huggingface/autotrain-advanced. AutoTrain can be used in fully local mode or on cloud machines and works with tens of thousands of models shared on Hugging Face Hub and their variations.

The dominant text generation models compose the output by sequentially selecting words from a fixed vocabulary. In this paper, we formulate text generation as progressively copying text segments (e.g., words or phrases) from an existing text collection. We compute the contextualized representations of meaningful text segments and index them using efficient vector search toolkits. The task of text generation is then decomposed into a series of copy-and-paste operations: at each time step, we seek suitable text spans from the text collection rather than selecting from a standalone vocabulary. Experiments on the standard language modeling benchmark (WikiText-103) show that our approach achieves better generation quality according to both automatic and human evaluations. Besides, its inference efficiency is comparable to token-level autoregressive models thanks to the reduction of decoding steps. We also show that our approach allows for effective domain adaptation by simply switching to domain-specific text collection without extra training. Finally, we observe that our approach attains additional performance gains by simply scaling up to larger text collections, again without further training.Our source codes are publicly available at \url{https://github.com/gmftbyGMFTBY/Copyisallyouneed.}

Frontier LLMs are increasingly utilised across academia, society and industry. A commonly used unit for comparing models, their inputs and outputs, and estimating inference pricing is the token. In general, tokens are used as a stable currency, assumed to be broadly consistent across tokenizers and contexts, enabling direct comparisons. However, tokenization varies significantly across models and domains of text, making naive interpretation of token counts problematic. We quantify this variation by providing a comprehensive empirical analysis of tokenization, exploring the compression of sequences to tokens across different distributions of textual data. Our analysis challenges commonly held heuristics about token lengths, finding them to be overly simplistic. We hope the insights of our study add clarity and intuition toward tokenization in contemporary LLMs.

In this article we describe an efficient approach to guiding language model text generation with regular expressions and context-free grammars. Our approach adds little to no overhead to the token sequence generation process, and makes guided generation feasible in practice. An implementation is provided in the open source Python library Outlines.

Embedding text sequences is a widespread requirement in modern language understanding. Existing approaches focus largely on constant-size representations. This is problematic, as the amount of information contained in text often varies with the length of the input. We propose a solution called Nugget, which encodes language into a representation based on a dynamically selected subset of input tokens. These nuggets are learned through tasks like autoencoding and machine translation, and intuitively segment language into meaningful units. We demonstrate Nugget outperforms related approaches in tasks involving semantic comparison. Finally, we illustrate these compact units allow for expanding the contextual window of a language model (LM), suggesting new future LMs that can condition on significantly larger amounts of content.

This paper introduces Interleaved Speech-Text Language Model (IST-LM) for streaming zero-shot Text-to-Speech (TTS). Unlike many previous approaches, IST-LM is directly trained on interleaved sequences of text and speech tokens with a fixed ratio, eliminating the need for additional efforts in duration prediction and grapheme-to-phoneme alignment. The ratio of text chunk size to speech chunk size is crucial for the performance of IST-LM. To explore this, we conducted a comprehensive series of statistical analyses on the training data and performed correlation analysis with the final performance, uncovering several key factors: 1) the distance between speech tokens and their corresponding text tokens, 2) the number of future text tokens accessible to each speech token, and 3) the frequency of speech tokens precedes their corresponding text tokens. Experimental results demonstrate how to achieve an optimal streaming TTS system without complicated engineering optimization, which has a limited gap with the non-streaming system. IST-LM is conceptually simple and empirically powerful, paving the way for streaming TTS with minimal overhead while largely maintaining performance, showcasing broad prospects coupled with real-time text stream from LLMs.

This paper introduces an all-neural text formatting (TF) model designed for commercial automatic speech recognition (ASR) systems, encompassing punctuation restoration (PR), truecasing, and inverse text normalization (ITN). Unlike traditional rule-based or hybrid approaches, this method leverages a two-stage neural architecture comprising a multi-objective token classifier and a sequence-to-sequence (seq2seq) model. This design minimizes computational costs and reduces hallucinations while ensuring flexibility and robustness across diverse linguistic entities and text domains. Developed as part of the Universal-2 ASR system, the proposed method demonstrates superior performance in TF accuracy, computational efficiency, and perceptual quality, as validated through comprehensive evaluations using both objective and subjective methods. This work underscores the importance of holistic TF models in enhancing ASR usability in practical settings.

