Daily Papers

Large language model agents are becoming operational interfaces to files, memories, registries, and external tools. This deployment shift creates a new skill revocation problem: after a skill is removed from an explicit registry, an agent may still reconstruct it from residual carriers such as archives, transcripts, schemas, or memory entries. We study this problem as operational skill unlearning, where the goal is not parameter-level forgetting, but preventing a deployed agent from rebuilding a revoked skill through primitive tools. We introduce OBLIVION, a controlled benchmark and defense harness for revoked-skill resurrection. OBLIVION models each episode as a source-to-sink workflow, applies Cross-Surface Coherent Erasure to reduce residual carriers, and uses frozen workflow remediation near dangerous sinks. On the locked 88 attack episodes, the no-defense arm reaches formal attack success rate 1.0. OBLIVION reduces the rate to 0.114 and impact-weighted exposure to 0.115 while keeping locked utility at 1.0 and benign block rate at 0. In a separate skill-attack-derived sandbox, OBLIVION reduces attack success from 1.0 to 0.2 and impact-weighted exposure from 1.0 to 0.213 while preserving all utility controls. These results support workflow-level evaluation beyond checking explicit skill entries.

Large language models (LLMs) increasingly construct multi-agent workflows that decompose a complex task and assign specialist agents from a pool. However, building such a workflow well remains challenging: how finely to divide the task, which agent to trust with each subtask, and when to create a new specialist are all critical decisions a workflow constructor needs to settle up front. Thus, whether each subtask succeeds remains unknown until the workflow runs. Yet, improving a workflow is costly. Locating a fault usually requires a reference answer, a graded outcome, or a trained assessor, and the fix is applied to the whole workflow through re-execution, re-search, or retraining. We propose InFlowOp, which prices every decision in one label-free cost that weighs how well an agent's competence meets what a subtask demands against how much that agent takes to run. Before execution, InFlowOp bidirectionally determines the granularity of task decomposition and agent assignment following from the cost rather than from a fixed template. During execution, InFlowOp corrects a fault with the cheapest move via the same cost that serves the workflow both as it is built and as it runs. Facing the workflow-level evaluation challenge, we introduce Braid, a benchmark whose tasks require multi-agent coordination beyond single-agent capability. Across various domains and backbones, InFlowOp outperforms single agent baselines by up to +11.97%, achieving +9.64% with in-flow optimization. Our project page: https://xhguo7.github.io/InFlowOp/.

Tool-augmented LLM agents increasingly rely on multi-step, multi-tool workflows to complete real tasks. This design expands the attack surface, because data produced by one tool can be persisted and later reused as input to another tool, enabling exploitable source-to-sink dataflows that only emerge through tool composition. We study this risk as multi-tool vulnerabilities in LLM agents, and show that existing discovery efforts focused on single-tool or single-hop testing miss these long-horizon behaviors and provide limited debugging value. We present ChainFuzzer, a greybox framework for discovering and reproducing multi-tool vulnerabilities with auditable evidence. ChainFuzzer (i) identifies high-impact operations with strict source-to-sink dataflow evidence and extracts plausible upstream candidate tool chains based on cross-tool dependencies, (ii) uses Trace-guided Prompt Solving (TPS) to synthesize stable prompts that reliably drive the agent to execute target chains, and (iii) performs guardrail-aware fuzzing to reproduce vulnerabilities under LLM guardrails via payload mutation and sink-specific oracles. We evaluate ChainFuzzer on 20 popular open-source LLM agent apps (998 tools). ChainFuzzer extracts 2,388 candidate tool chains and synthesizes 2,213 stable prompts, confirming 365 unique, reproducible vulnerabilities across 19/20 apps (302 require multi-tool execution). Component evaluation shows tool-chain extraction achieves 96.49% edge precision and 91.50% strict chain precision; TPS increases chain reachability from 27.05% to 95.45%; guardrail-aware fuzzing boosts payload-level trigger rate from 18.20% to 88.60%. Overall, ChainFuzzer achieves 3.02 vulnerabilities per 1M tokens, providing a practical foundation for testing and hardening real-world multi-tool agent systems.

Multi-Agent Systems (MAS) built on large language models typically solve complex tasks by coordinating multiple agents through workflows. Existing approaches generates workflows either at task level or query level, but their relative costs and benefits remain unclear. After rethinking and empirical analyses, we show that query-level workflow generation is not always necessary, since a small set of top-K best task-level workflows together already covers equivalent or even more queries. We further find that exhaustive execution-based task-level evaluation is both extremely token-costly and frequently unreliable. Inspired by the idea of self-evolution and generative reward modeling, we propose a low-cost task-level generation framework SCALE, which means \textbf{S}elf prediction of the optimizer with few shot \textbf{CAL}ibration for \textbf{E}valuation instead of full validation execution. Extensive experiments demonstrate that SCALE maintains competitive performance, with an average degradation of just 0.61\% compared to existing approach across multiple datasets, while cutting overall token usage by up to 83\%.

Customer-service LLM agents must follow organizational policy when acting on a user's behalf. Compliance failures arise from either forbidden actions, such as granting an ineligible change, or omitted procedural requirements, such as identification or confirmation. Runtime safeguards can intervene on risky actions, but action-local checks do not guide an agent through a multi-step procedure. Workflow-following systems support prescribed process execution, but primarily target workflow completion rather than safeguarding agent behavior. PolicyGuide instead compiles each domain policy into a workflow graph and invokes a proactive verifier at user-turn boundaries. From persisted graph state, the verifier reconciles open requests and returns step-specific remediation along a policy-compliant path. Across the τ^2-bench airline, retail, and telecom domains with a GPT-5.4 agent and verifier, PolicyGuide raises mean Pass^4 from 0.42 to 0.62, with the largest gain on telecom (0.19 to 0.61), the most workflow-structured domain. The same workflows transfer to Claude Sonnet 4.6 and Gemini 2.5 Pro agents. Complementary evaluations find the lowest observed attack-success rate under adversarial users and the strongest procedural compliance in an author-designed workflow-level validation.

Much previous AI research has focused on developing monolithic models to maximize their intelligence and capability, with the primary goal of enhancing performance on specific tasks. In contrast, this paper explores an alternative approach: collaborative AI systems that use workflows to integrate models, data sources, and pipelines to solve complex and diverse tasks. We introduce GenAgent, an LLM-based framework that automatically generates complex workflows, offering greater flexibility and scalability compared to monolithic models. The core innovation of GenAgent lies in representing workflows with code, alongside constructing workflows with collaborative agents in a step-by-step manner. We implement GenAgent on the ComfyUI platform and propose a new benchmark, OpenComfy. The results demonstrate that GenAgent outperforms baseline approaches in both run-level and task-level evaluations, showing its capability to generate complex workflows with superior effectiveness and stability.

The evaluation of vision-language models (VLMs) for chest X-ray (CXR) analysis has largely been limited to disease-presence classification without visual grounding. Such evaluations fail to verify the expert-level lesion perception necessary to ensure the clinical reliability of VLMs. To address these limitations, we introduce CheXpercept, a sequential, multi-level perception benchmark that mirrors a radiologist's cognitive workflow across coarse-level detection, fine-level contour evaluation and revision, and semantic-level attribute extraction. To ensure high clinical fidelity at scale, we construct the dataset using a semi-automated generation pipeline paired with a review by six medical experts. CheXpercept contains 10,400 QA items derived from 2,100 CXRs, covering seven clinically critical pulmonary and cardiac lesions. To demonstrate the current landscape of VLM perception, we benchmark 14 general and medical VLMs on CheXpercept. The models achieve adequate performance only at the coarse level, with accuracy degrading precipitously on deeper visual tasks. Notably, medical VLMs show almost no perceptual advantage over their general-domain counterparts, highlighting a systemic flaw in current domain adaptation. The code and dataset will be publicly available.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Code review is a cornerstone of software quality assurance, and recent advances in Large Language Models (LLMs) have shown promise in its automation. However, existing benchmarks for LLM-based code review face three major limitations. Lack of semantic context: most benchmarks provide only code diffs without textual information such as issue descriptions, which are crucial for understanding developer intent. Data quality issues: without rigorous validation, many samples are noisy-e.g., reviews on outdated or irrelevant code-reducing evaluation reliability. Coarse granularity: most benchmarks operate at the file or commit level, overlooking the fine-grained, line-level reasoning essential for precise review. We introduce ContextCRBench, a high-quality, context-rich benchmark for fine-grained LLM evaluation in code review. Our construction pipeline comprises: Raw Data Crawling, collecting 153.7K issues and pull requests from top-tier repositories; Comprehensive Context Extraction, linking issue-PR pairs for textual context and extracting the full surrounding function or class for code context; and Multi-stage Data Filtering, combining rule-based and LLM-based validation to remove outdated, malformed, or low-value samples, resulting in 67,910 context-enriched entries. ContextCRBench supports three evaluation scenarios aligned with the review workflow: hunk-level quality assessment, line-level defect localization, and line-level comment generation. Evaluating eight leading LLMs (four closed-source and four open-source) reveals that textual context yields greater performance gains than code context alone, while current LLMs remain far from human-level review ability. Deployed at ByteDance, ContextCRBench drives a self-evolving code review system, improving performance by 61.98% and demonstrating its robustness and industrial utility. https://github.com/kinesiatricssxilm14/ContextCRBench.

Microscopic interpretation of histopathology images underlies many important diagnostic and treatment decisions. While advances in vision-language modeling raise new opportunities for analysis of such images, the gigapixel-scale size of whole slide images (WSIs) introduces unique challenges. Additionally, pathology reports simultaneously highlight key findings from small regions while also aggregating interpretation across multiple slides, often making it difficult to create robust image-text pairs. As such, pathology reports remain a largely untapped source of supervision in computational pathology, with most efforts relying on region-of-interest annotations or self-supervision at the patch-level. In this work, we develop a vision-language model based on the BLIP-2 framework using WSIs paired with curated text from pathology reports. This enables applications utilizing a shared image-text embedding space, such as text or image retrieval for finding cases of interest, as well as integration of the WSI encoder with a frozen large language model (LLM) for WSI-based generative text capabilities such as report generation or AI-in-the-loop interactions. We utilize a de-identified dataset of over 350,000 WSIs and diagnostic text pairs, spanning a wide range of diagnoses, procedure types, and tissue types. We present pathologist evaluation of text generation and text retrieval using WSI embeddings, as well as results for WSI classification and workflow prioritization (slide-level triaging). Model-generated text for WSIs was rated by pathologists as accurate, without clinically significant error or omission, for 78% of WSIs on average. This work demonstrates exciting potential capabilities for language-aligned WSI embeddings.

Radiology is a vital and complex component of modern clinical workflow and covers many tasks. Recently, vision-language (VL) foundation models in medicine have shown potential in processing multimodal information, offering a unified solution for various radiology tasks. However, existing studies either pre-trained VL models on natural data or did not fully integrate vision-language architecture and pretraining, often neglecting the unique multimodal complexity in radiology images and their textual contexts. Additionally, their practical applicability in real-world scenarios remains underexplored. Here, we present RadFound, a large and open-source vision-language foundation model tailored for radiology, that is trained on the most extensive dataset of over 8.1 million images and 250,000 image-text pairs, covering 19 major organ systems and 10 imaging modalities. To establish expert-level multimodal perception and generation capabilities, RadFound introduces an enhanced vision encoder to capture intra-image local features and inter-image contextual information, and a unified cross-modal learning design tailored to radiology. To fully assess the models' capability, we construct a benchmark, RadVLBench, including radiology interpretation tasks like medical vision-language question-answering, as well as text generation tasks ranging from captioning to report generation. We also propose a human evaluation framework. When evaluated on the real-world benchmark involving three representative modalities, 2D images (chest X-rays), multi-view images (mammograms), and 3D images (thyroid CT scans), RadFound significantly outperforms other VL foundation models on both quantitative metrics and human evaluation. In summary, the development of RadFound represents an advancement in radiology generalists, demonstrating broad applicability potential for integration into clinical workflows.

Evaluating the writing capabilities of large language models (LLMs) remains a significant challenge due to the multidimensional nature of writing skills and the limitations of existing metrics. LLM's performance in thousand-words level and open-ended writing is inadequately assessed by traditional reference-based metrics or modern LLM-as-a-judge methods. We propose Tree-of-Writing (ToW), to resolve the implicit inconsistency often found when LLM-as-a-judge aggregates all sub-features in text evaluation. ToW incorporates a tree-structured workflow by explicitly modeling the aggregation weights of sub-features. We also present HowToBench, a large-scale Chinese writing benchmark encompassing 12 genres and 1302 instructions across three task categories: contextual completion, outline-guided writing, and open-ended generation. ToW successfully mitigates the biases, achieving a 0.93 Pearson correlation with human judgments. Furthermore, we detect that both overlap-based text generation metrics and popular LLM-as-a-judge practices are vulnerable to textual disturbances, while ToW is robust to them. We also uncover a negative correlation between input length and content-related scores in the Guide task, showcasing that it cannot be simply improved by input-side information piling.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

Large language models (LLMs) are being rapidly integrated into decision-support tools, automation workflows, and AI-enabled software systems. However, their behavior in production environments remains poorly understood, and their failure patterns differ fundamentally from those of traditional machine learning models. This paper presents a system-level taxonomy of fifteen hidden failure modes that arise in real-world LLM applications, including multi-step reasoning drift, latent inconsistency, context-boundary degradation, incorrect tool invocation, version drift, and cost-driven performance collapse. Using this taxonomy, we analyze the growing gap in evaluation and monitoring practices: existing benchmarks measure knowledge or reasoning but provide little insight into stability, reproducibility, drift, or workflow integration. We further examine the production challenges associated with deploying LLMs - including observability limitations, cost constraints, and update-induced regressions - and outline high-level design principles for building reliable, maintainable, and cost-aware LLM systems. Finally, we outline high-level design principles for building reliable, maintainable, and cost-aware LLM-based systems. By framing LLM reliability as a system-engineering problem rather than a purely model-centric one, this work provides an analytical foundation for future research on evaluation methodology, AI system robustness, and dependable LLM deployment.

Does adding more agents help an LLM workflow once compared systems share the same benchmark loader, tool access, answer contract, usage accounting, and trajectory logging? We introduce BenchAgent, an evaluation framework that places single-agent, fixed multi-agent (MAS), and evolving MAS workflows under one normalized execution and logging protocol. BenchAgent evaluates these substrate-internal workflows across ten reasoning, coding, and tool-use benchmarks with GPT-4.1, and separately reports a Protocol-Aligned External (PAE) GAIA study of a runtime-generated workflow. Under SI conditions, at most one of six tested MAS exceeds the matched single-agent anchor on benchmark-balanced average accuracy: EvoAgent lies within the Wilson one-run guidance, while the remaining five trail by 2.56-11.29 points and occupy more expensive accuracy-cost trade-offs. On the PAE GAIA snapshot, a Claude-Code-style runtime workflow reaches 66.72% overall and 69.23% on Level 3, more than 20 points above the strongest non-Claude baseline, Jarvis, a fixed MAS.