This paper describes a system designed to distinguish between AI-generated and human-written scientific excerpts in the DAGPap24 competition hosted within the Fourth Workshop on Scientific Document Processing. In this competition the task is to find artificially generated token-level text fragments in documents of a scientific domain. Our work focuses on the use of a multi-task learning architecture with two heads. The application of this approach is justified by the specificity of the task, where class spans are continuous over several hundred characters. We considered different encoder variations to obtain a state vector for each token in the sequence, as well as a variation in splitting fragments into tokens to further feed into the input of a transform-based encoder. This approach allows us to achieve a 9% quality improvement relative to the baseline solution score on the development set (from 0.86 to 0.95) using the average macro F1-score, as well as a score of 0.96 on a closed test part of the dataset from the competition.

This work delved into the realm of automatic text generation, exploring a variety of techniques ranging from traditional deterministic approaches to more modern stochastic methods. Through analysis of greedy search, beam search, top-k sampling, top-p sampling, contrastive searching, and locally typical searching, this work has provided valuable insights into the strengths, weaknesses, and potential applications of each method. Each text-generating method is evaluated using several standard metrics and a comparative study has been made on the performance of the approaches. Finally, some future directions of research in the field of automatic text generation are also identified.

Language models can perceive visual properties of text despite receiving only sequences of tokens-we mechanistically investigate how Claude 3.5 Haiku accomplishes one such task: linebreaking in fixed-width text. We find that character counts are represented on low-dimensional curved manifolds discretized by sparse feature families, analogous to biological place cells. Accurate predictions emerge from a sequence of geometric transformations: token lengths are accumulated into character count manifolds, attention heads twist these manifolds to estimate distance to the line boundary, and the decision to break the line is enabled by arranging estimates orthogonally to create a linear decision boundary. We validate our findings through causal interventions and discover visual illusions--character sequences that hijack the counting mechanism. Our work demonstrates the rich sensory processing of early layers, the intricacy of attention algorithms, and the importance of combining feature-based and geometric views of interpretability.

Transformer-based language models, more specifically BERT-based architectures have achieved state-of-the-art performance in many downstream tasks. However, for a relatively low-resource language such as Thai, the choices of models are limited to training a BERT-based model based on a much smaller dataset or finetuning multi-lingual models, both of which yield suboptimal downstream performance. Moreover, large-scale multi-lingual pretraining does not take into account language-specific features for Thai. To overcome these limitations, we pretrain a language model based on RoBERTa-base architecture on a large, deduplicated, cleaned training set (78GB in total size), curated from diverse domains of social media posts, news articles and other publicly available datasets. We apply text processing rules that are specific to Thai most importantly preserving spaces, which are important chunk and sentence boundaries in Thai before subword tokenization. We also experiment with word-level, syllable-level and SentencePiece tokenization with a smaller dataset to explore the effects on tokenization on downstream performance. Our model wangchanberta-base-att-spm-uncased trained on the 78.5GB dataset outperforms strong baselines (NBSVM, CRF and ULMFit) and multi-lingual models (XLMR and mBERT) on both sequence classification and token classification tasks in human-annotated, mono-lingual contexts.

Diffusion models have become a cornerstone in image editing, offering flexibility with language prompts and source images. However, a key challenge is attribute leakage, where unintended modifications occur in non-target regions or within target regions due to attribute interference. Existing methods often suffer from leakage due to naive text embeddings and inadequate handling of End-of-Sequence (EOS) token embeddings. To address this, we propose ALE-Edit (Attribute-leakage-free editing), a novel framework to minimize attribute leakage with three components: (1) Object-Restricted Embeddings (ORE) to localize object-specific attributes in text embeddings, (2) Region-Guided Blending for Cross-Attention Masking (RGB-CAM) to align attention with target regions, and (3) Background Blending (BB) to preserve non-edited regions. Additionally, we introduce ALE-Bench, a benchmark for evaluating attribute leakage with new metrics for target-external and target-internal leakage. Experiments demonstrate that our framework significantly reduces attribute leakage while maintaining high editing quality, providing an efficient and tuning-free solution for multi-object image editing.

Language models typically tokenize text into subwords, using a deterministic, hand-engineered heuristic of combining characters into longer surface-level strings such as 'ing' or whole words. Recent literature has repeatedly shown the limitations of such a tokenization strategy, particularly for documents not written in English and for representing numbers. On the other extreme, byte/character-level language models are much less restricted but suffer from increased sequence description lengths and a subsequent quadratic expansion in self-attention computation. Recent attempts to compress and limit these context lengths with fixed size convolutions is helpful but completely ignores the word boundary. This paper considers an alternative 'learn your tokens' scheme which utilizes the word boundary to pool bytes/characters into word representations, which are fed to the primary language model, before again decoding individual characters/bytes per word in parallel. We find that our moderately expressive and moderately fast end-to-end tokenizer outperform by over 300% both subwords and byte/character models over the intrinsic language modeling metric of next-word prediction across datasets. It particularly outshines on rare words, outperforming by a factor of 30! We extensively study the language modeling setup for all three categories of tokenizers and theoretically analyze how our end-to-end models can also be a strong trade-off in efficiency and robustness.