Deep research agents integrate fragmented evidence through multi-step tool use. BrowseComp offers a text-only testbed for such agents, but existing multimodal benchmarks rarely require both weak visual cues composition and BrowseComp-style multi-hop verification. Geolocation is a natural testbed because answers depend on combining multiple ambiguous visual cues and validating them with open-web evidence. Thus, we introduce GeoBrowse, a geolocation benchmark that combines visual reasoning with knowledge-intensive multi-hop queries. Level 1 tests extracting and composing fragmented visual cues, and Level 2 increases query difficulty by injecting long-tail knowledge and obfuscating key entities. To support evaluation, we provide an agentic workflow GATE with five think-with-image tools and four knowledge-intensive tools, and release expert-annotated stepwise traces grounded in verifiable evidence for trajectory-level analysis. Experiments show that GATE outperforms direct inference and open-source agents, indicating that no-tool, search-only or image-only setups are insufficient. Gains come from coherent, level-specific tool-use plans rather than more tool calls, as they more reliably reach annotated key evidence steps and make fewer errors when integrating into the final decision. The GeoBrowse bernchmark and codes are provided in https://github.com/ornamentt/GeoBrowse

Real-world enterprise text-to-SQL workflows often involve complex cloud or local data across various database systems, multiple SQL queries in various dialects, and diverse operations from data transformation to analytics. We introduce Spider 2.0, an evaluation framework comprising 632 real-world text-to-SQL workflow problems derived from enterprise-level database use cases. The databases in Spider 2.0 are sourced from real data applications, often containing over 1,000 columns and stored in local or cloud database systems such as BigQuery and Snowflake. We show that solving problems in Spider 2.0 frequently requires understanding and searching through database metadata, dialect documentation, and even project-level codebases. This challenge calls for models to interact with complex SQL workflow environments, process extremely long contexts, perform intricate reasoning, and generate multiple SQL queries with diverse operations, often exceeding 100 lines, which goes far beyond traditional text-to-SQL challenges. Our evaluations indicate that based on o1-preview, our code agent framework successfully solves only 17.0% of the tasks, compared with 91.2% on Spider 1.0 and 73.0% on BIRD. Our results on Spider 2.0 show that while language models have demonstrated remarkable performance in code generation -- especially in prior text-to-SQL benchmarks -- they require significant improvement in order to achieve adequate performance for real-world enterprise usage. Progress on Spider 2.0 represents crucial steps towards developing intelligent, autonomous, code agents for real-world enterprise settings. Our code, baseline models, and data are available at https://spider2-sql.github.io.

As LLM-based agents are deployed in complex, multi-step workflows, a critical evaluation gap has emerged: most existing benchmarks judge only final outcomes, unable to distinguish reliable reasoning from lucky success or attribute failures to specific process deficiencies, hindering attribution in long-horizon tasks. In this work, we present ClawTrack, a dual-assessment benchmark that simultaneously measures what an agent achieves (Task Score) and how it achieves it (Process Score). ClawTrack comprises 320 tasks across 8 domains with 25+ deterministic mock services. A Process Grader scores each reasoning turn along four dimensions (goal alignment, efficiency, information utilization, and result verification), anchored by 12,541 task-specific rubric items. Evaluating 21 models over 16,000+ trials, we find that: (1) process scores effectively attribute success and failure to specific reasoning dimensions, filtering lucky passes invisible to outcome-only evaluation; (2) the four dimensions are complementary, with result verification as the systematic bottleneck; (3) the framework is robust to evaluator choice across different judge LLMs; and (4) process-based trajectory filtering yields consistent post-training improvements across model scales.

The growing volume of academic papers has made it increasingly difficult for researchers to efficiently extract key information. While large language models (LLMs) based agents are capable of automating question answering (QA) workflows for scientific papers, there still lacks a comprehensive and realistic benchmark to evaluate their capabilities. Moreover, training an interactive agent for this specific task is hindered by the shortage of high-quality interaction trajectories. In this work, we propose AirQA, a human-annotated comprehensive paper QA dataset in the field of artificial intelligence (AI), with 13,948 papers and 1,246 questions, that encompasses multi-task, multi-modal and instance-level evaluation. Furthermore, we propose ExTrActor, an automated framework for instruction data synthesis. With three LLM-based agents, ExTrActor can perform example generation and trajectory collection without human intervention. Evaluations of multiple open-source and proprietary models show that most models underperform on AirQA, demonstrating the quality of our dataset. Extensive experiments confirm that ExTrActor consistently improves the multi-turn tool-use capability of small models, enabling them to achieve performance comparable to larger ones.

Spreadsheets are widely used for business analysis, financial modeling, reporting, and decision-making. However, most existing spreadsheet benchmarks evaluate isolated operations such as single-formula generation or local cell edits, and therefore fail to capture end-to-end workflows in realistic business settings. We introduce SpreadsheetBench 2, a workflow-level benchmark for spreadsheet agents that covers three task categories: generation, debugging, and visualization. The benchmark is constructed from authentic business data, including financial reports and corporate filings, and is annotated and validated by domain experts. The benchmark contains 321 tasks; each instance averages 11.8 worksheets and requires 593.5 cell modifications, reflecting large multi-sheet workbooks with cross-sheet dependencies. We evaluate eight frontier large language models under a unified multi-turn agent scaffold, and additionally include several LLM-based spreadsheet products as complementary baselines. Results show that current systems remain far from reliable on real-world workflows: the best model achieves 34.89\% overall task accuracy, and debugging accuracy is as low as 12.00\%. Trajectory analysis and a failure taxonomy further indicate that insufficient spreadsheet inspection and incorrect target-cell selection are the dominant bottlenecks. Together, these findings position SpreadsheetBench 2 as a challenging testbed for advancing reliable spreadsheet automation. Project page: https://spreadsheetbench.github.io/

Scientific research follows multi-turn, multi-step workflows that require proactively searching the literature, consulting figures and tables, and integrating evidence across papers to align experimental settings and support reproducible conclusions. This joint capability is not systematically assessed in existing benchmarks, which largely under-evaluate proactive search, multi-evidence integration and sustained evidence use over time. In this work, we introduce EpiBench, an episodic multi-turn multimodal benchmark that instantiates short research workflows. Given a research task, agents must navigate across papers over multiple turns, align evidence from figures and tables, and use the accumulated evidence in the memory to answer objective questions that require cross paper comparisons and multi-figure integration. EpiBench introduces a process-level evaluation framework for fine-grained testing and diagnosis of research agents. Our experiments show that even the leading model achieves an accuracy of only 29.23% on the hard split, indicating substantial room for improvement in multi-turn, multi-evidence research workflows, providing an evaluation platform for verifiable and reproducible research agents.

Multimodal GUI agents have achieved impressive results on general software benchmarks, yet their ability to operate professional scientific software remains largely unexplored. In materials science, sparse domain-specific web data, specialized interfaces, and tacit workflow conventions create blind spots that general-purpose pretraining cannot readily bridge. We present MatToolBench, the first real-environment benchmark for evaluating multimodal GUI agents on professional materials science software, comprising 204 tasks across 10 tools in three modalities: GUI operation, OriginPro scripting, and code-based database queries, all executed inside a Windows 11 VM. Each task is decomposed into fine-grained sub-criteria by domain experts, enabling interpretable partial-credit scoring; the GUI component of our multi-level evaluation pipeline achieves an average F1 of 0.98. For OriginPro figure-generation tasks, we further conduct a human-LLM agreement study to validate the use of a multimodal judge for secondary aesthetic assessment. Our experiments show that strong performance on general benchmarks does not transfer to professional scientific workflows, and that this gap is not a visual-grounding problem alone: failures arise from domain-specific operational knowledge, sparse pretraining coverage of scientific software, weak cross-tool artifact handoff, and critical states exposed only visually. Even the best model reaches only 25% success rate on GUI tasks and 45% on code tasks. MatToolBench therefore serves as a challenging diagnostic benchmark and real-environment testbed for data-scarce, knowledge-intensive scientific workflows.

Large Language Models (LLMs), with their exceptional ability to handle a wide range of tasks, have driven significant advancements in tackling reasoning and planning tasks, wherein decomposing complex problems into executable workflows is a crucial step in this process. Existing workflow evaluation frameworks either focus solely on holistic performance or suffer from limitations such as restricted scenario coverage, simplistic workflow structures, and lax evaluation standards. To this end, we introduce WorFBench, a unified workflow generation benchmark with multi-faceted scenarios and intricate graph workflow structures. Additionally, we present WorFEval, a systemic evaluation protocol utilizing subsequence and subgraph matching algorithms to accurately quantify the LLM agent's workflow generation capabilities. Through comprehensive evaluations across different types of LLMs, we discover distinct gaps between the sequence planning capabilities and graph planning capabilities of LLM agents, with even GPT-4 exhibiting a gap of around 15%. We also train two open-source models and evaluate their generalization abilities on held-out tasks. Furthermore, we observe that the generated workflows can enhance downstream tasks, enabling them to achieve superior performance with less time during inference. Code and dataset will be available at https://github.com/zjunlp/WorFBench.

Multi-agent LLM systems that generate structured workflows from natural-language requests are now deployed in production across cloud automation, DevOps, and enterprise process orchestration. Operating such systems exposes a recurring change-management problem. Routine updates, such as re-running the same input, swapping the underlying LLM, or refactoring an agent's prompt or orchestration code, frequently produce workflows that differ substantially from previously validated references. Engineers are then left without a principled way to decide whether a change is safe to ship. Automatic workflow evaluation is the natural tool for answering this question. In practice, however, metric scores are poorly calibrated, and a numeric change rarely communicates the severity of the underlying degradation. We introduce WorkflowPerturb, a controlled benchmark for studying workflow evaluation metrics by applying realistic, graded perturbations to golden workflows. WorkflowPerturb contains 4,973 golden workflows and 44,757 perturbed variants across three perturbation types (Missing Steps, Compressed Steps, and Description Changes), each applied at severity levels of 10%, 30%, and 50%. We benchmark multiple metric families and analyze their sensitivity and calibration using expected score trajectories and residuals. Our results characterize systematic differences across metric families and support severity-aware interpretation of workflow evaluation scores in change-management settings. Our dataset will be released upon acceptance.

Geometry optimization is a major cost in many quantum-chemical workflows: each optimization step requires one force evaluation, and at the density-functional level that evaluation dominates the wall time. Research in this area has produced a broad range of optimization methods, and we ask whether a language model can improve on the best of them through autoresearch. An agent rewrites the optimizer itself to minimize force-call counts, restrained by two admission gates that reject premature stopping and improvements that do not generalize to unseen molecules. Starting from Sella, the fastest open-source optimizer available, the search produces AutoSella, a family of two optimizers. Both of them deliver consistent force-call reductions relative to Sella across held-out molecular benchmarks and potentials not used during the search. Most notably, at the r2SCAN-3c DFT level, the best variant requires only 40.2--77.2% of Sella's force calls while achieving the same energy reduction, even though agent used no DFT gradients.

This paper introduces the Opus Workflow Evaluation Framework, a probabilistic-normative formulation for quantifying Workflow quality and efficiency. It integrates notions of correctness, reliability, and cost into a coherent mathematical model that enables direct comparison, scoring, and optimization of Workflows. The framework combines the Opus Workflow Reward, a probabilistic function estimating expected performance through success likelihood, resource usage, and output gain, with the Opus Workflow Normative Penalties, a set of measurable functions capturing structural and informational quality across Cohesion, Coupling, Observability, and Information Hygiene. It supports automated Workflow assessment, ranking, and optimization within modern automation systems such as Opus and can be integrated into Reinforcement Learning loops to guide Workflow discovery and refinement. In this paper, we introduce the Opus Workflow Reward model that formalizes Workflow success as a probabilistic expectation over costs and outcomes. We define measurable Opus Workflow Normative Penalties capturing structural, semantic, and signal-related properties of Workflows. Finally, we propose a unified optimization formulation for identifying and ranking optimal Workflows under joint Reward-Penalty trade-offs.

LLM agents are expected to complete end-to-end units of work across software tools, business services, and local workspaces. Yet many agent benchmarks freeze a curated task set at release time and grade mainly the final response, making it difficult to evaluate agents against evolving workflow demand or verify whether a task was executed. We introduce Claw-Eval-Live, a live benchmark for workflow agents that separates a refreshable signal layer, updated across releases from public workflow-demand signals, from a reproducible, time-stamped release snapshot. Each release is constructed from public workflow-demand signals, with ClawHub Top-500 skills used in the current release, and materialized as controlled tasks with fixed fixtures, services, workspaces, and graders. For grading, Claw-Eval-Live records execution traces, audit logs, service state, and post-run workspace artifacts, using deterministic checks when evidence is sufficient and structured LLM judging only for semantic dimensions. The release contains 105 tasks spanning controlled business services and local workspace repair, and evaluates 13 frontier models under a shared public pass rule. Experiments reveal that reliable workflow automation remains far from solved: the leading model passes only 66.7% of tasks and no model reaches 70%. Failures are structured by task family and execution surface, with HR, management, and multi-system business workflows as persistent bottlenecks and local workspace repair comparatively easier but unsaturated. Leaderboard rank alone is insufficient because models with similar pass rates can diverge in overall completion, and task-level discrimination concentrates in a middle band of tasks. Claw-Eval-Live suggests that workflow-agent evaluation should be grounded twice, in fresh external demand and in verifiable agent action.

Recent advancements in large language models (LLMs) have driven a revolutionary paradigm shift in process automation from Robotic Process Automation to Agentic Process Automation by automating the workflow orchestration procedure based on LLMs. However, existing LLMs (even the advanced OpenAI GPT-4o) are confined to achieving satisfactory capability in workflow orchestration. To address this limitation, we present WorkflowLLM, a data-centric framework elaborately designed to enhance the capability of LLMs in workflow orchestration. It first constructs a large-scale fine-tuning dataset WorkflowBench with 106,763 samples, covering 1,503 APIs from 83 applications across 28 categories. Specifically, the construction process can be divided into three phases: (1) Data Collection: we collect real-world workflow data from Apple Shortcuts and RoutineHub, transcribing them into Python-style code. We further equip them with generated hierarchical thought via ChatGPT. (2) Query Expansion: we prompt ChatGPT to generate more task queries to enrich the diversity and complexity of workflows. (3) Workflow Generation: we leverage an annotator model trained on collected data to generate workflows for synthesized queries. Finally, we merge the synthetic samples that pass quality confirmation with the collected samples to obtain the WorkflowBench. Based on WorkflowBench, we fine-tune Llama-3.1-8B to obtain WorkflowLlama. Our experiments show that WorkflowLlama demonstrates a strong capacity to orchestrate complex workflows, while also achieving notable generalization performance on previously unseen APIs. Additionally, WorkflowBench exhibits robust zero-shot generalization capabilities on an out-of-distribution task planning dataset, T-Eval. Our data and code are available at https://github.com/OpenBMB/WorkflowLLM.

Recent studies have shown that carefully designed workflows coordinating large language models(LLMs) significantly enhance task-solving capabilities compared to using a single model. While an increasing number of works focus on autonomous workflow construction, most existing approaches rely solely on historical experience, leading to limitations in efficiency and adaptability. We argue that while historical experience is valuable, workflow construction should also flexibly respond to the unique characteristics of each task. To this end, we propose an a priori dynamic framework for automated workflow construction. Our framework first leverages Q-table learning to optimize the decision space, guiding agent decisions and enabling effective use of historical experience. At the same time, agents evaluate the current task progress and make a priori decisions regarding the next executing agent, allowing the system to proactively select the more suitable workflow structure for each given task. Additionally, we incorporate mechanisms such as cold-start initialization, early stopping, and pruning to further improve system efficiency. Experimental evaluations on four benchmark datasets demonstrate the feasibility and effectiveness of our approach. Compared to state-of-the-art baselines, our method achieves an average improvement of 4.05%, while reducing workflow construction and inference costs to only 30.68%-48.31% of those required by existing methods.

Data cleaning is a time-consuming and error-prone manual process, even with modern workflow tools such as OpenRefine. We present AutoDCWorkflow, an LLM-based pipeline for automatically generating data-cleaning workflows. The pipeline takes a raw table and a data analysis purpose, and generates a sequence of OpenRefine operations designed to produce a minimal, clean table sufficient to address the purpose. Six operations correspond to common data quality issues, including format inconsistencies, type errors, and duplicates. To evaluate AutoDCWorkflow, we create a benchmark with metrics assessing answers, data, and workflow quality for 142 purposes using 96 tables across six topics. The evaluation covers three key dimensions: (1) Purpose Answer: can the cleaned table produce a correct answer? (2) Column (Value): how closely does it match the ground truth table? (3) Workflow (Operations): to what extent does the generated workflow resemble the human-curated ground truth? Experiments show that Llama 3.1, Mistral, and Gemma 2 significantly enhance data quality, outperforming the baseline across all metrics. Gemma 2-27B consistently generates high-quality tables and answers, while Gemma 2-9B excels in producing workflows that closely resemble human-annotated versions.

The increasing adoption of agentic workflows across diverse domains brings a critical need to scalably and systematically evaluate the complex traces these systems generate. Current evaluation methods depend on manual, domain-specific human analysis of lengthy workflow traces - an approach that does not scale with the growing complexity and volume of agentic outputs. Error analysis in these settings is further complicated by the interplay of external tool outputs and language model reasoning, making it more challenging than traditional software debugging. In this work, we (1) articulate the need for robust and dynamic evaluation methods for agentic workflow traces, (2) introduce a formal taxonomy of error types encountered in agentic systems, and (3) present a set of 148 large human-annotated traces (TRAIL) constructed using this taxonomy and grounded in established agentic benchmarks. To ensure ecological validity, we curate traces from both single and multi-agent systems, focusing on real-world applications such as software engineering and open-world information retrieval. Our evaluations reveal that modern long context LLMs perform poorly at trace debugging, with the best Gemini-2.5-pro model scoring a mere 11% on TRAIL. Our dataset and code are made publicly available to support and accelerate future research in scalable evaluation for agentic workflows.

Existing ML benchmarks lack the depth and diversity of annotations needed for evaluating models on business process management (BPM) tasks. BPM is the practice of documenting, measuring, improving, and automating enterprise workflows. However, research has focused almost exclusively on one task - full end-to-end automation using agents based on multimodal foundation models (FMs) like GPT-4. This focus on automation ignores the reality of how most BPM tools are applied today - simply documenting the relevant workflow takes 60% of the time of the typical process optimization project. To address this gap we present WONDERBREAD, the first benchmark for evaluating multimodal FMs on BPM tasks beyond automation. Our contributions are: (1) a dataset containing 2928 documented workflow demonstrations; (2) 6 novel BPM tasks sourced from real-world applications ranging from workflow documentation to knowledge transfer to process improvement; and (3) an automated evaluation harness. Our benchmark shows that while state-of-the-art FMs can automatically generate documentation (e.g. recalling 88% of the steps taken in a video demonstration of a workflow), they struggle to re-apply that knowledge towards finer-grained validation of workflow completion (F1 < 0.3). We hope WONDERBREAD encourages the development of more "human-centered" AI tooling for enterprise applications and furthers the exploration of multimodal FMs for the broader universe of BPM tasks. We publish our dataset and experiments here: https://github.com/HazyResearch/wonderbread

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

Workflows are a fundamental component of automation in enterprise platforms, enabling the orchestration of tasks, data processing, and system integrations. Despite being widely used, building workflows can be complex, often requiring manual configuration through low-code platforms or visual programming tools. To simplify this process, we explore the use of generative foundation models, particularly vision-language models (VLMs), to automatically generate structured workflows from visual inputs. Translating hand-drawn sketches or computer-generated diagrams into executable workflows is challenging due to the ambiguity of free-form drawings, variations in diagram styles, and the difficulty of inferring execution logic from visual elements. To address this, we introduce StarFlow, a framework for generating structured workflow outputs from sketches using vision-language models. We curate a diverse dataset of workflow diagrams -- including synthetic, manually annotated, and real-world samples -- to enable robust training and evaluation. We finetune and benchmark multiple vision-language models, conducting a series of ablation studies to analyze the strengths and limitations of our approach. Our results show that finetuning significantly enhances structured workflow generation, outperforming large vision-language models on this task.

This paper introduces Opus, a novel framework for generating and optimizing Workflows tailored to complex Business Process Outsourcing (BPO) use cases, focusing on cost reduction and quality enhancement while adhering to established industry processes and operational constraints. Our approach generates executable Workflows from Intention, defined as the alignment of Client Input, Client Output, and Process Context. These Workflows are represented as Directed Acyclic Graphs (DAGs), with nodes as Tasks consisting of sequences of executable Instructions, including tools and human expert reviews. We adopt a two-phase methodology: Workflow Generation and Workflow Optimization. In the Generation phase, Workflows are generated using a Large Work Model (LWM) informed by a Work Knowledge Graph (WKG) that encodes domain-specific procedural and operational knowledge. In the Optimization phase, Workflows are transformed into Workflow Graphs (WFGs), where optimal Workflows are determined through path optimization. Our experiments demonstrate that state-of-the-art Large Language Models (LLMs) face challenges in reliably retrieving detailed process data as well as generating industry-compliant workflows. The key contributions of this paper include: - The integration of a Work Knowledge Graph (WKG) into a Large Work Model (LWM), enabling the generation of context-aware, semantically aligned, structured and auditable Workflows. - A two-phase approach that combines Workflow Generation from Intention with graph-based Workflow Optimization. - Opus Alpha 1 Large and Opus Alpha 1 Small, models that outperform state-of-the-art LLMs by 38\% and 29\% respectively in Workflow Generation for a Medical Coding use case.

Existing computer-use agent benchmarks do not fully evaluate agents acting as assistants. A useful assistant retrieves information across complex, multi-step workflows, synthesizes it into artifacts (documents, presentations, spreadsheets), and navigates program interfaces to produce a coherent final product. Such workflows demand reasoning and synthesis, decomposition of complex tasks, as well as visual and spatial understanding. To study agents on workflows like these, we introduce KNOWS, a benchmark of open-ended, complex, browser-based tasks that jointly evaluate these capabilities, with each task culminating in a produced artifact. To write tasks, we develop a task design rubric and a protocol for ensuring that tasks meet the requirements. Each task is paired with an evaluator, a program that combines deterministic checks with LLM judgments to balance the richness, reliability, and automation tradeoff inherent to agent evaluation. We evaluate and analyze frontier computer-use agents and browser-based harnesses. They achieve moderate scores on partial-success metrics, but the best performer fully succeeds in fewer than 3% of our complex, long-horizon tasks. Failures on visual steps render the resulting artifacts unusable, even when agents complete more than 50% of other evaluation steps. Our results expose limitations of current agents acting as end-to-end assistants, and call for progress on tool use, visual understanding, and long-horizon reasoning.

Large language models (LLMs) have demonstrated remarkable potential in solving complex tasks across diverse domains, typically by employing agentic workflows that follow detailed instructions and operational sequences. However, constructing these workflows requires significant human effort, limiting scalability and generalizability. Recent research has sought to automate the generation and optimization of these workflows, but existing methods still rely on initial manual setup and fall short of achieving fully automated and effective workflow generation. To address this challenge, we reformulate workflow optimization as a search problem over code-represented workflows, where LLM-invoking nodes are connected by edges. We introduce AFlow, an automated framework that efficiently explores this space using Monte Carlo Tree Search, iteratively refining workflows through code modification, tree-structured experience, and execution feedback. Empirical evaluations across six benchmark datasets demonstrate AFlow's efficacy, yielding a 5.7% average improvement over state-of-the-art baselines. Furthermore, AFlow enables smaller models to outperform GPT-4o on specific tasks at 4.55% of its inference cost in dollars. The code will be available at https://github.com/geekan/MetaGPT.

LLM-based agents have emerged as promising tools, which are crafted to fulfill complex tasks by iterative planning and action. However, these agents are susceptible to undesired planning hallucinations when lacking specific knowledge for expertise-intensive tasks. To address this, preliminary attempts are made to enhance planning reliability by incorporating external workflow-related knowledge. Despite the promise, such infused knowledge is mostly disorganized and diverse in formats, lacking rigorous formalization and comprehensive comparisons. Motivated by this, we formalize different formats of workflow knowledge and present FlowBench, the first benchmark for workflow-guided planning. FlowBench covers 51 different scenarios from 6 domains, with knowledge presented in diverse formats. To assess different LLMs on FlowBench, we design a multi-tiered evaluation framework. We evaluate the efficacy of workflow knowledge across multiple formats, and the results indicate that current LLM agents need considerable improvements for satisfactory planning. We hope that our challenging benchmark can pave the way for future agent planning research.

Large Language Models (LLMs) are increasingly deployed as autonomous agents that reason, use tools, and act over multiple steps. Yet most hallucination benchmarks still evaluate only the final output, missing failures that originate in intermediate Thought-Action-Observation steps. We present Trajel, a dataset and evaluation framework for auditing trajectory-level hallucinations in multi-agent industrial workflows. Trajel introduces a five-type hallucination taxonomy (factual, referential, logical, procedural, and scope-based) over expert-annotated agent traces from AssetOpsBench. We benchmark supervised detection models at the subtask, trajectory, and long-context levels. Our results show that the most common failure modes are missed by existing benchmarks, that nearly half of hallucinated trajectories involve multiple types at once, and that automated detectors with high binary accuracy still misclassify the subtlest types. Trajectory-aware detection significantly outperforms standard post-hoc verification, making taxonomy-grounded evaluation necessary for safer agentic deployment.

Modern software systems require code that is not only functional but also maintainable and well-structured. Although Large Language Models (LLMs) are increasingly used to automate software development, most studies focus on isolated, single-agent function-level generation. This work examines how process structure and role specialization shape multi-agent LLM workflows for class-level code generation. We simulate a Waterfall-style development cycle covering Requirement, Design, Implementation, and Testing using three LLMs (GPT-4o-mini, DeepSeek-Chat, and Claude-3.5-Haiku) on 100 Python tasks from the ClassEval benchmark. Our findings show that multi-agent workflows reorganize, rather than consistently enhance, model performance. Waterfall-style collaboration produces cleaner and more maintainable code but often reduces functional correctness (-37.8\% for GPT-4o-mini and -39.8\% for DeepSeek-Chat), with Claude-3.5-Haiku as a notable exception (+9.5\%). Importantly, process constraints shift failure characteristics: structural issues such as missing code decrease, while semantic and validation errors become more frequent. Among all stages, Testing exerts the strongest influence by improving verification coverage but also introducing new reasoning failures, whereas Requirement and Design have comparatively modest effects. Overall, this study provides empirical evidence that software process structure fundamentally alters how LLMs reason, collaborate, and fail, revealing inherent trade-offs between rigid workflow discipline and flexible problem-solving in multi-agent code generation.

Recent text-to-image models have made substantial progress in photorealism, aesthetics, and text-image alignment. Yet visually appealing images can still violate real-world plausibility, exhibiting malformed object structures, impossible anatomy, physically implausible interactions, or inconsistent spatial relationships. Such failures are not well captured by existing fidelity, aesthetics, preference, or alignment metrics. To address this gap, we introduce TerraVis, a framework for evaluating world-grounded visual consistency in generated images. TerraVis defines a structured taxonomy of world-consistency violations spanning object-, interaction-, and scene-level failures, and employs a multi-stage evaluation framework to identify and quantify them. Given an image, TerraVis first uses an MLLM to assess its eligibility for evaluation, then detects violations across 18 taxonomy-defined types and classifies them as minor or major to derive an overall world-consistency score. Across diverse open-source and proprietary text-to-image models on two widely used benchmarks, TerraVis achieves the strongest correlation with human judgments of world consistency among existing metrics. Our benchmark results further show that models that achieve strong performance on conventional metrics can still exhibit substantial world-consistency failures. These findings highlight world consistency as a complementary evaluation dimension and demonstrate that TerraVis enables systematic quantification, diagnosis, and comparison of such failures. Our code is publicly available at https://github.com/ShyFoo/TerraVis.

This paper introduces the Opus Prompt Intention Framework, designed to improve complex Workflow Generation with instruction-tuned Large Language Models (LLMs). We propose an intermediate Intention Capture layer between user queries and Workflow Generation, implementing the Opus Workflow Intention Framework, which consists of extracting Workflow Signals from user queries, interpreting them into structured Workflow Intention objects, and generating Workflows based on these Intentions. Our results show that this layer enables LLMs to produce logical and meaningful outputs that scale reliably as query complexity increases. On a synthetic benchmark of 1,000 multi-intent query-Workflow(s) pairs, applying the Opus Prompt Intention Framework to Workflow Generation yields consistent improvements in semantic Workflow similarity metrics. In this paper, we introduce the Opus Prompt Intention Framework by applying the concepts of Workflow Signal and Workflow Intention to LLM-driven Workflow Generation. We present a reproducible, customizable LLM-based Intention Capture system to extract Workflow Signals and Workflow Intentions from user queries. Finally, we provide empirical evidence that the proposed system significantly improves Workflow Generation quality compared to direct generation from user queries, particularly in cases of Mixed Intention Elicitation.

Deep research (DR) systems are increasingly used for complex information-seeking tasks, but existing works mainly focus on generating reports and summaries. In contrast, many enterprise tasks instead require an agent to identify concrete workflows which is a sequence of action-steps. For example, rather than summarizing budgeting policies, an agent should be able to determine the steps needed to answer a question such as: "How do I request new headcount given a fixed budget?". Therefore, we introduce DRFLOW, a benchmark for evaluating personalized workflows predicted by agents from heterogeneous sources. Each task requires the agent to identify relevant evidence from scattered sources, then use that evidence to predict the correct action-step sequence for the user's task. DRFLOW contains 100 tasks across five domains, with 1,246 reference workflow steps grounded in more than 3,900 sources. We define seven diagnostic metrics covering factual grounding, step recovery, structural ordering, condition resolution, and personalization. We further present DRFLOW-Agent (DRFA), a workflow-oriented reference agent to predict personalized workflow. We show that although DRFA improves over strong baseline agents (upto 10.02% average F1 score), there is substantial room for improvement remains across these workflow metrics, indicating that predicting complete and correct personalized workflows remains a challenging frontier for deep research.

Optimizing LLM-based agentic workflows is challenging for scaling AI capabilities. Current methods rely on coarse, end-to-end evaluation signals and lack fine-grained signals on where to refine, often resulting in inefficient or low-impact modifications. To address these limitations, we propose JudgeFlow, an Evaluation-Judge-Optimization-Update pipeline. We incorporate reusable, configurable logic blocks into agentic workflows to capture fundamental forms of logic. On top of this abstraction, we design a dedicated Judge module that inspects execution traces particularly failed runs and assigns rank-based responsibility scores to problematic blocks. These fine-grained diagnostic signals are then leveraged by an LLM-based optimizer, which focuses modifications on the most problematic block in the workflow. Our approach improves sample efficiency, enhances interpretability through block-level diagnostics, and provides a scalable foundation for automating increasingly complex agentic workflows. We evaluate JudgeFlow on mathematical reasoning and code generation benchmarks, where JudgeFlow achieves superior performance and efficiency compared to existing methods.

Large language model (LLM) agents are increasingly used for complex information-extraction tasks, yet it remains unclear whether agentic components such as reflection and memory lead to observable and controllable improvements over fixed LLM workflows. We study this question through conference-paper dataset extraction, where a system must identify datasets mentioned in scholarly PDFs and produce structured records. We compare a fixed workflow baseline with reflective agent variants and specify an optimized agent condition (S2) that extends the same task with richer PDF tools and dynamic tool selection. Our evaluation emphasizes process-level behavior--including tool execution, retries, reflection, memory use, runtime, and failure recovery--while treating extraction coverage and field completeness as secondary outcome measures. The paper characterizes when agentic mechanisms change system behavior, whether these changes improve task completion, and how the observed failure modes motivate an optimized agent design under the same evaluation harness.