Generative models, widely utilized in various applications, can often struggle with prompts corresponding to partial tokens. This struggle stems from tokenization, where partial tokens fall out of distribution during inference, leading to incorrect or nonsensical outputs. This paper examines a technique to alleviate the tokenization artifact on text completion in generative models, maintaining performance even in regular non-subword cases. The method, termed token alignment, involves backtracking to the last complete tokens and ensuring the model's generation aligns with the prompt. This approach showcases marked improvement across many partial token scenarios, including nuanced cases like space-prefix and partial indentation, with only a minor time increase. The technique and analysis detailed in this paper contribute to the continuous advancement of generative models in handling partial inputs, bearing relevance for applications like code completion and text autocompletion.

As text generation has become a core capability of modern Large Language Models (LLMs), it underpins a wide range of downstream applications. However, most existing LLMs rely on autoregressive (AR) generation, producing one token at a time based on previously generated context-resulting in limited generation speed due to the inherently sequential nature of the process. To address this challenge, an increasing number of researchers have begun exploring parallel text generation-a broad class of techniques aimed at breaking the token-by-token generation bottleneck and improving inference efficiency. Despite growing interest, there remains a lack of comprehensive analysis on what specific techniques constitute parallel text generation and how they improve inference performance. To bridge this gap, we present a systematic survey of parallel text generation methods. We categorize existing approaches into AR-based and Non-AR-based paradigms, and provide a detailed examination of the core techniques within each category. Following this taxonomy, we assess their theoretical trade-offs in terms of speed, quality, and efficiency, and examine their potential for combination and comparison with alternative acceleration strategies. Finally, based on our findings, we highlight recent advancements, identify open challenges, and outline promising directions for future research in parallel text generation. We have also created a GitHub repository for indexing relevant papers and open resources available at https://github.com/zhanglingzhe0820/Awesome-Parallel-Text-Generation.

Despite the widespread use of Transformer-based text embedding models in NLP tasks, surprising 'sticky tokens' can undermine the reliability of embeddings. These tokens, when repeatedly inserted into sentences, pull sentence similarity toward a certain value, disrupting the normal distribution of embedding distances and degrading downstream performance. In this paper, we systematically investigate such anomalous tokens, formally defining them and introducing an efficient detection method, Sticky Token Detector (STD), based on sentence and token filtering. Applying STD to 40 checkpoints across 14 model families, we discover a total of 868 sticky tokens. Our analysis reveals that these tokens often originate from special or unused entries in the vocabulary, as well as fragmented subwords from multilingual corpora. Notably, their presence does not strictly correlate with model size or vocabulary size. We further evaluate how sticky tokens affect downstream tasks like clustering and retrieval, observing significant performance drops of up to 50%. Through attention-layer analysis, we show that sticky tokens disproportionately dominate the model's internal representations, raising concerns about tokenization robustness. Our findings show the need for better tokenization strategies and model design to mitigate the impact of sticky tokens in future text embedding applications.

Large language models (LLMs) have become the cornerstone of modern AI. However, the existing paradigm of next-token prediction fundamentally limits their ability to form coherent, high-level concepts, making it a critical barrier to human-like understanding and reasoning. Take the phrase "ribonucleic acid" as an example: an LLM will first decompose it into tokens, i.e., artificial text fragments ("rib", "on", ...), then learn each token sequentially, rather than grasping the phrase as a unified, coherent semantic entity. This fragmented representation hinders deeper conceptual understanding and, ultimately, the development of truly intelligent systems. In response, we introduce Concept-Aware Fine-Tuning (CAFT), a novel multi-token training method that redefines how LLMs are fine-tuned. By enabling the learning of sequences that span multiple tokens, this method fosters stronger concept-aware learning. Our experiments demonstrate significant improvements compared to conventional next-token finetuning methods across diverse tasks, including traditional applications like text summarization and domain-specific ones like de novo protein design. Multi-token prediction was previously only possible in the prohibitively expensive pretraining phase; CAFT, to our knowledge, is the first to bring the multi-token setting to the post-training phase, thus effectively democratizing its benefits for the broader community of practitioners and researchers. Finally, the unexpected effectiveness of our proposed method suggests wider implications for the machine learning research community. All code and data are available at https://github.com/michaelchen-lab/caft-llm

What are the units of text that we want to model? From bytes to multi-word expressions, text can be analyzed and generated at many granularities. Until recently, most natural language processing (NLP) models operated over words, treating those as discrete and atomic tokens, but starting with byte-pair encoding (BPE), subword-based approaches have become dominant in many areas, enabling small vocabularies while still allowing for fast inference. Is the end of the road character-level model or byte-level processing? In this survey, we connect several lines of work from the pre-neural and neural era, by showing how hybrid approaches of words and characters as well as subword-based approaches based on learned segmentation have been proposed and evaluated. We conclude that there is and likely will never be a silver bullet singular solution for all applications and that thinking seriously about tokenization remains important for many applications.

Recent approaches based on artificial neural networks (ANNs) have shown promising results for short-text classification. However, many short texts occur in sequences (e.g., sentences in a document or utterances in a dialog), and most existing ANN-based systems do not leverage the preceding short texts when classifying a subsequent one. In this work, we present a model based on recurrent neural networks and convolutional neural networks that incorporates the preceding short texts. Our model achieves state-of-the-art results on three different datasets for dialog act prediction.

Current state-of-the-art models for natural language understanding require a preprocessing step to convert raw text into discrete tokens. This process known as tokenization relies on a pre-built vocabulary of words or sub-word morphemes. This fixed vocabulary limits the model's robustness to spelling errors and its capacity to adapt to new domains. In this work, we introduce a novel open-vocabulary language model that adopts a hierarchical two-level approach: one at the word level and another at the sequence level. Concretely, we design an intra-word module that uses a shallow Transformer architecture to learn word representations from their characters, and a deep inter-word Transformer module that contextualizes each word representation by attending to the entire word sequence. Our model thus directly operates on character sequences with explicit awareness of word boundaries, but without biased sub-word or word-level vocabulary. Experiments on various downstream tasks show that our method outperforms strong baselines. We also demonstrate that our hierarchical model is robust to textual corruption and domain shift.

As the context limits of Large Language Models (LLMs) increase, the range of possible applications and downstream functions broadens. In many real-world tasks, decisions depend on details scattered across collections of often disparate documents containing mostly irrelevant information. Long-context LLMs appear well-suited to this form of complex information retrieval and reasoning, which has traditionally proven costly and time-consuming. However, although the development of longer context models has seen rapid gains in recent years, our understanding of how effectively LLMs use their context has not kept pace. To address this, we conduct a set of retrieval experiments designed to evaluate the capabilities of 17 leading LLMs, such as their ability to follow threads of information through the context window. Strikingly, we find that many models are remarkably threadsafe: capable of simultaneously following multiple threads without significant loss in performance. Still, for many models, we find the effective context limit is significantly shorter than the supported context length, with accuracy decreasing as the context window grows. Our study also highlights the important point that token counts from different tokenizers should not be directly compared -- they often correspond to substantially different numbers of written characters. We release our code and long-context experimental data.

Large Language Models have proven highly successful at modelling a variety of tasks. However, this comes at a steep computational cost that hinders wider industrial uptake. In this pa005 per, we present MWT: a Multi-Word Tokenizer that goes beyond word boundaries by representing frequent multi-word expressions as single tokens. MWTs produce a more compact and efficient tokenization that yields two benefits: (1) Increase in performance due to a greater coverage of input data given a fixed sequence length and budget; (2) Faster and lighter inference due to the ability to reduce the sequence length with negligible drops in performance. Our results show that MWT is more robust across shorter sequence lengths, thus allowing for major speedups via early sequence truncation.

This paper describes our submission to CoNLL 2018 UD Shared Task. We have extended an LSTM-based neural network designed for sequence tagging to additionally generate character-level sequences. The network was jointly trained to produce lemmas, part-of-speech tags and morphological features. Sentence segmentation, tokenization and dependency parsing were handled by UDPipe 1.2 baseline. The results demonstrate the viability of the proposed multitask architecture, although its performance still remains far from state-of-the-art.

Diffusion models have achieved state-of-the-art performance in generating images, audio, and video, but their adaptation to text remains challenging due to its discrete nature. Prior approaches either apply Gaussian diffusion in continuous latent spaces, which inherits semantic structure but struggles with token decoding, or operate in categorical simplex space, which respect discreteness but disregard semantic relation between tokens. In this paper, we propose Smoothing Diffusion on Token Embeddings (Smoothie), a novel diffusion method that combines the strengths of both approaches by progressively smoothing token embeddings based on semantic similarity. This technique enables gradual information removal while maintaining a natural decoding process. Experimental results on several sequence-to-sequence generation tasks demonstrate that Smoothie outperforms existing diffusion-based models in generation quality. Furthermore, ablation studies show that our proposed diffusion space yields better performance than both the standard embedding space and the categorical simplex. Our code is available at https://github.com/ashaba1in/smoothie.