Text-to-Image generation has evolved from basic image synthesis into a frequently used core capability in professional creative workflows, where simple text-image alignment can no longer satisfy users' pressing demands for faithful real-world reconstruction and genuine creative expression. Existing benchmarks, however, remain anchored in these foundational criteria and do not yet capture the nuanced capabilities that matter in authentic artistic practice, making it difficult to reliably distinguish state-of-the-art T2I models. To address the gap, we introduce Qwen-Image-Bench, a creator-centric benchmark co-designed with professional artists and grounded in real-world creation scenarios. Qwen-Image-Bench enriches conventional evaluation with two application-driven dimensions: Real-world Fidelity and Creative Generation. Drawing on the staged reasoning inherent in professional artistic workflows, we organize these five pillars into a top-down hierarchical taxonomy that further decomposes into 23 second-level sub-capabilities and 56 third-level verifiable rubrics. To ensure broad coverage, we curate 1000 stratified prompts with each prompt jointly exercising more than four fine-grained facets across multiple pillars. We train a unified judge model Q-Judger based on Qwen3.6-27B, supervised by 80 professional annotators from global art academies under blind labeling and triple-review protocols, that scores every image across all 56 verifiable facets, producing fine-grained, rubric-grounded, and fully attributable diagnostics rather than a single opaque score. Empirically, Qwen-Image-Bench reliably distinguishes leading T2I models, achieving the greatest separation on the two application-driven dimensions of Real-world Fidelity and Creative Generation where existing benchmarks provide little insight, while also providing a trustworthy optimization signal for production-level T2I development.

Agentic repository-level code understanding is essential for automating complex software engineering tasks, yet the field lacks reliable benchmarks. Existing evaluations often overlook the long tail topics and rely on popular repositories where Large Language Models (LLMs) can cheat via memorized knowledge. To address this, we introduce SWE-QA-Pro, a benchmark constructed from diverse, long-tail repositories with executable environments. We enforce topical balance via issue-driven clustering to cover under-represented task types and apply a rigorous difficulty calibration process: questions solvable by direct-answer baselines are filtered out. This results in a dataset where agentic workflows significantly outperform direct answering (e.g., a ~13-point gap for Claude Sonnet 4.5), confirming the necessity of agentic codebase exploration. Furthermore, to tackle the scarcity of training data for such complex behaviors, we propose a scalable synthetic data pipeline that powers a two-stage training recipe: Supervised Fine-Tuning (SFT) followed by Reinforcement Learning from AI Feedback (RLAIF). This approach allows small open models to learn efficient tool usage and reasoning. Empirically, a Qwen3-8B model trained with our recipe surpasses GPT-4o by 2.3 points on SWE-QA-Pro and substantially narrows the gap to state-of-the-art proprietary models, demonstrating both the validity of our evaluation and the effectiveness of our agentic training workflow.

Tool-augmented large language models have advanced from single-turn question answering to deep research workflows that iteratively plan queries, invoke external tools, and synthesize information to address complex information needs. Evaluating such workflows presents a fundamental challenge: reliance on live APIs introduces non-determinism, as tool invocations may yield different results across runs due to temporal drift, rate limiting, and evolving backend states. This variance undermines reproducibility and invalidates cross-system comparisons. We present ScholarGym, a simulation environment for reproducible evaluation of deep research workflows on academic literature. The environment decouples workflow components into query planning, tool invocation, and relevance assessment, enabling fine-grained analysis of each stage under controlled conditions. Built on a static corpus of 570K papers with deterministic retrieval, ScholarGym provides 2,536 queries with expert-annotated ground truth. Experiments across diverse backbone models reveal how reasoning capabilities, planning strategies, and selection mechanisms interact over iterative refinement.

We introduce QualityFlow, a dynamic agentic workflow for program synthesis. Given the English description of a programming problem and a set of unit tests, the model's goal is to synthesize the correct program that solves the problem and passes the tests. QualityFlow includes large language model (LLM) agents resembling a software development team, including code generation, testing, and self-debugging. We propose the LLM Quality Checker, which explicitly "imagines" whether the synthesized programs' execution would conform to the unit tests. The Quality Checks dynamically control the workflow, including actions to submit the final answer, clarify the problem statement, and revert previous workflow steps. Our experiments show that the Quality Checker can precisely accept any correct program, mitigate faulty synthesized tests, and prevent potential workflow deviation. QualityFlow establishes the state-of-the-art results on four program synthesis benchmarks: MBPP, HumanEval, and stricter evaluations from MBPP-EvalPlus and HumanEval-EvalPlus.

The rapidly evolving field of Robotic Process Automation (RPA) has made significant strides in automating repetitive processes, yet its effectiveness diminishes in scenarios requiring spontaneous or unpredictable tasks demanded by users. This paper introduces a novel approach, FlowMind, leveraging the capabilities of Large Language Models (LLMs) such as Generative Pretrained Transformer (GPT), to address this limitation and create an automatic workflow generation system. In FlowMind, we propose a generic prompt recipe for a lecture that helps ground LLM reasoning with reliable Application Programming Interfaces (APIs). With this, FlowMind not only mitigates the common issue of hallucinations in LLMs, but also eliminates direct interaction between LLMs and proprietary data or code, thus ensuring the integrity and confidentiality of information - a cornerstone in financial services. FlowMind further simplifies user interaction by presenting high-level descriptions of auto-generated workflows, enabling users to inspect and provide feedback effectively. We also introduce NCEN-QA, a new dataset in finance for benchmarking question-answering tasks from N-CEN reports on funds. We used NCEN-QA to evaluate the performance of workflows generated by FlowMind against baseline and ablation variants of FlowMind. We demonstrate the success of FlowMind, the importance of each component in the proposed lecture recipe, and the effectiveness of user interaction and feedback in FlowMind.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

Drug target discovery requires distinguishing molecules that causally drive disease from those that are merely associated with it. Training and evaluating AI agents to perform this workflow end-to-end is difficult because real world biobanks lack known causal ground truth and participant-level data is access controlled. We introduce DrugTargetWorld, a framework that procedurally generates simulated biobanks, or "worlds," with known but concealed causal structure. Each world contains genotypes, proteins, health records, outcomes, and synthetic magnetic resonance imaging (MRI) for 54,000 participants. Agents must construct a disease phenotype, identify causal driver proteins, infer the beneficial direction of modulation, and optionally conduct virtual 'wet lab' experiments. We evaluated nine agents in 540 episodes across 20 cardiovascular worlds and three experimental budgets. Opus 5 and GPT-5.6 Sol achieved the highest mean composite scores, 39.98 and 35.38 of 100, respectively, and both recovered 64% of causal drivers on average. However, no agent reliably distinguished misleading non-causal proteins, and performance remained limited by the integrative judgments required to connect phenotype construction, causal evidence, and intervention decisions. By making each world's causal structure known to the evaluator but hidden from the agent, DrugTargetWorld turns end-to-end drug target discovery into a scalable training and evaluation problem with verifiable reward.

Computer Science education fundamentally depends on intensive laboratory hours to foster true programming mastery and logical reasoning. However, the widespread adoption of Generative Artificial Intelligence (AI) has made it virtually impossible to distinguish authentic student effort from instant AI code synthesis by evaluating final submissions alone. To preserve pedagogical integrity, educators must enforce authentic coding discipline, guiding students through unassisted, iterative development cycles. While centralized environments like JupyterHub provide instructors with a platform to host and monitor the learning process step-by-step, they introduce severe operational vulnerabilities; because Jupyter environments inherently allow arbitrary shell command execution, they expose the underlying shared host to unauthorized system manipulation and lateral movement. This paper presents VISMATIC, a secure, low-cost framework designed to resolve this tension between process-oriented monitoring and infrastructure security. By pairing robust environment isolation with explicit user-interaction tracking at the API level, VISMATIC captures authentic programming behaviors without exposing the underlying host system. Evaluation from a pilot student cohort demonstrates that our macro-level behavioral metrics successfully flag statistical anomalies indicative of automated or off-platform workflows while preserving student anonymity, offering a scalable blueprint for safeguarding educational discipline in the AI era.

Evaluating large language model (LLM)-based multi-agent systems remains a critical challenge, as these systems must exhibit reliable coordination, transparent decision-making, and verifiable performance across evolving tasks. Existing evaluation approaches often limit themselves to single-response scoring or narrow benchmarks, which lack stability, extensibility, and automation when deployed in enterprise settings at multi-agent scale. We present AEMA (Adaptive Evaluation Multi-Agent), a process-aware and auditable framework that plans, executes, and aggregates multi-step evaluations across heterogeneous agentic workflows under human oversight. Compared to a single LLM-as-a-Judge, AEMA achieves greater stability, human alignment, and traceable records that support accountable automation. Our results on enterprise-style agent workflows simulated using realistic business scenarios demonstrate that AEMA provides a transparent and reproducible pathway toward responsible evaluation of LLM-based multi-agent systems. Keywords Agentic AI, Multi-Agent Systems, Trustworthy AI, Verifiable Evaluation, Human Oversight

Financial agents powered by large language models (LLMs) are increasingly deployed for investment analysis, risk assessment, and automated decision-making, where their abilities to plan, invoke tools, and manipulate mutable state introduce new security risks in high-stakes and highly regulated financial environments. However, existing safety evaluations largely focus on language-model-level content compliance or abstract agent settings, failing to capture execution-grounded risks arising from real operational workflows and state-changing actions. To bridge this gap, we propose FinVault, the first execution-grounded security benchmark for financial agents, comprising 31 regulatory case-driven sandbox scenarios with state-writable databases and explicit compliance constraints, together with 107 real-world vulnerabilities and 963 test cases that systematically cover prompt injection, jailbreaking, financially adapted attacks, as well as benign inputs for false-positive evaluation. Experimental results reveal that existing defense mechanisms remain ineffective in realistic financial agent settings, with average attack success rates (ASR) still reaching up to 50.0\% on state-of-the-art models and remaining non-negligible even for the most robust systems (ASR 6.7\%), highlighting the limited transferability of current safety designs and the need for stronger financial-specific defenses. Our code can be found at https://github.com/aifinlab/FinVault.

Language-model agents are increasingly used as persistent coworkers that assist users across multiple working days. During such workflows, the surrounding environment may change independently of the agent: new emails arrive, calendar entries shift, knowledge-base records are updated, and evidence appears across images, scanned PDFs, audio, video, and spreadsheets. Existing benchmarks do not adequately evaluate this setting because they typically run within a single static episode and remain largely text-centric. We introduce , a benchmark for coworker agents built around multi-turn multi-day tasks, a stateful sandboxed service environment whose state evolves between turns, and rule-based verification. The current release contains 100 tasks across 13 professional scenarios, executed against five stateful sandboxed services (filesystem, email, calendar, knowledge base, spreadsheet) and scored by 1537 deterministic Python checkers over post-execution service state; no LLM-as-judge is invoked during scoring. We benchmark seven frontier agent systems. The strongest model reaches 75.8 weighted score, but the best strict Task Success is only 20.0\%, indicating that partial progress is common while complete end-to-end workflow completion remains rare. Turn-level analysis shows that performance drops after the first exogenous environment update, highlighting adaptation to changing state as a key open challenge. We release the benchmark, evaluation harness, and construction pipeline to support reproducible coworker-agent evaluation.

Large language models have achieved remarkable capabilities across diverse tasks, yet their internal decision-making processes remain largely opaque, limiting our ability to inspect, control, and systematically improve them. This opacity motivates a growing body of research in mechanistic interpretability, with sparse autoencoders (SAEs) emerging as one of the most promising tools for decomposing model activations into sparse, interpretable feature representations. We introduce Qwen-Scope, an open-source suite of SAEs built on the Qwen model family, comprising 14 groups of SAEs across 7 model variants from the Qwen3 and Qwen3.5 series, covering both dense and mixture-of-expert architectures. Built on top of these SAEs, we show that SAEs can go beyond post-hoc analysis to serve as practical interfaces for model development along four directions: (i) inference-time steering, where SAE feature directions control language, concepts, and preferences without modifying model weights; (ii) evaluation analysis, where activated SAE features provide a representation-level proxy for benchmark redundancy and capability coverage; (iii) data-centric workflows, where SAE features support multilingual toxicity classification and safety-oriented data synthesis; and (iv) post-training optimization, where SAE-derived signals are incorporated into supervised fine-tuning and reinforcement learning objectives to mitigate undesirable behaviors such as code-switching and repetition. Together, these results demonstrate that SAEs can serve not only as post-hoc analysis tools, but also as reusable representation-level interfaces for diagnosing, controlling, evaluating, and improving large language models. By open-sourcing Qwen-Scope, we aim to support mechanistic research and accelerate practical workflows that connect model internals to downstream behavior.

Reliable evaluation is essential for developing and deploying large language models, yet in practice it often requires substantial manual effort: practitioners must identify appropriate benchmarks, reproduce heterogeneous evaluation codebases, configure dataset schema mappings, and interpret aggregated metrics. To address these challenges, we present One-Eval, an agentic evaluation system that converts natural-language evaluation requests into executable, traceable, and customizable evaluation workflows. One-Eval integrates (i) NL2Bench for intent structuring and personalized benchmark planning, (ii) BenchResolve for benchmark resolution, automatic dataset acquisition, and schema normalization to ensure executability, and (iii) Metrics \& Reporting for task-aware metric selection and decision-oriented reporting beyond scalar scores. The system further incorporates human-in-the-loop checkpoints for review, editing, and rollback, while preserving sample evidence trails for debugging and auditability. Experiments show that One-Eval can execute end-to-end evaluations from diverse natural-language requests with minimal user effort, supporting more efficient and reproducible evaluation in industrial settings. Our framework is publicly available at https://github.com/OpenDCAI/One-Eval.

At present, executable visual workflows have emerged as a mainstream paradigm in real-world industrial deployments, offering strong reliability and controllability. However, in current practice, such workflows are almost entirely constructed through manual engineering: developers must carefully design workflows, write prompts for each step, and repeatedly revise the logic as requirements evolve-making development costly, time-consuming, and error-prone. To study whether large language models can automate this multi-round interaction process, we introduce Chat2Workflow, a benchmark for generating executable visual workflows directly from natural language, and propose a robust agentic framework to mitigate recurrent execution errors. Chat2Workflow is built from a large collection of real-world business workflows, with each instance designed so that the generated workflow can be transformed and directly deployed to practical workflow platforms such as Dify and Coze. Experimental results show that while state-of-the-art language models can often capture high-level intent, they struggle to generate correct, stable, and executable workflows, especially under complex or changing requirements. Although our agentic framework yields up to 5.34% resolve rate gains, the remaining real-world gap positions Chat2Workflow as a foundation for advancing industrial-grade automation. Code is available at https://github.com/zjunlp/Chat2Workflow.

Scientific workflow management systems (WMS) support scalable and reproducible execution of complex pipelines, but workflow design, implementation, and debugging remain largely manual and require significant expertise. Recent approaches using large language models (LLMs) show promise for workflow generation from natural language, but often rely on direct code synthesis, which limits transparency, reproducibility, and integration with workflow systems. We present an AI-assisted approach to scientific workflow management that combines specification-driven workflow generation, automated debugging, and distributed execution. The method introduces a structured specification phase that separates workflow intent, design, and implementation, allowing validation prior to code generation. We also develop an LLM-based debugging agent that diagnoses and resolves failures across multiple system layers. To support distributed execution and user interaction, we integrate Pegasus, a widely used WMS, with a Model Context Protocol (MCP) layer, providing a unified interface for workflow submission, monitoring, and control. We evaluate the approach using a federated learning workflow for medical imaging, chosen for its parallel, iterative, and dependency-intensive structure. The system generated and executed large-scale workflows with thousands of jobs, reduced debugging effort, and allowed non-expert users to construct workflows with expert-level design patterns. These results indicate that end-to-end AI-assisted workflow generation and execution is feasible, and point toward AI-driven platforms for managing the scientific workflow lifecycle.