Context-aware STR methods typically use internal autoregressive (AR) language models (LM). Inherent limitations of AR models motivated two-stage methods which employ an external LM. The conditional independence of the external LM on the input image may cause it to erroneously rectify correct predictions, leading to significant inefficiencies. Our method, PARSeq, learns an ensemble of internal AR LMs with shared weights using Permutation Language Modeling. It unifies context-free non-AR and context-aware AR inference, and iterative refinement using bidirectional context. Using synthetic training data, PARSeq achieves state-of-the-art (SOTA) results in STR benchmarks (91.9% accuracy) and more challenging datasets. It establishes new SOTA results (96.0% accuracy) when trained on real data. PARSeq is optimal on accuracy vs parameter count, FLOPS, and latency because of its simple, unified structure and parallel token processing. Due to its extensive use of attention, it is robust on arbitrarily-oriented text which is common in real-world images. Code, pretrained weights, and data are available at: https://github.com/baudm/parseq.

Neural text generation models are typically trained by maximizing log-likelihood with the sequence cross entropy (CE) loss, which encourages an exact token-by-token match between a target sequence with a generated sequence. Such training objective is sub-optimal when the target sequence is not perfect, e.g., when the target sequence is corrupted with noises, or when only weak sequence supervision is available. To address the challenge, we propose a novel Edit-Invariant Sequence Loss (EISL), which computes the matching loss of a target n-gram with all n-grams in the generated sequence. EISL is designed to be robust to various noises and edits in the target sequences. Moreover, the EISL computation is essentially an approximate convolution operation with target n-grams as kernels, which is easy to implement and efficient to compute with existing libraries. To demonstrate the effectiveness of EISL, we conduct experiments on a wide range of tasks, including machine translation with noisy target sequences, unsupervised text style transfer with only weak training signals, and non-autoregressive generation with non-predefined generation order. Experimental results show our method significantly outperforms the common CE loss and other strong baselines on all the tasks. EISL has a simple API that can be used as a drop-in replacement of the CE loss: https://github.com/guangyliu/EISL.

We propose a novel text-to-speech (TTS) framework centered around a neural transducer. Our approach divides the whole TTS pipeline into semantic-level sequence-to-sequence (seq2seq) modeling and fine-grained acoustic modeling stages, utilizing discrete semantic tokens obtained from wav2vec2.0 embeddings. For a robust and efficient alignment modeling, we employ a neural transducer named token transducer for the semantic token prediction, benefiting from its hard monotonic alignment constraints. Subsequently, a non-autoregressive (NAR) speech generator efficiently synthesizes waveforms from these semantic tokens. Additionally, a reference speech controls temporal dynamics and acoustic conditions at each stage. This decoupled framework reduces the training complexity of TTS while allowing each stage to focus on semantic and acoustic modeling. Our experimental results on zero-shot adaptive TTS demonstrate that our model surpasses the baseline in terms of speech quality and speaker similarity, both objectively and subjectively. We also delve into the inference speed and prosody control capabilities of our approach, highlighting the potential of neural transducers in TTS frameworks.

Token-based text-to-speech (TTS) models have emerged as a promising avenue for generating natural and realistic speech, yet they grapple with low pronunciation accuracy, speaking style and timbre inconsistency, and a substantial need for diverse training data. In response, we introduce a novel hierarchical acoustic modeling approach complemented by a tailored data augmentation strategy and train it on the combination of real and synthetic data, scaling the data size up to 650k hours, leading to the zero-shot TTS model with 0.8B parameters. Specifically, our method incorporates a latent variable sequence containing supplementary acoustic information based on refined self-supervised learning (SSL) discrete units into the TTS model by a predictor. This significantly mitigates pronunciation errors and style mutations in synthesized speech. During training, we strategically replace and duplicate segments of the data to enhance timbre uniformity. Moreover, a pretrained few-shot voice conversion model is utilized to generate a plethora of voices with identical content yet varied timbres. This facilitates the explicit learning of utterance-level one-to-many mappings, enriching speech diversity and also ensuring consistency in timbre. Comparative experiments (Demo page: https://anonymous.4open.science/w/ham-tts/)demonstrate our model's superiority over VALL-E in pronunciation precision and maintaining speaking style, as well as timbre continuity.

Effective training of today's large language models (LLMs) depends on large batches and long sequences for throughput and accuracy. To handle variable-length sequences on hardware accelerators, it is common practice to introduce padding tokens, so that all sequences in a batch have the same length. We show in this paper that the variation in sequence lengths in common NLP datasets is such that up to 50% of all tokens can be padding. In less common, but not extreme, cases (e.g. GLUE-cola with sequence length 128), the ratio is up to 89%. Existing methods to address the resulting inefficiency are complicated by the need to avoid cross-contamination in self-attention, by a reduction in accuracy when sequence ordering information is lost, or by customized kernel implementations only valid for specific accelerators. This paper introduces a new formalization of sequence packing in the context of the well-studied bin packing problem, and presents new algorithms based on this formulation which, for example, confer a 2x speedup for phase 2 pre-training in BERT. We show how existing models can be adapted to ensure mathematical equivalence between the original and packed models, meaning that packed models can be trained with existing pre-training and fine-tuning practices.

We present the KL3M tokenizers, a family of specialized tokenizers for legal, financial, and governmental text. Despite established work on tokenization, specialized tokenizers for professional domains remain understudied. Our paper offers two main contributions to this area. First, we introduce domain-specific BPE tokenizers for legal, financial, and governmental text. Our kl3m-004-128k-cased tokenizer uses 9-17% fewer tokens than GPT-4o and Llama3 for domain-specific documents, despite having a smaller vocabulary. For specialized terminology, our cased tokenizer is even more efficient, using up to 83% fewer tokens for legal terms and 39% fewer tokens for financial terms. Second, we develop character-level BPE tokenizers (4K, 8K, and 16K vocabulary sizes) for text correction tasks like OCR post-processing. These tokenizers keep consistent token boundaries between error-containing and correct text, making it easier for models to learn correction patterns. These tokenizers help professional applications by fitting more text in context windows, reducing computational needs, and preserving the meaning of domain-specific terms. Our analysis shows these efficiency gains directly benefit the processing of long legal and financial documents. We release all tokenizers and code through GitHub and Hugging Face to support further research in specialized tokenization.

Long sequences of text are challenging in the context of transformers, due to quadratic memory increase in the self-attention mechanism. As this issue directly affects the translation from natural language to SQL queries (as techniques usually take as input a concatenated text with the question and the database schema), we present techniques that allow long text sequences to be handled by transformers with up to 512 input tokens. We propose a training process with database schema pruning (removal of tables and columns names that are useless for the query of interest). In addition, we used a multilingual approach with the mT5-large model fine-tuned with a data-augmented Spider dataset in four languages simultaneously: English, Portuguese, Spanish, and French. Our proposed technique used the Spider dataset and increased the exact set match accuracy results from 0.718 to 0.736 in a validation dataset (Dev). Source code, evaluations, and checkpoints are available at: https://github.com/C4AI/gap-text2sql.

This paper presents LLM4ES, a novel framework that exploits large pre-trained language models (LLMs) to derive user embeddings from event sequences. Event sequences are transformed into a textual representation, which is subsequently used to fine-tune an LLM through next-token prediction to generate high-quality embeddings. We introduce a text enrichment technique that enhances LLM adaptation to event sequence data, improving representation quality for low-variability domains. Experimental results demonstrate that LLM4ES achieves state-of-the-art performance in user classification tasks in financial and other domains, outperforming existing embedding methods. The resulting user embeddings can be incorporated into a wide range of applications, from user segmentation in finance to patient outcome prediction in healthcare.

Recent years have seen remarkable progress of text generation in different contexts, such as the most common setting of generating text from scratch, and the emerging paradigm of retrieval-and-rewriting. Text infilling, which fills missing text portions of a sentence or paragraph, is also of numerous use in real life, yet is under-explored. Previous work has focused on restricted settings by either assuming single word per missing portion or limiting to a single missing portion to the end of the text. This paper studies the general task of text infilling, where the input text can have an arbitrary number of portions to be filled, each of which may require an arbitrary unknown number of tokens. We study various approaches for the task, including a self-attention model with segment-aware position encoding and bidirectional context modeling. We create extensive supervised data by masking out text with varying strategies. Experiments show the self-attention model greatly outperforms others, creating a strong baseline for future research.

Existing large language model (LLM)-based embeddings typically adopt an encoder-only paradigm, treating LLMs as static feature extractors and overlooking their core generative strengths. We introduce GIRCSE (Generative Iterative Refinement for Contrastive Sentence Embeddings), a novel framework that leverages autoregressive generation to iteratively refine semantic representations. By producing sequences of soft tokens optimized under contrastive objective, GIRCSE captures latent concepts and implicit semantics that encoder-only methods often miss. To guide this process, we propose an Iterative Contrastive Refinement (ICR) objective that encourages each refinement step to yield better representations. Extensive experiments show that GIRCSE outperforms strong LLM-based embedding baselines on the MTEB benchmark and instruction-following tasks. Moreover, GIRCSE exhibits an emergent test-time scaling property: generating more tokens at inference steadily improves embedding quality. Our results establish generative iterative refinement as a new paradigm for representation learning.