Large Language Model (LLM)-based multi-agent systems are increasingly powerful, but current agentic workflow optimization paradigms make an unsatisfying trade-off. Task-level methods spend substantial offline compute yet deploy only a single workflow, leaving complementary candidates unused, while query-level methods synthesize a new workflow per query at substantial inference cost. Our motivating analysis shows these paradigms are more complementary than competing: workflows discovered during offline search often solve different subsets of queries, and many queries handled by expensive query-level generation can already be solved by cheaper precomputed workflows. This suggests a different objective: rather than searching for one universally best workflow or regenerating one per instance, we should build a compact bank of reusable, complementary workflows and select among them adaptively at inference time. Doing so requires solving three coupled problems: generating complementary rather than redundant candidates, compressing them into a small deployable portfolio, and assigning each query to the right workflow under a performance-cost trade-off. To this end, we present FlowBank, a three-stage framework for portfolio-based agentic workflow optimization. Diversifying proposes DiverseFlow to steer search toward under-covered queries and produce a high-coverage candidate pool. Curating proposes CuraFlow to compress this pool into a compact portfolio with minimal redundancy. Matching casts deployment as edge-value prediction on a query-workflow bipartite graph and routes each incoming query to the portfolio member with the best predicted utility. Across five benchmarks, FlowBank achieves the highest average score among the evaluated methods while remaining cost-competitive, improving over the strongest automated and handcrafted baselines by 4.26% and 14.92% relative, respectively.

Periodic human activities with implicit workflows are common in manufacturing, sports, and daily life. While short-term periodic activities -- characterized by simple structures and high-contrast patterns -- have been widely studied, long-term periodic workflows with low-contrast patterns remain largely underexplored. To bridge this gap, we introduce the first benchmark comprising 580 multimodal human activity sequences featuring long-term periodic workflows. The benchmark supports three evaluation tasks aligned with real-world applications: unsupervised periodic workflow detection, task completion tracking, and procedural anomaly detection. We also propose a lightweight, training-free baseline for modeling diverse periodic workflow patterns. Experiments show that: (i) our benchmark presents significant challenges to both unsupervised periodic detection methods and zero-shot approaches based on powerful large language models (LLMs); (ii) our baseline outperforms competing methods by a substantial margin in all evaluation tasks; and (iii) in real-world applications, our baseline demonstrates deployment advantages on par with traditional supervised workflow detection approaches, eliminating the need for annotation and retraining. Our project page is https://sites.google.com/view/periodicworkflow.

Foundation models (FMs), particularly large language models (LLMs), have shown significant promise in various software engineering (SE) tasks, including code generation, debugging, and requirement refinement. Despite these advances, existing evaluation frameworks are insufficient for assessing model performance in iterative, context-rich workflows characteristic of SE activities. To address this limitation, we introduce SE Arena, an interactive platform designed to evaluate SE-focused chatbots. SE Arena provides a transparent, open-source leaderboard, supports multi-round conversational workflows, and enables end-to-end model comparisons. Moreover, SE Arena incorporates a new feature called RepoChat, which automatically injects repository-related context (e.g., issues, commits, pull requests) into the conversation, further aligning evaluations with real-world development processes. This paper outlines the design and capabilities of SE Arena, emphasizing its potential to advance the evaluation and practical application of FMs in software engineering.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Data science and engineering workflows often span multiple stages, from warehousing to orchestration, using tools like BigQuery, dbt, and Airbyte. As vision language models (VLMs) advance in multimodal understanding and code generation, VLM-based agents could potentially automate these workflows by generating SQL queries, Python code, and GUI operations. This automation can improve the productivity of experts while democratizing access to large-scale data analysis. In this paper, we introduce Spider2-V, the first multimodal agent benchmark focusing on professional data science and engineering workflows, featuring 494 real-world tasks in authentic computer environments and incorporating 20 enterprise-level professional applications. These tasks, derived from real-world use cases, evaluate the ability of a multimodal agent to perform data-related tasks by writing code and managing the GUI in enterprise data software systems. To balance realistic simulation with evaluation simplicity, we devote significant effort to developing automatic configurations for task setup and carefully crafting evaluation metrics for each task. Furthermore, we supplement multimodal agents with comprehensive documents of these enterprise data software systems. Our empirical evaluation reveals that existing state-of-the-art LLM/VLM-based agents do not reliably automate full data workflows (14.0% success). Even with step-by-step guidance, these agents still underperform in tasks that require fine-grained, knowledge-intensive GUI actions (16.2%) and involve remote cloud-hosted workspaces (10.6%). We hope that Spider2-V paves the way for autonomous multimodal agents to transform the automation of data science and engineering workflow. Our code and data are available at https://spider2-v.github.io.

We introduce a finance & accounting benchmark (Finch) for evaluating AI agents on real-world, enterprise-grade professional workflows -- interleaving data entry, structuring, formatting, web search, cross-file retrieval, calculation, modeling, validation, translation, visualization, and reporting. Finch is sourced from authentic enterprise workspaces at Enron (15,000 spreadsheets and 500,000 emails from 150 employees) and other financial institutions, preserving in-the-wild messiness across multimodal artifacts (text, tables, formulas, charts, code, and images) and spanning diverse domains such as budgeting, trading, and asset management. We propose a workflow construction process that combines LLM-assisted discovery with expert annotation: (1) LLM-assisted, expert-verified derivation of workflows from real-world email threads and version histories of spreadsheet files, and (2) meticulous expert annotation for workflows, requiring over 700 hours of domain-expert effort. This yields 172 composite workflows with 384 tasks, involving 1,710 spreadsheets with 27 million cells, along with PDFs and other artifacts, capturing the intrinsically messy, long-horizon, knowledge-intensive, and collaborative nature of real-world enterprise work. We conduct both human and automated evaluations of frontier AI systems including GPT 5.1, Claude Sonnet 4.5, Gemini 3 Pro, Grok 4, and Qwen 3 Max, and GPT 5.1 Pro spends 16.8 minutes per workflow yet passes only 38.4% of workflows, while Claude Sonnet 4.5 passes just 25.0%. Comprehensive case studies further surface the challenges that real-world enterprise workflows pose for AI agents.

Large language models (LLMs) have demonstrated strong potential and impressive performance in automating the generation and optimization of workflows. However, existing approaches are marked by limited reasoning capabilities, high computational demands, and significant resource requirements. To address these issues, we propose DebFlow, a framework that employs a debate mechanism to optimize workflows and integrates reflexion to improve based on previous experiences. We evaluated our method across six benchmark datasets, including HotpotQA, MATH, and ALFWorld. Our approach achieved a 3\% average performance improvement over the latest baselines, demonstrating its effectiveness in diverse problem domains. In particular, during training, our framework reduces resource consumption by 37\% compared to the state-of-the-art baselines. Additionally, we performed ablation studies. Removing the Debate component resulted in a 4\% performance drop across two benchmark datasets, significantly greater than the 2\% drop observed when the Reflection component was removed. These findings strongly demonstrate the critical role of Debate in enhancing framework performance, while also highlighting the auxiliary contribution of reflexion to overall optimization.

Augmenting large language models (LLMs) with external tools has emerged as a promising approach to extend their utility, empowering them to solve practical tasks. Existing work typically empowers LLMs as tool users with a manually designed workflow, where the LLM plans a series of tools in a step-by-step manner, and sequentially executes each tool to obtain intermediate results until deriving the final answer. However, they suffer from two challenges in realistic scenarios: (1) The handcrafted control flow is often ad-hoc and constraints the LLM to local planning; (2) The LLM is instructed to use only manually demonstrated tools or well-trained Python functions, which limits its generalization to new tools. In this work, we first propose Automatic Tool Chain (ATC), a framework that enables the LLM to act as a multi-tool user, which directly utilizes a chain of tools through programming. To scale up the scope of the tools, we next propose a black-box probing method. This further empowers the LLM as a tool learner that can actively discover and document tool usages, teaching themselves to properly master new tools. For a comprehensive evaluation, we build a challenging benchmark named ToolFlow, which diverges from previous benchmarks by its long-term planning scenarios and complex toolset. Experiments on both existing datasets and ToolFlow illustrate the superiority of our framework. Analysis on different settings also validates the effectiveness and the utility of our black-box probing algorithm.

Terminal agents are increasingly deployed beyond software engineering in science and other specialized domains. Constructing training environments requires executable reference behavior and a domain-specific verifier that distinguishes semantic correctness from superficially plausible artifacts. Authoring these components for each task requires repeated engineering and limits reuse. We introduce software-in-the-loop reconstruction, a self-supervised framework that obtains reference outputs and verification targets from existing software workflows, executable programs mapping structured inputs to outputs. For each workflow, we execute multiple input configurations and partition cases into public observations and hidden evaluations. Given the instruction, input schema, and public input--output observations, an agent constructs an editable program without access to the source workflow. The candidate is evaluated on hidden configurations against workflow outputs. A hierarchical verifier combines domain-specific semantic comparison, structural validity, and anti-shortcut checks, while public feedback supports iterative revision. The construction admits additional workflows and configurations without authoring a reference solution for each task. We instantiate SWR with 500 workflows and 46 software families across six domains. Across three attempts per task, Qwen3.8-Max solves 838 tasks and produces 1,422 verified trajectories, which we oversample to 3,000 reconstruction-only training examples. Supervised fine-tuning of Qwen3.8-27B improves mean Terminal-Bench 2 performance from 47.94% to 53.56% across three seeds and achieves the highest mean among four matched-token corpus controls on all four reported evaluations. These results indicate that existing scientific software can provide scalable, behaviorally verified supervision for terminal agents.

Large language model (LLM) agents are increasingly expected to operate in enterprise environments, where work is distributed across specialized roles, permission-controlled systems, and cross-departmental procedures. However, existing enterprise benchmarks largely evaluate single agents with broad tool access, while existing multi-agent benchmarks rarely capture realistic enterprise constraints such as role specialization, access control, stateful business systems, and policy-based approvals. We introduce EntCollabBench, a benchmark for evaluating enterprise multi-agent collaboration. EntCollabBench simulates a permission-isolated organization with 11 role-specialized agents across six departments and contains two evaluation subsets: a Workflow subset, where agents collaboratively modify enterprise system states, and an Approval subset, where agents make policy-grounded decisions. Evaluation is based on execution traces, database state verification, and deterministic policy adjudication rather than natural-language response judging. Experiments with representative LLM agents show that current models still struggle with end-to-end enterprise collaboration, especially in delegation, context transfer, parameter grounding, workflow closure, and decision commitment. EntCollabBench provides a reproducible testbed for measuring and improving agent systems intended for realistic organizational environments.

Work agents operate over digital artifacts to execute professional knowledge-intensive work, requiring training environments that support long-horizon interaction and trustworthy verification. However, hand-crafted environments incur prohibitive engineering overhead that prevents environment scaling, whereas synthesis methods sacrifice workspace complexity, realism, or grounded verifiability. To bridge this gap, we introduce WorkForge, a scalable synthesis framework for constructing verifiable work-agent environments from real-world resources. Starting from expert workflows, WorkForge first identifies the resources, decisions, and deliverables required by each workflow. It then retrieves relevant real-world files and organizes them into a workspace. WorkForge inspects the workspace to extract concrete, checkable facts about its content. These factual anchors fix which task types the workspace can support and how their outcomes can be verified. Therefore, WorkForge derives each task's instructions, solution plan, and complementary programmatic and semantic verifiers directly from these factual anchors, keeping verification traceable to observable workspace evidence. Furthermore, we construct 16.7K verifiable environments across 40 professional domains, with workspaces collectively covering 60 file types. Post-training Qwen3.5-35B-A3B-Base improves GDPVal from 45.5 to 73.6 and APEX Score from 5.0 to 21.3, while enabling Qwen3.5-27B to achieve highly competitive performance and outperform strong competitors. Our analyses confirm the efficacy of the proposed method and reveal consistent scaling behaviors across both data volume and interaction horizons.

Large language model (LLM) agents are increasingly used to assist with operations research (OR) modeling, yet existing OR-oriented benchmarks often reduce evaluation to one-shot translation from a self-contained problem statement into a mathematical formulation or solver program. Such settings abstract away two characteristics of real industrial OR workflows: persistent multi-artifact workspaces and multi-stage task lifecycles. We introduce OR-Space, a full-lifecycle workspace benchmark for evaluating industrial optimization agents across model construction, model revision, and grounded explanation. Each instance is an executable workspace containing business documents, structured data, optional code artifacts, solver outputs, and task-specific evaluators distributed across interdependent files. OR-Space defines three task modes: Build, where agents construct solver-ready optimization models from heterogeneous artifacts; Revise, where agents modify existing models under changing requirements or solver feedback while preserving valid prior logic; and Explain, where agents answer grounded questions about solutions, constraints, and business implications using evidence spread across workspace artifacts. By combining persistent workspaces with lifecycle-oriented tasks, OR-Space evaluates whether agents can perform reliable optimization work beyond end-to-end text generation. We describe the benchmark design, evaluation protocol, and quality-control pipeline, and position OR-Space as a benchmark for studying the reliability, failure modes, and practical readiness of LLM agents in industrial OR workflows.

While current Computer Use Agent (CUA) benchmarks measure task completion effectively, they provide limited assessment of enterprise deployment readiness, emphasizing functional correctness over the operational reliability required for production systems. We present UI-CUBE (UiPath Computer Use BEnchmark), a systematic benchmark comprising 226 tasks across two difficulty tiers designed to expose fundamental architectural limitations in current CUAs. Our evaluation covers simple UI interactions (136 tasks) and complex workflows including copy-paste tasks (50 tasks) and enterprise application scenarios (40 tasks), with systematic interface variation coverage, multi-resolution testing and automated validation of task success through the application state. Evaluation of five state-of-the-art models reveals a sharp capability cliff rather than gradual performance degradation. Simple UI interactions achieve 67-85% success rates (compared to 97.9% human performance), but complex workflows drop precipitously to 9-19%. Human evaluators with no prior application experience achieve only 61.2% on complex tasks despite near-perfect performance on simple tasks, establishing realistic performance ceilings. This discontinuous performance pattern -- where agents achieve 68-87% of human performance on simple tasks but only 15-32% on complex workflows -- indicates fundamental architectural limitations in memory management, hierarchical planning, and state coordination rather than incremental capability gaps addressable through better training or prompting. UI-CUBE functions as an enterprise-readiness diagnostic, revealing that while current CUAs can manipulate individual interface elements, they cannot yet function as reliable workflow automation tools. These findings provide architectural insights essential for developing production-ready CUAs capable of managing complex, multi-step enterprise processes.

Automatic workflow generation is the process of automatically synthesizing sequences of LLM calls, tool invocations, and post-processing steps for complex end-to-end tasks. Most prior methods cast this task as an optimization problem with limited theoretical grounding. We propose to cast workflow generation as Bayesian inference over a posterior distribution on workflows, and introduce Bayesian Workflow Generation (BWG), a sampling framework that builds workflows step-by-step using parallel look-ahead rollouts for importance weighting and a sequential in-loop refiner for pool-wide improvements. We prove that, without the refiner, the weighted empirical distribution converges to the target posterior. We instantiate BWG as BayesFlow, a training-free algorithm for workflow construction. Across six benchmark datasets, BayesFlow improves accuracy by up to 9 percentage points over SOTA workflow generation baselines and by up to 65 percentage points over zero-shot prompting, establishing BWG as a principled upgrade to search-based workflow design. Code will be available on https://github.com/BoYuanVisionary/BayesFlow.

The evaluation of coding agents generally strives to be as realistic as possible. In our study, we collect 4,782 agent sessions of real software engineers in JetBrains IDEs, which we call Production Sessions. Since our subject is interactive agents, we study the sessions with at least three user messages (33% of the sample). These long sessions differ from issue-derived benchmark tasks in two ways: (i) user requests span a far wider mix of task types - questions about the project's code, planning, review, refactoring, execution - and (ii) users switch between types throughout a session. Long-session samples from three public interaction corpora exhibit markedly different Task Flows (the distributions of session lengths, task types, and type-to-type transitions), so no single interaction distribution is universally realistic: benchmarks should name a target use case and calibrate to measurements from it. We present SWE-TaskFlow, an approach for transforming any issue-derived benchmark: it preserves the verified tasks and tests while steering the interaction toward a target Task Flow through prompt splitting and verifiable repository QA, with a TaskFlow Alignment Score (TFAS) for selecting among generated trajectories. In a pilot on 700 SWE-Bench Pro tasks, solving the task sequentially in several steps approximately doubles agent cost without a stable change in resolve rate: the interaction protocol itself is an important dimension of evaluation.

This paper introduces Workflow Intention, a novel framework for identifying and encoding process objectives within complex business environments. Workflow Intention is the alignment of Input, Process and Output elements defining a Workflow's transformation objective interpreted from Workflow Signal inside Business Artefacts. It specifies how Input is processed to achieve desired Output, incorporating quality standards, business rules, compliance requirements and constraints. We adopt an end-to-end Business Artefact Encoder and Workflow Signal interpretation methodology involving four steps: Modality-Specific Encoding, Intra-Modality Attention, Inter-Modality Fusion Attention then Intention Decoding. We provide training procedures and critical loss function definitions. In this paper we introduce the concepts of Workflow Signal and Workflow Intention, where Workflow Signal decomposed into Input, Process and Output elements is interpreted from Business Artefacts, and Workflow Intention is a complete triple of these elements. We introduce a mathematical framework for representing Workflow Signal as a vector and Workflow Intention as a tensor, formalizing properties of these objects. Finally, we propose a modular, scalable, trainable, attention-based multimodal generative system to resolve Workflow Intention from Business Artefacts.

Automated research systems support literature synthesis, ideation, experiments, writing, and peer review, but their evaluation is dispersed across tasks, benchmarks, and studies that are difficult to compare directly. We review this literature from the perspective of evaluation design and evidence, covering six targets: literature synthesis, research ideation, executable workflows, scholarly writing and communication, automatic peer review, and end-to-end research. We compare task construction, evidence sources, evaluators, and scoring procedures to explain the capabilities assessed by different designs. Our synthesis highlights three recurring lessons: output checks, process checks, and human studies provide complementary information; evaluator calibration is specific to the property being assessed; and resource budgets and attempt selection are integral to interpreting performance comparisons. We identify diagnostic evaluation designs and documented gaps in supporting evidence, and translate these comparisons into reporting and audit recommendations for specific evaluation settings. The survey helps readers navigate existing evaluations, select appropriate benchmarks, and design subsequent studies.

Business process automation (BPA) that leverages Large Language Models (LLMs) to convert natural language (NL) instructions into structured business process artifacts is becoming a hot research topic. This paper makes two technical contributions -- (i) FLOW-BENCH, a high quality dataset of paired natural language instructions and structured business process definitions to evaluate NL-based BPA tools, and support bourgeoning research in this area, and (ii) FLOW-GEN, our approach to utilize LLMs to translate natural language into an intermediate representation with Python syntax that facilitates final conversion into widely adopted business process definition languages, such as BPMN and DMN. We bootstrap FLOW-BENCH by demonstrating how it can be used to evaluate the components of FLOW-GEN across eight LLMs of varying sizes. We hope that FLOW-GEN and FLOW-BENCH catalyze further research in BPA making it more accessible to novice and expert users.

Full-duplex voice agents can now listen, speak, use tools, and act during spoken interactions, but fluent dialogue does not guarantee correct completion of delegated professional workflows. We introduce APEX-Voice, a benchmark of 120 interactive professional workflows spanning ten work archetypes such as form completion, corporate negotiation, coordination, consulting, and interviewing. Each workflow executes in a stateful Voice Workbench environment with task-specific knowledge, typed tools, gold-annotated final work artifact, authorization constraints, and a user simulation policy backed by validated, pre-compiled speech realizations. We evaluate both artifact field accuracy and end-to-end workflow success, which requires the correct terminal state, valid process, completed actions, and a valid final artifact. Across five frontier real-time voice agents-GPT-Live-1, Gemini-3.8-Live, Grok-Voice-Think-2.0, Step-Audio3, and GPT-realtime-2.1, none exceeds 25% Pass@1, and the best Reliable@3 is only 10.8%. Moreover, stateful coordination is the dominant failure point across systems, while success decreases further on workflows requiring greater knowledge retrieval and mid-speech corrections. Overall, APEX-Voice is the first benchmark for evaluating whether voice agents can translate conversational competence into dependable professional work.

Robotic Process Automation (RPA) systems face challenges in handling complex processes and diverse screen layouts that require advanced human-like decision-making capabilities. These systems typically rely on pixel-level encoding through drag-and-drop or automation frameworks such as Selenium to create navigation workflows, rather than visual understanding of screen elements. In this context, we present SmartFlow, an AI-based RPA system that uses pre-trained large language models (LLMs) coupled with deep-learning based image understanding. Our system can adapt to new scenarios, including changes in the user interface and variations in input data, without the need for human intervention. SmartFlow uses computer vision and natural language processing to perceive visible elements on the graphical user interface (GUI) and convert them into a textual representation. This information is then utilized by LLMs to generate a sequence of actions that are executed by a scripting engine to complete an assigned task. To assess the effectiveness of SmartFlow, we have developed a dataset that includes a set of generic enterprise applications with diverse layouts, which we are releasing for research use. Our evaluations on this dataset demonstrate that SmartFlow exhibits robustness across different layouts and applications. SmartFlow can automate a wide range of business processes such as form filling, customer service, invoice processing, and back-office operations. SmartFlow can thus assist organizations in enhancing productivity by automating an even larger fraction of screen-based workflows. The demo-video and dataset are available at https://smartflow-4c5a0a.webflow.io/.

Analyzing Open Source Intelligence (OSINT) from large volumes of data is critical for drafting and publishing comprehensive CTI reports. This process usually follows a three-stage workflow -- triage, deep search and TI drafting. While Large Language Models (LLMs) offer a promising route toward automation, existing benchmarks still have limitations. These benchmarks often consist of tasks that do not reflect real-world analyst workflows. For example, human analysts rarely receive tasks in the form of multiple-choice questions. Also, existing benchmarks often rely on model-centric metrics that emphasize lexical overlap rather than actionable, detailed insights essential for security analysts. Moreover, they typically fail to cover the complete three-stage workflow. To address these issues, we introduce CyberThreat-Eval, which is collected from the daily CTI workflow of a world-leading company. This expert-annotated benchmark assesses LLMs on practical tasks across all three stages as mentioned above. It utilizes analyst-centric metrics that measure factual accuracy, content quality, and operational costs. Our evaluation using this benchmark reveals important insights into the limitations of current LLMs. For example, LLMs often lack the nuanced expertise required to handle complex details and struggle to distinguish between correct and incorrect information. To address these challenges, the CTI workflow incorporates both external ground-truth databases and human expert knowledge. TRA allows human experts to iteratively provide feedback for continuous improvement. The code is available at https://github.com/xschen-beb/CyberThreat-Eval{GitHub} and https://huggingface.co/datasets/xse/CyberThreat-Eval{HuggingFace}.

The practical use of text-to-image generation has evolved from simple, monolithic models to complex workflows that combine multiple specialized components. While workflow-based approaches can lead to improved image quality, crafting effective workflows requires significant expertise, owing to the large number of available components, their complex inter-dependence, and their dependence on the generation prompt. Here, we introduce the novel task of prompt-adaptive workflow generation, where the goal is to automatically tailor a workflow to each user prompt. We propose two LLM-based approaches to tackle this task: a tuning-based method that learns from user-preference data, and a training-free method that uses the LLM to select existing flows. Both approaches lead to improved image quality when compared to monolithic models or generic, prompt-independent workflows. Our work shows that prompt-dependent flow prediction offers a new pathway to improving text-to-image generation quality, complementing existing research directions in the field.

Existing AI benchmarks for software automation rarely combine cross-application coordination, autonomous API discovery, and policy adherence. Real business workflows demand all three: a single task may span a CRM, inbox, calendar, and messaging platform - requiring the agent to find the right endpoints, follow a policy document, and write correct data to each system. To address this gap, we introduce AutomationBench, a benchmark for evaluating AI agents on cross-application workflow orchestration via REST APIs. Drawing on real workflow patterns from Zapier's platform, tasks span Sales, Marketing, Operations, Support, Finance, and HR domains. Agents must discover relevant endpoints themselves, follow layered business rules, and navigate environments with irrelevant and sometimes misleading records. Grading is programmatic and end-state only: whether the correct data ended up in the right systems. Even the best frontier models currently score below 10%. AutomationBench provides a challenging, realistic measure of where current models stand relative to the agentic capabilities businesses actually need.

Scientific literature search often requires more than retrieving papers from a single query: users' intents are underspecified, preference-dependent, and evolve through interaction. Existing search agents typically rely on fixed pipelines or implicit language-only reasoning, making their search strategies difficult to control, inspect, and refine. We introduce PaperPilot, a multi-turn literature search agent that frames scientific search as workflow induction. Given an anchor paper and a user query, PaperPilot constructs an executable DAG of paper-search operators, including keyword search, citation expansion, filtering, scoring, reranking, and evidence extraction. User feedback is then used to refine both the query and the workflow itself. We train PaperPilot with supervised workflow imitation and preference optimization over controlled workflow corruptions. Experiments show that PaperPilot-9B improves over the base Qwen3.5-9B toolset agent under multi-turn interaction, increasing Hit@5 from 58.0 to 77.0, MRR from 47.5 to 59.4, and nDCG@10 from 26.8 to 32.5, while reducing workflow execution errors from 9.5% to 0%. These results show that explicit, editable search workflows provide an effective and controllable interface for aligning literature search agents with complex scientific intent.

Web agents act through long interaction sequences, yet existing benchmarks evaluate only terminal success, discarding all process information and offering little guidance on improvement. In this work, we conduct a process-level analysis of web agents. We introduce WebStep, a benchmark of 1,800 task instances with controlled difficulty and automatic semantic state tracking. Each website exposes a deterministic semantic MDP alongside the GUI: the agent operates on the interface, while the environment records high-level states and transitions in the background, enabling fine-grained analysis without manual annotation. Based on the semantic trajectory, we first show that process metrics reveal differences invisible to outcome evaluation: three agents whose success rates cluster within 31-33% diverge in exploration reach versus execution accuracy. Then, decomposing by skill characterizes the nature of these differences, exposing opposite per-skill rankings hidden within the same website: e.g., on Housing, OpenAI CUA outperforms Qwen3.5 by 23.7% on commit actions yet underperforms it by 15.6% on filtering, pinpointing a concrete skill to improve even within a domain. Bifurcation analysis further localizes the decisive error that loses the task and shows that this error is agent-specific rather than shared. Finally, these differences widen as tasks grow harder: success rate is similar on easy tasks but separates sharply as exploration becomes more demanding. Our process-level analysis opens a new avenue in web agent evaluation, providing fine-grained and actionable insight into where and how each agent should be improved.

Recruitment applications span diverse operations, from drafting job descriptions and interpreting queries to organizing profiles, assessing fit, and recommending candidates and jobs. Systematic LLM evaluation therefore requires task coverage that reflects this range of business needs. We introduce EHR-Bench, an open Chinese benchmark comprising twelve tasks across six capability families and five recruitment scenarios. The tasks cover generation, extraction, classification, retrieval, semantic similarity, and reciprocal ranking within one evaluation framework. An internal recruitment dataset guides task definitions, the occupation taxonomy and sampling targets, output requirements, and scoring protocols. Following these specifications, we construct 8,336 task instances from public materials and controlled augmentation, with source-aware expert review and documented provenance. We evaluate twelve LLMs through task-level, capability-level, and aggregate comparisons. Closely ranked models exhibit distinct task strengths, and performance varies across input sources, reference evidence, and candidate pools. Five shared models retain the same observed Overall ordering on a private operational reference, with variation in capability and task correspondence. EHR-Bench provides a reproducible foundation for systematic model assessment, task-specific model selection, and further research on LLMs for recruitment. The project repository is available at https://github.com/EhrBench/EHR-Bench.

Recent multi-agent frameworks built upon large language models (LLMs) have demonstrated remarkable capabilities in complex task planning. However, in real-world enterprise environments, business workflows are typically composed through modularization and reuse of numerous subprocesses, resulting in intricate workflows characterized by lengthy and deeply nested execution paths. Such complexity poses significant challenges for LLM-driven orchestration, as extended reasoning chains and state-space explosions severely impact planning effectiveness and the proper sequencing of tool invocations. Therefore, developing an orchestration method with controllable structures capable of handling multi-layer nesting becomes a critical issue. To address this, we propose a novel structure-driven orchestration framework Self-Organizing Agent Network (SOAN). SOAN incrementally builds a formalized agent network by identifying and encapsulating structural units as independent agents, enhancing modularity and clarity in orchestration. Extensive evaluations were performed using multiple benchmarks as well as a real-world enterprise workflow dataset. Experimental results demonstrate that SOAN significantly outperforms state-of-the-art methods in terms of adaptability, fault tolerance, and execution efficiency.

We present Auto-BenchmarkCard, a workflow for generating validated descriptions of AI benchmarks. Benchmark documentation is often incomplete or inconsistent, making it difficult to interpret and compare benchmarks across tasks or domains. Auto-BenchmarkCard addresses this gap by combining multi-agent data extraction from heterogeneous sources (e.g., Hugging Face, Unitxt, academic papers) with LLM-driven synthesis. A validation phase evaluates factual accuracy through atomic entailment scoring using the FactReasoner tool. This workflow has the potential to promote transparency, comparability, and reusability in AI benchmark reporting, enabling researchers and practitioners to better navigate and evaluate benchmark choices.

The development of general-purpose agents requires a shift from executing simple instructions to completing complex, real-world productivity workflows. However, current tool-use benchmarks remain misaligned with real-world requirements, relying on AI-generated queries, dummy tools, and limited system-level coordination. To address this, we propose GTA-2, a hierarchical benchmark for General Tool Agents (GTA) spanning atomic tool use and open-ended workflows. Built on real-world authenticity, it leverages real user queries, deployed tools, and multimodal contexts. (i) GTA-Atomic, inherited from our prior GTA benchmark, evaluates short-horizon, closed-ended tool-use precision. (ii) GTA-Workflow introduces long-horizon, open-ended tasks for realistic end-to-end completion. To evaluate open-ended deliverables, we propose a recursive checkpoint-based evaluation mechanism that decomposes objectives into verifiable sub-goals, enabling unified evaluation of both model capabilities and agent execution frameworks (i.e., execution harnesses). Experiments reveal a pronounced capability cliff: while frontier models already struggle on atomic tasks (below 50%), they largely fail on workflows, with top models achieving only 14.39% success. Further analysis shows that checkpoint-guided feedback improves performance, while advanced frameworks such as Manus and OpenClaw substantially enhance workflow completion, highlighting the importance of execution harness design beyond the underlying model capacity. These findings provide guidance for developing reliable personal and professional assistants. Dataset and code will be available at https://github.com/open-compass/GTA.

WANDR (Wide ANd Deep Research) is a benchmark of 500 realistic, challenging data-collection tasks for research agents. Each task requires a system to discover a large set of entities that satisfy specified criteria (breadth), investigate each entity through multiple coordinated web searches (depth), and return independently verifiable records with supporting sources and excerpts. Tasks are represented as qualification key hierarchies that specify the entities, relationships, evidence, and required count at each level; a hierarchy with n companies, m employees per company, and k sources per employee requires n x m x k records. This structure supports diverse workflows such as market mapping, due diligence, literature review, product comparison, and talent sourcing, with targets ranging from dozens to thousands of records. WANDR replaces static gold answer sets with task-specific judges that refetch cited pages and verify each record against its evidence, allowing evaluation of current and changing facts. Record verdicts are aggregated into soft and hard precision, recall, and F1 scores that distinguish factual quality, coverage, and hierarchical completeness. The tasks are derived from de-identified product-usage logs and produced through a semi-automated pipeline with automated checks, empirical audits, and human review where needed. We evaluate six production research systems and find that the benchmark is far from saturated: at high effort, the strongest system reaches only 0.363 soft F1 and 0.133 hard F1. Performance degrades as target volume and hierarchy depth increase, with incomplete discovery, missing enrichment, and incomplete evidence construction remaining major bottlenecks. The benchmark and evaluation harness are available at https://github.com/perplexityai/wandr.