Large pretrained language models (LLMs) can be rapidly adapted to a wide variety of tasks via a text-to-text approach, where the instruction and input are fed to the model in natural language. Combined with in-context learning (ICL), this paradigm is impressively flexible and powerful. However, it also burdens users with an overwhelming number of choices, many of them arbitrary. Inspired by markup languages like HTML, we contribute a method of using soft-token tags to compose prompt templates. This approach reduces arbitrary decisions and streamlines the application of ICL. Our method is a form of meta-learning for ICL; it learns these tags in advance during a parameter-efficient fine-tuning ``warm-up'' process. The tags can subsequently be used in templates for ICL on new, unseen tasks without any additional fine-tuning. Our experiments with this approach yield promising initial results, improving LLM performance on important enterprise applications such as few-shot and open-world intent detection, as well as text classification in news and legal domains.

Recent advances in multimodal pre-trained models have significantly improved information extraction from visually-rich documents (VrDs), in which named entity recognition (NER) is treated as a sequence-labeling task of predicting the BIO entity tags for tokens, following the typical setting of NLP. However, BIO-tagging scheme relies on the correct order of model inputs, which is not guaranteed in real-world NER on scanned VrDs where text are recognized and arranged by OCR systems. Such reading order issue hinders the accurate marking of entities by BIO-tagging scheme, making it impossible for sequence-labeling methods to predict correct named entities. To address the reading order issue, we introduce Token Path Prediction (TPP), a simple prediction head to predict entity mentions as token sequences within documents. Alternative to token classification, TPP models the document layout as a complete directed graph of tokens, and predicts token paths within the graph as entities. For better evaluation of VrD-NER systems, we also propose two revised benchmark datasets of NER on scanned documents which can reflect real-world scenarios. Experiment results demonstrate the effectiveness of our method, and suggest its potential to be a universal solution to various information extraction tasks on documents.

We introduce SPARse Fine-grained Contrastive Alignment (SPARC), a simple method for pretraining more fine-grained multimodal representations from image-text pairs. Given that multiple image patches often correspond to single words, we propose to learn a grouping of image patches for every token in the caption. To achieve this, we use a sparse similarity metric between image patches and language tokens and compute for each token a language-grouped vision embedding as the weighted average of patches. The token and language-grouped vision embeddings are then contrasted through a fine-grained sequence-wise loss that only depends on individual samples and does not require other batch samples as negatives. This enables more detailed information to be learned in a computationally inexpensive manner. SPARC combines this fine-grained loss with a contrastive loss between global image and text embeddings to learn representations that simultaneously encode global and local information. We thoroughly evaluate our proposed method and show improved performance over competing approaches both on image-level tasks relying on coarse-grained information, e.g. classification, as well as region-level tasks relying on fine-grained information, e.g. retrieval, object detection, and segmentation. Moreover, SPARC improves model faithfulness and captioning in foundational vision-language models.

Large-language-model (LLM)-based text-to-speech (TTS) systems can generate natural speech, but most are not designed for low-latency dual-streaming synthesis. High-quality dual-streaming TTS depends on accurate text--speech alignment and well-designed training sequences that balance synthesis quality and latency. Prior work often relies on GMM-HMM based forced-alignment toolkits (e.g., MFA), which are pipeline-heavy and less flexible than neural aligners; fixed-ratio interleaving of text and speech tokens struggles to capture text--speech alignment regularities. We propose CTC-TTS, which replaces MFA with a CTC based aligner and introduces a bi-word based interleaving strategy. Two variants are designed: CTC-TTS-L (token concatenation along the sequence length) for higher quality and CTC-TTS-F (embedding stacking along the feature dimension) for lower latency. Experiments show that CTC-TTS outperforms fixed-ratio interleaving and MFA-based baselines on streaming synthesis and zero-shot tasks. Speech samples are available at https://ctctts.github.io/.

We propose a general and efficient framework to control auto-regressive generation models with NeurAlly-Decomposed Oracle (NADO). Given a pre-trained base language model and a sequence-level boolean oracle function, we propose to decompose the oracle function into token-level guidance to steer the base model in text generation. Specifically, the token-level guidance is approximated by a neural model trained with examples sampled from the base model, demanding no additional auxiliary labeled data. Based on posterior regularization, we present the closed-form optimal solution to incorporate the token-level guidance into the base model for controllable generation. We further provide a theoretical analysis of how the approximation quality of NADO affects the controllable generation results. Experiments conducted on two applications: (1) text generation with lexical constraints and (2) machine translation with formality control demonstrate that our framework efficiently guides the base model towards the given oracle while maintaining high generation quality.