Agentic workflows -- where multiple large language model (LLM) instances interact to solve tasks -- are increasingly built on feedback mechanisms, where one model evaluates and critiques another. Despite the promise of feedback-driven improvement, the stability of agentic workflows rests on the reliability of the judge. However, judges may hallucinate information, exhibit bias, or act adversarially -- introducing critical vulnerabilities into the workflow. In this work, we present a systematic analysis of agentic workflows under deceptive or misleading feedback. We introduce a two-dimensional framework for analyzing judge behavior, along axes of intent (from constructive to malicious) and knowledge (from parametric-only to retrieval-augmented systems). Using this taxonomy, we construct a suite of judge behaviors and develop WAFER-QA, a new benchmark with critiques grounded in retrieved web evidence to evaluate robustness of agentic workflows against factually supported adversarial feedback. We reveal that even strongest agents are vulnerable to persuasive yet flawed critiques -- often switching correct answers after a single round of misleading feedback. Taking a step further, we study how model predictions evolve over multiple rounds of interaction, revealing distinct behavioral patterns between reasoning and non-reasoning models. Our findings highlight fundamental vulnerabilities in feedback-based workflows and offer guidance for building more robust agentic systems.

Multi-agent frameworks powered by large language models (LLMs) have demonstrated great success in automated planning and task execution. However, the effective adjustment of Agentic workflows during execution has not been well-studied. A effective workflow adjustment is crucial, as in many real-world scenarios, the initial plan must adjust to unforeseen challenges and changing conditions in real-time to ensure the efficient execution of complex tasks. In this paper, we define workflows as an activity-on-vertex (AOV) graphs. We continuously refine the workflow by dynamically adjusting task allocations based on historical performance and previous AOV with LLM agents. To further enhance system performance, we emphasize modularity in workflow design based on measuring parallelism and dependence complexity. Our proposed multi-agent framework achieved efficient sub-task concurrent execution, goal achievement, and error tolerance. Empirical results across different practical tasks demonstrate dramatic improvements in the efficiency of multi-agent frameworks through dynamic workflow updating and modularization.

Automating enterprise workflows could unlock $4 trillion/year in productivity gains. Despite being of interest to the data management community for decades, the ultimate vision of end-to-end workflow automation has remained elusive. Current solutions rely on process mining and robotic process automation (RPA), in which a bot is hard-coded to follow a set of predefined rules for completing a workflow. Through case studies of a hospital and large B2B enterprise, we find that the adoption of RPA has been inhibited by high set-up costs (12-18 months), unreliable execution (60% initial accuracy), and burdensome maintenance (requiring multiple FTEs). Multimodal foundation models (FMs) such as GPT-4 offer a promising new approach for end-to-end workflow automation given their generalized reasoning and planning abilities. To study these capabilities we propose ECLAIR, a system to automate enterprise workflows with minimal human supervision. We conduct initial experiments showing that multimodal FMs can address the limitations of traditional RPA with (1) near-human-level understanding of workflows (93% accuracy on a workflow understanding task) and (2) instant set-up with minimal technical barrier (based solely on a natural language description of a workflow, ECLAIR achieves end-to-end completion rates of 40%). We identify human-AI collaboration, validation, and self-improvement as open challenges, and suggest ways they can be solved with data management techniques. Code is available at: https://github.com/HazyResearch/eclair-agents

Artificial intelligence systems are increasingly deployed in biomedical research. However, current evaluation frameworks may inadequately assess their effectiveness as research collaborators. This rapid review examines benchmarking practices for AI systems in preclinical biomedical research. Three major databases and two preprint servers were searched from January 1, 2018 to October 31, 2025, identifying 14 benchmarks that assess AI capabilities in literature understanding, experimental design, and hypothesis generation. The results revealed that all current benchmarks assess isolated component capabilities, including data analysis quality, hypothesis validity, and experimental protocol design. However, authentic research collaboration requires integrated workflows spanning multiple sessions, with contextual memory, adaptive dialogue, and constraint propagation. This gap implies that systems excelling on component benchmarks may fail as practical research co-pilots. A process-oriented evaluation framework is proposed that addresses four critical dimensions absent from current benchmarks: dialogue quality, workflow orchestration, session continuity, and researcher experience. These dimensions are essential for evaluating AI systems as research co-pilots rather than as isolated task executors.

Trustworthy deployment of LLM-based agents in software systems requires evaluating how they perform on application-specific workflows, with enough granularity to localize where they succeed and fail. Yet existing agent evaluation mechanisms are limited: benchmarks have low construct validity for application-specific workflows and environments, and replica evaluation environments are expensive and prone to drift. We propose Copy-on-Write (CoW) Scoring, a framework that evaluates agent operations directly within application environments using a PostgreSQL-level Copy-on-Write mechanism to isolate agent writes. CoW Scoring produces session- and operation-level scores that highlight where agents' database write operations succeed and fail in a given application environment, enabling inexpensive evaluation and iteration on agent harnesses and tool surfaces. We demonstrate the framework on Plane, an open-source project-management platform, where analysis surfaced specific issues in the tool surface, and corresponding fixes produced measurable improvements on affected models. Python library: https://github.com/trail-ml/agent-cow-python

Despite the rapid progress of Multimodal Large Language Models (MLLMs), their ability to perform reliable visual grounding in high-stakes clinical software environments remains underexplored. Existing GUI benchmarks largely focus on isolated, single-step grounding queries, overlooking the sequential, workflow-driven reasoning required in real-world medical interfaces, where tasks evolve across independent steps and dynamic interface states. We introduce MedSPOT, a workflow-aware sequential grounding benchmark for clinical GUI environments. Unlike prior benchmarks that treat grounding as a standalone prediction task, MedSPOT models procedural interaction as a sequence of structured spatial decisions. The benchmark comprises 216 task-driven videos with 597 annotated keyframes, in which each task consists of 2 to 3 interdependent grounding steps within realistic medical workflows. This design captures interface hierarchies, contextual dependencies, and fine-grained spatial precision under evolving conditions. To evaluate procedural robustness, we propose a strict sequential evaluation protocol that terminates task assessment upon the first incorrect grounding prediction, explicitly measuring error propagation in multi-step workflows. We further introduce a comprehensive failure taxonomy, including edge bias, small-target errors, no prediction, near miss, far miss, and toolbar confusion, to enable systematic diagnosis of model behavior in clinical GUI settings. By shifting evaluation from isolated grounding to workflow-aware sequential reasoning, MedSPOT establishes a realistic and safety-critical benchmark for assessing multimodal models in medical software environments. Code and data are available at: https://github.com/Tajamul21/MedSPOT.

Large Language Models (LLMs) have shown impressive capabilities in downstream software engineering tasks such as Automated Program Repair (APR). In particular, there has been a lot of research on repository-level issue-resolution benchmarks such as SWE-Bench. Although there has been significant progress on this topic, we notice that in the process of solving such issues, existing agentic systems tend to hyper-localize on immediately suspicious lines of code and fix them in isolation, without a deeper understanding of the issue semantics, code semantics, or execution semantics. Consequently, many existing systems generate patches that overfit to the user issue, even when a more general fix is preferable. To address this limitation, we introduce SemAgent, a novel workflow-based procedure that leverages issue, code, and execution semantics to generate patches that are complete - identifying and fixing all lines relevant to the issue. We achieve this through a novel pipeline that (a) leverages execution semantics to retrieve relevant context, (b) comprehends issue-semantics via generalized abstraction, (c) isolates code-semantics within the context of this abstraction, and (d) leverages this understanding in a two-stage architecture: a repair stage that proposes fine-grained fixes, followed by a reviewer stage that filters relevant fixes based on the inferred issue-semantics. Our evaluations show that our methodology achieves a solve rate of 44.66% on the SWEBench-Lite benchmark beating all other workflow-based approaches, and an absolute improvement of 7.66% compared to our baseline, which lacks such deep semantic understanding. We note that our approach performs particularly well on issues requiring multi-line reasoning (and editing) and edge-case handling, suggesting that incorporating issue and code semantics into APR pipelines can lead to robust and semantically consistent repairs.

Evaluation harnesses are software systems that orchestrate model evaluation by managing model invocation, data loading, metric computation, and result reporting. Despite their critical role in machine learning infrastructure, their operational challenges and engineering concerns have received limited attention so far. We present an empirical study of 57 evaluation harnesses, deriving a five-stage harness model and classifying 16,560 issues by workflow stage and root cause. Most harness operational challenges concentrate in the Specification stage (41.4% of issues), where harnesses integrate external models, datasets, and scoring judges. The three most frequent root causes of operational challenges are unimplemented features (24.3%), documentation gaps (20.3%), and missing input validation (17.2%), which together account for 61.7% of classified issues, spanning both defects in existing functionality and capability gaps that block intended workflows. Root causes also vary by workflow stage: environment incompatibility and external dependency breakage account for 36.2% of provisioning issues, whereas algorithmic error (25.9%) and validation gap (22.5%) dominate assessment issues. Together, these contributions establish an empirical foundation for treating evaluation engineering as a distinct software engineering concern.

Enterprise agents face safety risks that cannot be determined from individual actions alone. Existing safety benchmarks largely evaluate action-local risks, overlooking failures whose safety depends on workflow state. In such state-dependent risks, the same action may be safe in one context but violate policy in another. Hence, we introduce LatentRiskBench for evaluating such state-dependent risks in enterprise settings. It pairs risky trajectories with benign counterparts that share the same terminal action but differ in latent policy-relevant states, requiring models to reconstruct workflow context rather than rely on action-level cues. We also introduce new metrics for state-dependent risk evaluation, including a suite of residual risk (RR) measures. Experiments on the benchmark show that action-level evaluation detects only 0.09 of state-dependent violations, whereas state-level evaluation reaches 0.96. Existing guardrail methods largely overlook such risks unless they are explicitly applied to workflow states. Case studies on a commercial deployed scenario further show that the safety metrics embedded in the benchmark provide a more realistic measure of safety for enterprise agents. Our dataset and code are available at https://github.com/JingyueCong/LatentRiskBench.

Recent years have witnessed the rapid evolution of AI agents toward handling increasingly complex, real-world tasks. However, existing benchmarks rarely evaluate whether agents can operate graphical user interfaces to complete long-horizon, high-value professional workflows across diverse domains. Current GUI benchmarks still predominantly focus on general-purpose software, relatively simple applications, and short-horizon tasks, leaving it largely unknown whether modern agents can follow user instructions to autonomously operate domain-specific professional software and accomplish economically valuable work in an end-to-end manner. To bridge this gap, we introduce Workflow-GYM, a benchmark for long-horizon GUI tasks centered on professional domains and specialized software environments. Through extensive experiments on state-of-the-art models, we find that even the strongest models achieve only slightly above 30% success rates, highlighting that professional long-horizon GUI workflows remain highly challenging for current GUI agents. Further analysis reveals that current agents struggle to maintain long-horizon workflow consistency, frequently exhibiting workflow stage omission, error propagation, objective drift, and insufficient understanding of professional software environments. Our findings provide important insights into the limitations of current agent systems and suggest key directions for the next generation of GUI-agent research.

ComfyUI provides a widely-adopted, workflow-based interface that enables users to customize various image generation tasks through an intuitive node-based architecture. However, the intricate connections between nodes and diverse modules often present a steep learning curve for users. In this paper, we introduce ComfyGPT, the first self-optimizing multi-agent system designed to generate ComfyUI workflows based on task descriptions automatically. ComfyGPT comprises four specialized agents: ReformatAgent, FlowAgent, RefineAgent, and ExecuteAgent. The core innovation of ComfyGPT lies in two key aspects. First, it focuses on generating individual node links rather than entire workflows, significantly improving generation precision. Second, we proposed FlowAgent, a LLM-based workflow generation agent that uses both supervised fine-tuning (SFT) and reinforcement learning (RL) to improve workflow generation accuracy. Moreover, we introduce FlowDataset, a large-scale dataset containing 13,571 workflow-description pairs, and FlowBench, a comprehensive benchmark for evaluating workflow generation systems. We also propose four novel evaluation metrics: Format Validation (FV), Pass Accuracy (PA), Pass Instruct Alignment (PIA), and Pass Node Diversity (PND). Experimental results demonstrate that ComfyGPT significantly outperforms existing LLM-based methods in workflow generation.

While GUI agents have shown impressive capabilities in common computer-use tasks such as OSWorld, current benchmarks mainly focus on isolated and single-application tasks. This overlooks a critical real-world requirement of coordinating across multiple applications to accomplish complex profession-specific workflows. To bridge this gap, we present a computer-use benchmark in cross-application workflows, named WindowsWorld, designed to systematically assess GUI Agents on complex multi-step tasks that mirror real-world professional activities. Our methodology uses a multi-agent framework steered by 16 occupations to generate four difficulty-level tasks with intermediate inspection, which are then refined by human review and executed in a simulated environment. The resulting benchmark contains 181 tasks with an average of 5.0 sub-goals across 17 common desktop applications, of which 78% are inherently multi-application. Experimental results of leading large models and agents show that: 1) All computer-use agents perform poorly on multi-application tasks (< 21% success rate), far below the performance of simple single-app tasks; 2) They largely fail at tasks requiring conditional judgment and reasoning across geq 3 applications, stalling at early sub-goals; 3) Low execution efficiency, where tasks often fail despite far exceeding human step limits. Code, benchmark data, and evaluation resources are available at github.com/HITsz-TMG/WindowsWorld.

Text-to-SQL has recently achieved impressive progress, yet remains difficult to apply effectively in real-world scenarios. This gap stems from the reliance on single static workflows, fundamentally limiting scalability to out-of-distribution and long-tail scenarios. Instead of requiring users to select suitable methods through extensive experimentation, we attempt to enable systems to adaptively construct workflows at inference time. Through theoretical and empirical analysis, we demonstrate that optimal dynamic policies consistently outperform the best static workflow, with performance gains fundamentally driven by heterogeneity across candidate workflows. Motivated by this, we propose SquRL, a reinforcement learning framework that enhances LLMs' reasoning capability in adaptive workflow construction. We design a rule-based reward function and introduce two effective training mechanisms: dynamic actor masking to encourage broader exploration, and pseudo rewards to improve training efficiency. Experiments on widely-used Text-to-SQL benchmarks demonstrate that dynamic workflow construction consistently outperforms the best static workflow methods, with especially pronounced gains on complex and out-of-distribution queries. The codes are available at https://github.com/Satissss/SquRL

Evaluations (Evals) are a deployment bottleneck for real-world AI applications: public benchmarks rarely match a team's users, context, or policies, and human review is often tedious to scale. Motivated by our work with AI applications in the public sector, this project addresses recurring evaluation challenges encountered when applications must satisfy local policy and governance requirements. We present Kaleidoscope, an integrated workflow for contextual functional evaluation that links persona-based test generation, contextualized rubrics, and human review for reliability-gated automated scoring. Generated test cases are scored against application-specific rubrics; human annotations provide reviewable labels; and LLM judges automate scoring only when their agreement with those labels meets a configured threshold. Kaleidoscope is therefore a practical, inspectable, iterative workflow for product teams. We report early evidence from a three-week pilot across four organizational use cases and custom-rubric judge experiments on 108 annotated Q\&A pairs spanning four domains and 14 evaluation dimensions. The results highlight useful features for end-to-end reliable, automated scoring.

Large language model (LLM) agents have shown strong performance in long-horizon tasks that require planning, tool use, and interaction with external environments. However, most existing benchmarks implicitly assume a monolingual setting, where the entire execution process, including reasoning, tool invocation, and output generation, is conducted within a single language. In contrast, real-world applications often involve multilingual inputs and outputs within a unified workflow, yet the interaction between multilinguality and agentic execution remains underexplored. In this work, we introduce PolyWorkBench, a benchmark for evaluating LLM agents on multilingual long-horizon workplace workflows. PolyWorkBench consists of 67 tasks across five domains, including commerce, knowledge work, legal analysis, localization, and manufacturing, where agents must process heterogeneous multilingual inputs, perform iterative reasoning, invoke external tools, and produce structured outputs. To enable comprehensive evaluation, we propose a hybrid framework that combines structural grading, executable verification, and LLM-based semantic assessment. This design allows us to capture both functional correctness and linguistic consistency across complex workflows. Empirical results show that state-of-the-art LLM agents suffer significant performance degradation in multilingual workflow settings compared to monolingual counterparts. Our analysis suggests that multilinguality introduces compounding effects across reasoning and execution steps, highlighting the importance of jointly modeling language variation and procedural decision-making in agent evaluation.

While LLM-Based agents, which use external tools to solve complex problems, have made significant progress, benchmarking their ability is challenging, thereby hindering a clear understanding of their limitations. In this paper, we propose an interactive evaluation framework, named CIBench, to comprehensively assess LLMs' ability to utilize code interpreters for data science tasks. Our evaluation framework includes an evaluation dataset and two evaluation modes. The evaluation dataset is constructed using an LLM-human cooperative approach and simulates an authentic workflow by leveraging consecutive and interactive IPython sessions. The two evaluation modes assess LLMs' ability with and without human assistance. We conduct extensive experiments to analyze the ability of 24 LLMs on CIBench and provide valuable insights for future LLMs in code interpreter utilization.

With the deep integration of artificial intelligence and interactive technology, Graphical User Interface (GUI) Agent, as the carrier connecting goal-oriented natural language and real-world devices, has received widespread attention from the community. Contemporary benchmarks aim to evaluate the comprehensive capabilities of GUI agents in GUI operation tasks, generally determining task completion solely by inspecting the final screen state. However, GUI operation tasks consist of multiple chained steps while not all critical information is presented in the final few pages. Although a few research has begun to incorporate intermediate steps into evaluation, accurately and automatically capturing this process information still remains an open challenge. To address this weakness, we introduce ProBench, a comprehensive mobile benchmark with over 200 challenging GUI tasks covering widely-used scenarios. Remaining the traditional State-related Task evaluation, we extend our dataset to include Process-related Task and design a specialized evaluation method. A newly introduced Process Provider automatically supplies accurate process information, enabling presice assessment of agent's performance. Our evaluation of advanced GUI agents reveals significant limitations for real-world GUI scenarios. These shortcomings are prevalent across diverse models, including both large-scale generalist models and smaller, GUI-specific models. A detailed error analysis further exposes several universal problems, outlining concrete directions for future improvements.

The ability of large language models (LLMs) to mimic human-like intelligence has led to a surge in LLM-based autonomous agents. Though recent LLMs seem capable of planning and reasoning given user instructions, their effectiveness in applying these capabilities for autonomous task solving remains underexplored. This is especially true in enterprise settings, where automated agents hold the promise of a high impact. To fill this gap, we propose WorkArena++, a novel benchmark consisting of 682 tasks corresponding to realistic workflows routinely performed by knowledge workers. WorkArena++ is designed to evaluate the planning, problem-solving, logical/arithmetic reasoning, retrieval, and contextual understanding abilities of web agents. Our empirical studies across state-of-the-art LLMs and vision-language models (VLMs), as well as human workers, reveal several challenges for such models to serve as useful assistants in the workplace. In addition to the benchmark, we provide a mechanism to effortlessly generate thousands of ground-truth observation/action traces, which can be used for fine-tuning existing models. Overall, we expect this work to serve as a useful resource to help the community progress toward capable autonomous agents. The benchmark can be found at https://github.com/ServiceNow/WorkArena/tree/workarena-plus-plus.

A benchmark should deliver more than a scalar score: what makes an evaluation trustworthy is the reasoning that justifies the score. This is especially critical for world models, where judging a rollout requires understanding whether physics, causality, and world state evolve correctly. Humans spot such violations naturally, yet no existing benchmark automates this capability: metrics are computed brute-force, leaving no reasoning chain that can be examined or verified. We introduce HarnessEval-W, an agentified evaluation pipeline that brings the harness paradigm from the LLM ecosystem to world model benchmarking. Rather than applying a fixed rubric, HarnessEval-W interprets the context of each evaluation case, decomposes the evaluation question into measurable subproblems, and spawns specialized sub-agents, each equipped with tailored context and diagnostic tools to reason over its own subproblem. The parent agent then validates the gathered evidence and summarizes it into the final verdict. This hierarchical workflow turns every evaluation into a transparent evidence tree whose complete reasoning chain justifies the result. We apply HarnessEval-W to 18 representative world models over 330 evaluation cases. Its judgments closely align with human preferences while providing verifiable, fine-grained diagnoses of every generated rollout. We open-source the full pipeline as a live benchmark and invite the broad community to contribute to grow new skills and evaluation cases as world models evolve.

AI scientist systems, capable of autonomously executing the full research workflow from hypothesis generation and experimentation to paper writing, hold significant potential for accelerating scientific discovery. However, the internal workflow of these systems have not been closely examined. This lack of scrutiny poses a risk of introducing flaws that could undermine the integrity, reliability, and trustworthiness of their research outputs. In this paper, we identify four potential failure modes in contemporary AI scientist systems: inappropriate benchmark selection, data leakage, metric misuse, and post-hoc selection bias. To examine these risks, we design controlled experiments that isolate each failure mode while addressing challenges unique to evaluating AI scientist systems. Our assessment of two prominent open-source AI scientist systems reveals the presence of several failures, across a spectrum of severity, which can be easily overlooked in practice. Finally, we demonstrate that access to trace logs and code from the full automated workflow enables far more effective detection of such failures than examining the final paper alone. We thus recommend journals and conferences evaluating AI-generated research to mandate submission of these artifacts alongside the paper to ensure transparency, accountability, and reproducibility.

Like any other discipline, Large Language Models (LLMs) have significantly impacted software engineering by helping developers generate the required artifacts across various phases of software development. This paper presents a case study comparing the performance of popular LLMs GPT, Claude, Gemini, and DeepSeek in generating functional specifications that include use cases, business rules, and collaborative workflows for a web application, the Mess Management System. The study evaluated the quality of LLM generated use cases, business rules, and collaborative workflows in terms of their syntactic and semantic correctness, consistency, non ambiguity, and completeness compared to the reference specifications against the zero-shot prompted problem statement. Our results suggested that all four LLMs can specify syntactically and semantically correct, mostly non-ambiguous artifacts. Still, they may be inconsistent at times and may differ significantly in the completeness of the generated specification. Claude and Gemini generated all the reference use cases, with Claude achieving the most complete but somewhat redundant use case specifications. Similar results were obtained for specifying workflows. However, all four LLMs struggled to generate relevant Business Rules, with DeepSeek generating the most reference rules but with less completeness. Overall, Claude generated more complete specification artifacts, while Gemini was more precise in the specifications it generated.

We study the use of large language model-based agents for interacting with software via web browsers. Unlike prior work, we focus on measuring the agents' ability to perform tasks that span the typical daily work of knowledge workers utilizing enterprise software systems. To this end, we propose WorkArena, a remote-hosted benchmark of 29 tasks based on the widely-used ServiceNow platform. We also introduce BrowserGym, an environment for the design and evaluation of such agents, offering a rich set of actions as well as multimodal observations. Our empirical evaluation reveals that while current agents show promise on WorkArena, there remains a considerable gap towards achieving full task automation. Notably, our analysis uncovers a significant performance disparity between open and closed-source LLMs, highlighting a critical area for future exploration and development in the field.

Scientific research is being reshaped by AI systems that move beyond isolated assistance toward longer-horizon workflows spanning literature grounding, hypothesis generation, experimentation, validation, reporting, and revision. This shift marks a transition from task-level AI for science to workflow-level research automation. Yet current systems remain fragmented, differing in autonomy, domain scope, execution environment, validation mechanism, and human oversight, while still struggling with evidence preservation, reproducibility, weak-direction rejection, provenance tracking, cross-domain robustness, and accountable scientific closure. This survey examines these developments through AutoResearch, defined as the developmental spectrum of AI-powered scientific workflow automation. Within it, Vibe Research denotes the human-steered region of prompt-based assistance and human-verified execution, whereas emerging AI-led systems coordinate larger portions of the discovery loop without achieving robust autonomy. We analyze how research systems redistribute control, evidence, execution, validation, and accountability across workflows and organize the field around five workflow conditions: literature and research grounding; hypothesis formation and planning; experimentation and tool use; feedback, validation, and review; and reporting and knowledge communication. We further synthesize AI scientist systems, mixed-initiative co-research frameworks, benchmarks, domain deployments, and open-source infrastructures. Finally, we propose five evaluation dimensions--novelty, validity, impact, reliability, and provenance--and show that AutoResearch autonomy is domain-conditioned, being more credible in structured, executable, and rapidly verifiable settings but limited in embodied, delayed, heterogeneous, ethical, or institutionally accountable contexts.

Recent progress in deep research systems has been impressive, but evaluation still lags behind real user needs. Existing benchmarks predominantly assess final reports using fixed rubrics, failing to evaluate the underlying research process. Most also offer limited multimodal coverage, rely on synthetic tasks that do not reflect real-world query complexity, and cannot be refreshed as knowledge evolves. To address these gaps, we introduce MiroEval, a benchmark and evaluation framework for deep research systems. The benchmark comprises 100 tasks (70 text-only, 30 multimodal), all grounded in real user needs and constructed via a dual-path pipeline that supports periodic updates, enabling a live and evolving setting. The proposed evaluation suite assesses deep research systems along three complementary dimensions: adaptive synthesis quality evaluation with task-specific rubrics, agentic factuality verification via active retrieval and reasoning over both web sources and multimodal attachments, and process-centric evaluation audits how the system searches, reasons, and refines throughout its investigation. Evaluation across 13 systems yields three principal findings: the three evaluation dimensions capture complementary aspects of system capability, with each revealing distinct strengths and weaknesses across systems; process quality serves as a reliable predictor of overall outcome while revealing weaknesses invisible to output-level metrics; and multimodal tasks pose substantially greater challenges, with most systems declining by 3 to 10 points. The MiroThinker series achieves the most balanced performance, with MiroThinker-H1 ranking the highest overall in both settings. Human verification and robustness results confirm the reliability of the benchmark and evaluation framework. MiroEval provides a holistic diagnostic tool for the next generation of deep research agents.

The rapid deployment of AI agents in commercial settings has outpaced the development of evaluation methodologies that reflect production realities. Existing benchmarks measure agent capabilities through retrospectively curated tasks with well-specified requirements and deterministic metrics -- conditions that diverge fundamentally from production environments where requirements contain implicit constraints, inputs are heterogeneous multi-modal documents with information fragmented across sources, tasks demand undeclared domain expertise, outputs are long-horizon professional deliverables, and success is judged by domain experts whose standards evolve over time. We present AlphaEval, a production-grounded benchmark of 94 tasks sourced from seven companies deploying AI agents in their core business, spanning six O*NET (Occupational Information Network) domains. Unlike model-centric benchmarks, AlphaEval evaluates complete agent products -- Claude Code, Codex, etc. -- as commercial systems, capturing performance variations invisible to model-level evaluation. Our evaluation framework covers multiple paradigms (LLM-as-a-Judge, reference-driven metrics, formal verification, rubric-based assessment, automated UI testing, etc.), with individual domains composing multiple paradigms. Beyond the benchmark itself, we contribute a requirement-to-benchmark construction framework -- a systematic methodology that transforms authentic production requirements into executable evaluation tasks in minimal time. This framework standardizes the entire pipeline from requirement to evaluation, providing a reproducible, modular process that any organization can adopt to construct production-grounded benchmarks for their own domains.

In task-oriented dialogue, a system often needs to follow a sequence of actions, called a workflow, that complies with a set of guidelines in order to complete a task. In this paper, we propose the novel problem of multi-step workflow action prediction, in which the system predicts multiple future workflow actions. Accurate prediction of multiple steps allows for multi-turn automation, which can free up time to focus on more complex tasks. We propose three modeling approaches that are simple to implement yet lead to more action automation: 1) fine-tuning on a training dataset, 2) few-shot in-context learning leveraging retrieval and large language model prompting, and 3) zero-shot graph traversal, which aggregates historical action sequences into a graph for prediction. We show that multi-step action prediction produces features that improve accuracy on downstream dialogue tasks like predicting task success, and can increase automation of steps by 20% without requiring as much feedback from a human overseeing the system.

This paper introduces LegalRikai: Open Benchmark, a new benchmark comprising four complex tasks that emulate Japanese corporate legal practices. The benchmark was created by legal professionals under the supervision of an attorney. This benchmark has 100 samples that require long-form, structured outputs, and we evaluated them against multiple practical criteria. We conducted both human and automated evaluations using leading LLMs, including GPT-5, Gemini 2.5 Pro, and Claude Opus 4.1. Our human evaluation revealed that abstract instructions prompted unnecessary modifications, highlighting model weaknesses in document-level editing that were missed by conventional short-text tasks. Furthermore, our analysis reveals that automated evaluation aligns well with human judgment on criteria with clear linguistic grounding, and assessing structural consistency remains a challenge. The result demonstrates the utility of automated evaluation as a screening tool when expert availability is limited. We propose a dataset evaluation framework to promote more practice-oriented research in the legal domain.

The economic value of inference depends on how capacity and task information are distributed across stages of AI production. We study these organizational margins using controlled workflow experiments on externally verified software-engineering tasks. In two matched resource panels, direct execution records the same success rate of 59.6 percent at logical-token ceilings of 12,000 and 24,000, while success under information-constrained planning rises from 36.2 to 51.2 percent. The planning disadvantage narrows by 15.0 percentage points (95 percent task-cluster bootstrap interval: 4.2 to 25.8). A strict read-only planning campaign varies whether the planner sees the task issue. At 12,000 tokens, issue access raises success by about 16 percentage points over issue-hidden planning. Compared with direct execution, task-informed planning is about 10 points lower at 12,000 tokens; at 24,000 tokens, it shows a 29.6-point advantage. In the resource panels, direct execution uses substantially less than either ceiling, while the planning workflow's binding rate falls from 46.2 to 0.8 percent and downstream execution accounts for 89.9 percent of the increase in total use. Scale determines the capacity available to a system; workflow and information structure shape the productive value

Recent advances in large language models (LLMs) have led to the development of various evaluation benchmarks. These benchmarks typically rely on a single instruction template for evaluating all LLMs on a specific task. In this paper, we comprehensively analyze the brittleness of results obtained via single-prompt evaluations across 6.5M instances, involving 20 different LLMs and 39 tasks from 3 benchmarks. To improve robustness of the analysis, we propose to evaluate LLMs with a set of diverse prompts instead. We discuss tailored evaluation metrics for specific use cases (e.g., LLM developers vs. developers interested in a specific downstream task), ensuring a more reliable and meaningful assessment of LLM capabilities. We then implement these criteria and conduct evaluations of multiple models, providing insights into the true strengths and limitations of current LLMs.

Large language models are increasingly capable of synthesizing executable frontend projects, yet existing benchmarks still treat web generation as a static evaluation problem. We argue that frontend artifacts demand a different paradigm: they are interactive rather than static, admit diverse yet equally valid implementations, and evolve faster than rigid pipelines can accommodate. To address these gaps, we present LiveEvalBench, an automated framework that reformulates web-generation evaluation as an agentic, adaptive, and extensible process. LiveEvalBench instantiates evaluation as a collaborative review workflow, in which a Build Engineer, a Code Engineer, and a UI Tester collectively gather evidence across the full lifecycle of a frontend project, from deployment and code inspection to browser-based interaction. To handle implementation diversity, an adaptive protocol couples shared rubrics for cross-model comparability with implementation-grounded criteria tailored to each artifact. The framework further supports incremental integration of new evaluator roles and assessment dimensions without pipeline redesign. Experiments across diverse real-world web-generation scenarios show that LiveEvalBench aligns closely with human expert judgment and provides fine-grained insights into frontier models' web generation capabilities. Code is available at https://github.com/wyysteelhead/LiveEvalBench