This paper explores the elusive mechanism underpinning in-context learning in Large Language Models (LLMs). Our work provides a novel perspective by examining in-context learning via the lens of surface repetitions. We quantitatively investigate the role of surface features in text generation, and empirically establish the existence of token co-occurrence reinforcement, a principle that strengthens the relationship between two tokens based on their contextual co-occurrences. By investigating the dual impacts of these features, our research illuminates the internal workings of in-context learning and expounds on the reasons for its failures. This paper provides an essential contribution to the understanding of in-context learning and its potential limitations, providing a fresh perspective on this exciting capability.

Multimodal interleaved datasets featuring free-form interleaved sequences of images and text are crucial for training frontier large multimodal models (LMMs). Despite the rapid progression of open-source LMMs, there remains a pronounced scarcity of large-scale, diverse open-source multimodal interleaved datasets. In response, we introduce MINT-1T, the most extensive and diverse open-source Multimodal INTerleaved dataset to date. MINT-1T comprises one trillion text tokens and three billion images, a 10x scale-up from existing open-source datasets. Additionally, we include previously untapped sources such as PDFs and ArXiv papers. As scaling multimodal interleaved datasets requires substantial engineering effort, sharing the data curation process and releasing the dataset greatly benefits the community. Our experiments show that LMMs trained on MINT-1T rival the performance of models trained on the previous leading dataset, OBELICS. Our data and code will be released at https://github.com/mlfoundations/MINT-1T.

Diffusion language models (DLMs) generate text through iterative denoising, but inference requires full-sequence attention at every iteration, resulting in substantial redundant computation on masked tokens. Block-wise diffusion can reduce this cost, yet it typically relies on retraining and constrained update orders, limiting its direct applicability to pretrained DLMs. Our token-level analysis reveals pronounced structural locality in DLM inference. Decoding is driven by a small set of prefix-localized active tokens; the influence of distant undecoded context diminishes rapidly, and decoded tokens exhibit stage-wise temporal stability, enabling reuse of intermediate representations except for a brief post-decode transient. Motivated by these observations, we propose \placeholderThe source code is available at https://github.com/vhicrgit/Window-Diffusion., a window-based token pruning and caching method for inference. We maintain a local computation window that slides rightward as denoising progresses, and partition undecoded tokens into: (i) active tokens that are computed online, (ii) buffer tokens whose KV states are cached and periodically refreshed, and (iii) far-field tokens that are pruned outside the window. Computation is restricted to active and buffer tokens within the window, while far-field tokens are omitted at each stage. Experiments on LLaDA and Dream show that, under matched compute budgets, our method achieves up to 99times inference speedup while largely preserving generation performance.

Large language models pay a well-documented tax on non-English text: the same content costs several times more tokens, and because attention is quadratic in sequence length, far more compute. We ask how much of this tax is removable. Framing the token layer as source coding -- transformer compute is monotone in sequence length, whose per-atom floor is the Shannon rate H/log_2 V, an object already applied to tokenizers in prior work -- we assemble a token-cost ledger that splits each language's cost, at fixed parallel content, into a removable coding redundancy, a residual coding slack, an intrinsic-content term, and an orthogonal, irreducible grapheme-to-phoneme term that governs the multimodal rather than the text cost. On FLORES-200 across eight languages, a production tokenizer costs up to 8.9times more tokens for Indic scripts than for English; a script-matched code trained on 1,012 sentences removes a median 64% of that excess (bootstrap 95\% CI [0.638, 0.647]), and a script-fair information floor shows the intrinsic content differs by under 6% -- the tax is representational, not informational. A constructed code removes 98% of a controlled source's redundancy, and the token tax implies up to 79times attention cost. We are explicit about scope and failure: this is compute-and-memory accounting, not a model-quality claim; we neither measure nor claim the cross-lingual direction of the orthographic term; and our matched code is a conservative small-data demonstration. We contribute the unifying ledger, the removable-versus-intrinsic attribution, and an open one-command harness.

We introduce VoiceCraft, a token infilling neural codec language model, that achieves state-of-the-art performance on both speech editing and zero-shot text-to-speech (TTS) on audiobooks, internet videos, and podcasts. VoiceCraft employs a Transformer decoder architecture and introduces a token rearrangement procedure that combines causal masking and delayed stacking to enable generation within an existing sequence. On speech editing tasks, VoiceCraft produces edited speech that is nearly indistinguishable from unedited recordings in terms of naturalness, as evaluated by humans; for zero-shot TTS, our model outperforms prior SotA models including VALLE and the popular commercial model XTTS-v2. Crucially, the models are evaluated on challenging and realistic datasets, that consist of diverse accents, speaking styles, recording conditions, and background noise and music, and our model performs consistently well compared to other models and real recordings. In particular, for speech editing evaluation, we introduce a high quality, challenging, and realistic dataset named RealEdit. We encourage readers to listen to the demos at https://jasonppy.github.io/VoiceCraft_web.